What is the horsepower of the R8?

1 Answers
StEvelyn
07/24/25 3:28am
The horsepower of the R8 is 420 hp. The R8 is a mid-engine sports car equipped with a 4.2-liter V8 FSI engine that delivers a maximum power output of 309 kW at 7,800 rpm and a peak torque of 430 Nm between 4,500 and 6,000 rpm. The Audi R8 features a full-time four-wheel drive system and an Audi Space Frame aluminum body structure, with dimensions of 4,441 mm in length, 1,930 mm in width, and 1,244 mm in height, and a wheelbase of 2,650 mm. The Audi R8 is equipped with xenon headlights, LED taillights, daytime running lights, 18-inch aluminum alloy wheels, an audio system with a 7-inch display, an anti-theft alarm, and a leather/Alcantara combination interior.
Was this review help?
9
1
Share
More Forum Discussions

Why Does the Car Move Without Pressing the Accelerator?

The reasons why a car moves without pressing the accelerator are: manual transmission cars have an idle phase, where they can move at idle speed without pressing the accelerator or the brake; because automatic transmissions do not have a clutch, once the gear is engaged in drive, the car will move even without pressing the accelerator, at a speed of about 15km/h. Driving precautions: 1. Check the vehicle: Before setting off each day, conduct a comprehensive check of the vehicle, including checking for oil or water leaks, inspecting the ground under the car for any oil or water stains, measuring tire pressure to ensure it is appropriate, and checking the engine oil condition. 2. Refuel promptly: Before a long journey, fill up the fuel tank. When the fuel level drops below half during the trip, refuel at a major gas station along the way. Do not wait for the fuel light to come on before looking for a gas station, as this can be very passive. 3. Avoid fatigued driving: For long-distance driving, the primary concern should be to avoid fatigued driving. Fatigued driving is one of the main causes of accidents. If there is a co-driver, it is best to switch every 2 hours. If feeling drowsy, it is advisable to stop and rest for a while, and never force yourself to continue driving.
16
1
Share

Can military personnel obtain a C1 driver's license?

The military cannot obtain a C1 driver's license; they can only obtain a military Class B license. Personnel who obtain a driver's license in the military must exchange it for a civilian driver's license after discharge. They only need to pass a theoretical exam to receive a B2 license. In addition to driving vehicles permitted by a Class C license, a B2 license also allows the holder to drive heavy, medium-duty trucks or large, heavy, and medium-sized specialized operation vehicles. Requirements for upgrading from a C1 to a B2 driver's license: Age between 20 and 60 years old; height not less than 155cm; holding a C1 license for at least 1 year; no record of accumulating 12 penalty points in the current and the previous scoring cycle before application; visual acuity must meet or exceed 5.0 on the logarithmic visual acuity chart; no record of drunk driving or being primarily responsible for a fatal traffic accident while holding a C1 license. Specific process for applying for a B2 driver's license: Apply to the vehicle management office for upgrading to a B2 license; fill out the application form, submit ID and medical examination form, and provide the original copy of the current motor vehicle driver's license; attend the theoretical and practical exams as scheduled; the new license will be issued by the applying vehicle management office within 7 working days after passing the exams.
18
4
Share

What Are the Charging Requirements for New Energy Vehicles?

New energy vehicle charging requirements are as follows: When purchasing a pure electric vehicle, the seller will provide a portable home charging cable that can be plugged directly into a 220V household socket for charging. However, this charger does not support fast charging and can only be used in slow charging mode, typically taking around 8 hours to fully charge. Currently, most pure electric vehicle owners use their cars during the day and charge them at home overnight. Charging precautions for pure electric vehicles: 1. Charge correctly to avoid over-discharging or overusing. Although slow charging takes longer, it is safer and provides better protection for the battery. 2. Follow standard charging procedures. Each time you charge, inspect the charging cable and lines to prevent safety incidents, and always charge according to standard procedures. 3. Power off before unplugging the charging cable. When charging is nearly complete, first turn off the power before removing the charging cable. This helps avoid potential electric leakage and unnecessary harm. 4. Charge in a suitable environment. Charging should be done in a well-ventilated area, as a good charging environment is highly beneficial for the vehicle.
13
0
Share

What is the speed limit for entering a highway ramp?

On highways, the maximum speed on ramps must not exceed 120 kilometers per hour, and the minimum speed must not be lower than 60 kilometers per hour. Precautions for driving on highway ramps: Pay attention to road signs along the way. On highways, be sure to notice the road signs set up in advance near ramp entrances. Avoid 'digging a well when thirsty'—do not stop to check directions only when you reach the ramp entrance. If you miss the exit, continue forward. If you are too close to or have already passed the ramp entrance, do not brake suddenly or reverse, as vehicles behind you may be traveling at high speeds and unable to avoid a collision, leading to a rear-end accident. Use the 'auxiliary lane' when entering or exiting ramps. Since most ramps have a speed limit of 60 kilometers per hour, highways are equipped with an 'auxiliary lane'—either a deceleration or acceleration lane—alongside the main lanes to allow for safe speed adjustments. These lanes are separated from the main lanes by short, thick, and highly visible white markings. Things to note when exiting a ramp: When exiting a highway, change to the right lane in a timely manner. About 500 meters before the exit, turn on the right turn signal, adjust your speed appropriately, and smoothly enter the deceleration lane. On the ramp, be mindful of merging vehicles from other lanes, yield appropriately, and avoid competing for the right of way.
5
0
Share

What car has a logo with two Rs?

The car logo with two Rs is Rolls-Royce. Additional information: 1. Rolls-Royce is an ultra-luxury automobile manufacturer founded in 1906 in the UK by Frederick Henry Royce and Charles Stewart Rolls. Rolls-Royce vehicles are outstanding representatives of top-tier automobiles, renowned worldwide for their luxury, and are one of the primary representatives of European and American automobiles. 2. Besides manufacturing cars, Rolls-Royce is also involved in aircraft engine manufacturing and is an excellent engine manufacturer. Some Airbus aircraft models use Rolls-Royce engines. In 2003, Rolls-Royce Motor Cars was acquired by BMW.
5
1
Share

What does the rear button in the car mean?

The rear button in the car refers to the rear windshield defogger switch. Pressing it can remove fog from the rear windshield. Here are some additional details: 1. The literal meaning of "rear" is the back or rear part. 2. The rear button in the car is usually located on the air conditioning control panel. Extended information: 1. The principle of the rear windshield defogging device is to embed copper wires in the rear windshield. When there is moisture or fog on the rear windshield, an electric current heats up some of the copper wires, warming the windshield and dispersing the fog. 2. According to current car rear windshield defogging designs, pressing the Rear button to activate the rear windshield defogger will automatically turn it off after about 10 minutes of operation, aiming to protect the heating wires.
8
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.