What is the horsepower of the Mitsubishi Eclipse Cross engine?

2 Answers
LeCarlos
07/29/25 9:39pm
The Mitsubishi Eclipse Cross engine has 170 horsepower. The entire Eclipse Cross lineup uses a 1.5-liter turbocharged engine. The 1.5-liter turbocharged engine in the Mitsubishi Eclipse Cross has the model code 4B40, with a maximum torque of 250 Nm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder head and block. In terms of body dimensions, the Mitsubishi Eclipse Cross measures 4405mm in length, 1805mm in width, and 1685mm in height, with a wheelbase of 2670mm. The front suspension of the Mitsubishi Eclipse Cross uses a MacPherson independent suspension, while the rear suspension uses a multi-link independent suspension. The Mitsubishi Eclipse Cross is paired with either a 6-speed manual transmission or a CVT transmission.
Was this review help?
16
5
Share
StKyle
08/15/25 8:52pm
As a young driving enthusiast, I'm quite impressed with the power of the Mitsubishi Eclipse Cross. It typically comes with a 1.5-liter turbocharged engine producing around 150 horsepower. The driving experience is particularly enjoyable, with quick acceleration from standstill, and you can feel the exhilarating push-back sensation whether overtaking on city roads or driving on mountain highways. While it's not a supercar-level SUV, compared to some low-power entry-level models, the Eclipse Cross is tuned more towards sportiness, paired with a responsive CVT transmission. I often use it for short weekend trips - the moderate horsepower doesn't excessively consume fuel, averaging about 7-8 liters/100km. Maintenance is straightforward too, with the turbo engine only requiring regular oil changes for daily upkeep. Overall, this power level makes the driving experience vibrant yet practical.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

How to Call for Rescue When a Motorcycle Breaks Down?

If your motorcycle breaks down, you can call for rescue by dialing the relevant phone number. Here are some related solutions: 1. Fuel tank damage: If you notice a fuel leak from the tank during use, clean the leaking area and apply soap or bubble gum to temporarily seal it. For better results, use epoxy resin adhesive for repair. 2. Oil pipe rupture: In case of an oil pipe rupture, clean the affected area, apply soap, and wrap it with cloth strips or adhesive tape. Secure it tightly with wire and then apply another layer of soap. 3. Oil pipe breakage: If the oil pipe breaks, find a rubber or plastic tube with a matching diameter to connect the broken ends. If the connection is not tight enough, secure both ends with wire to prevent fuel leakage.
19
2
Share

What are the reasons for the car air conditioning compressor not engaging?

The reasons for the car air conditioning compressor not engaging are: 1. The intake air temperature sensor or temperature control sensor in the air conditioning system is damaged, preventing the electrical signal from being transmitted, thus the compressor cannot perform the engaging action; 2. The refrigerant in the car air conditioning compressor is insufficient, the relay has malfunctioned, or the pressure switch has tripped; 3. There is a fault in the compressor circuit. The compressor plays a crucial role in the air conditioning system, with its main tasks being to compress and deliver refrigerant, which causes the compressor to operate in a high-speed rotation state for long periods. Depending on the working method, compressors can generally be divided into reciprocating and rotary types. Common reciprocating compressors include the crankshaft connecting rod type and the axial piston type, while common rotary compressors include the rotary vane type and the scroll type.
8
1
Share

What is the principle of an engine transmission?

The principle of an engine transmission is: each gear has a different transmission ratio, which is equivalent to the meshing of a small gear and a large gear to produce different speeds. When driving at low speeds, a low transmission ratio (3rd gear and below) is used, where the axle speed is lower than the engine speed. According to the formula P=FV, driving force is obtained. At high speeds, a high transmission ratio (4th gear and above) is used, where the axle speed is higher than the engine speed, reducing traction to achieve higher speeds. The transmission consists of a gear transmission mechanism and a control mechanism, and a power output device can be added when necessary. There are two classification methods: by the way the transmission ratio changes and by the control method.
6
5
Share

What is the tire pressure for Wuling Zhiguang?

The tire pressure for Wuling Zhiguang is 2.4 to 2.5 bar. Tire pressure is crucial for tire longevity; both overinflation and underinflation can shorten the tire's service life. Underinflation increases tire body deformation, leads to sidewall cracks, causes flexing motion, and accelerates rubber aging. Overinflation excessively stretches the tire cords, reducing the tire body's elasticity. The Wuling Zhiguang is equipped with a 1.2L L4 naturally aspirated engine, delivering a maximum torque of 108 Nm at 3600 to 4200 rpm. Its dimensions are 3797mm in length, 1510mm in width, and 1820mm in height, with a wheelbase of 2500mm. The top speed reaches 100 km/h, and it uses 165/70R13 tires.
4
1
Share

What does cruise mean and how to use it in a car?

CRUISE in a car refers to the electronic cruise control system. The following is an introduction on how to activate and use cruise control. Activating cruise control: First, press the CRUISE button to activate the cruise module. When the dashboard displays CRUISE, the vehicle must be traveling at a speed of 40 or above to enable cruise control. After reaching 40, press the SET button to activate cruise control. Adjusting speed: Speed adjustments can be made using the + and - buttons. Pushing the lever upward increases the speed, while pushing it downward decreases the speed. Holding it in position will rapidly increase or decrease the speed. Canceling cruise control: Pressing the accelerator or pushing the lever downward will temporarily cancel the function. Releasing the accelerator or pushing the lever inward will automatically restore the function. The CANCEL button is used to deactivate cruise control.
3
1
Share

How to switch from D/S gear to S gear?

To shift from D gear to S gear in an automatic transmission, the vehicle must be completely stationary on the road; otherwise, it may damage the car's automatic transmission. Relevant information is as follows: 1. Starting in P gear: When starting in P gear, it is essential to press the brake pedal. Since the car is just starting, not pressing the brake can easily cause the car to roll. 2. Driving in neutral: When driving in neutral, it is necessary to press the brake. In fact, experienced drivers do not recommend driving in neutral. However, if you must shift to neutral, remember to press the brake to avoid emergencies that cannot be resolved. 3. Shifting from N gear: When shifting from N gear to D gear or R gear, you also need to press the brake. Not pressing the brake can cause the car to lurch forward or stop abruptly, which can cause significant damage to the transmission system.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.