What is the horsepower of the Kia Carens?

What does 'Don't repair the brake pads' mean?

It means the brake pads are no longer usable and need to be replaced. Here is some information about brake pads: 1. Introduction: Brake pads are the friction components specifically used for braking in vehicles. Also known as brake linings. 2. Replacement interval: There is no fixed replacement interval for brake pads. Regular inspections are recommended. For general household vehicles, inspections should be conducted around 30,000-60,000 kilometers, with replacement determined based on wear level. 3. Function: The brake pad's heat insulation layer is made of non-conductive materials to prevent heat transfer. During braking, they are pressed against the brake disc or drum to create friction, thereby slowing the vehicle. Due to friction, the friction material gradually wears out. Lower-cost brake pads tend to wear faster. When the friction material is depleted, the brake pads should be replaced promptly; otherwise, braking effectiveness will be lost and the brake disc may be damaged.

12

0

Share

What is the penalty for traffic violation code 13522?

Driving a motor vehicle other than a medium-sized or above passenger vehicle or a hazardous materials transport vehicle at a speed exceeding the prescribed limit by less than 20% will result in corresponding penalties. Here is some information about traffic violation codes: 1. Explanation of violation codes: Traffic violation codes consist of four digits, classified according to the principles in traffic laws. The sequence from left to right is: one digit for behavior classification, one digit for point deduction classification, and the last two digits as sequential numbers. 2. Brief introduction: The traffic violation code table contains 337 types of violations, including: 175 for motor vehicle traffic, 55 for non-motor vehicle traffic, 30 for pedestrians and passengers, 28 for highway traffic, and 49 for other regulations.

18

4

Share

What are the differences between the Bora R and Bora 1.8T?

The main differences between the Bora R and Bora 1.8T are as follows: 1. Different engine tuning: The Bora R and Bora 1.8T have different engine tuning, with the same engine featuring different software details. The Bora 1.8T takes 9 seconds to accelerate to 100 km/h, while the Bora R only takes 8.6 seconds. 2. Different seats: The luxury version of the 1.8T does not have leather seats, whereas the Bora R comes with leather seats. Additionally, the Bora R features electric adjustment and heating functions. 3. Differences in suspension, tires, and brakes: The Bora R is equipped with better suspension and braking systems. The tires of the Bora R are thinner and wider, resulting in better handling compared to the Bora 1.8T.

18

5

Share

What are the hazards of PEA polyetheramine to engine oil?

PEA polyetheramine does not harm engine oil and does not contaminate it. While effectively controlling carbon deposits in the fuel system and intake system, PEA polyetheramine can significantly reduce carbon deposit formation in the combustion chamber. Polyetheramine, also known as amino-terminated polyether, is obtained through the amination reaction of polyether polyols. In addition to being used as a gasoline detergent, it can also be applied in industries such as epoxy resin curing agents, polyurea, anti-corrosion coatings, and adhesives, playing a very important role in the field of new materials. Due to the relatively high viscosity of PEA polyetheramine, it flows into the fuel tank at a slower rate. Therefore, it is necessary to patiently wait for it to completely flow into the tank before filling up with gasoline, which is equivalent to direct dilution with gasoline, preventing it from sticking to the tank walls. Polyetheramine can also be diluted with a solvent before being added to the fuel tank. The working principles of PEA polyetheramine in eliminating carbon deposits: Dispersion effect: In lubricating oil, it can adsorb small solid particles such as already formed carbon deposits and varnish, dispersing them into a colloidal solution state in the oil, preventing these substances from further aggregating into larger particles that adhere to mechanical parts or deposit as sludge. Dissolution effect: In fuel oil, it can improve the performance and quality of the oil, with excellent oil solubility, no precipitation or stratification, enabling gasoline and diesel fuels to burn more completely and fully in the cylinder, increasing vehicle power performance, enhancing fuel anti-knock properties, reducing vehicle wear, and lowering engine noise. Cleaning effect: Polyetheramine can wash off varnish and carbon deposits already adsorbed on component surfaces, dispersing and suspending them in the oil to be removed through the filter, thereby keeping the metal surfaces of engine pistons and other parts clean and functioning properly. Solubilization effect: Polyetheramine is also a type of amine surfactant, which can solubilize substances that are originally insoluble in oil, such as solids or liquids, into the center of micelles formed by the aggregation of multiple surfactant molecules. During use, it solubilizes oxygen-containing compounds (such as those with hydroxyl, carbonyl, or carboxyl groups), nitro compounds, water, etc., into the micelles to form colloids, preventing further oxidation and condensation, and reducing the formation and accumulation of harmful deposits on engine components. Acid neutralization effect: As an alkaline substance, polyetheramine can neutralize acids generated by the oxidation of lubricating oil, preventing further condensation, thereby reducing high molecular weight polymers. It also prevents these acidic substances from corroding engine components.

17

5

Share

How many days in advance can a motor vehicle undergo its annual inspection?

Motor vehicles can undergo their annual inspection up to 90 days in advance. Below is some information regarding motor vehicle annual inspections: 1. Legal basis: Article 32 of the 'Motor Vehicle Registration Regulations' stipulates that the owner of a motor vehicle may apply for an inspection compliance mark at the vehicle management office of the registration location within three months before the expiration of the motor vehicle's inspection validity period. 2. Consequences: Vehicles that fail to undergo the annual inspection on time and continue to be driven on the road will be fined 200 yuan and penalized with three demerit points. Additionally, the vehicle may be temporarily impounded. In severe cases, the driver's license may be revoked, and the vehicle along with its license plate may be detained until the annual inspection is passed before they can be reclaimed.

6

1

Share

How to adjust the car radio time?

Adjusting the car radio time is done as follows: 1. Long press the TIME button: Press and hold the TIME button, the hour will flash, then rotate the tuning knob to adjust. 2. Short press the TIME button: Briefly press the TIME button again, the minutes will flash, then rotate the tuning knob to adjust. 3. Confirm with TIME button: Finally, briefly press the TIME button to confirm. Below is an introduction to the radio function buttons: 1. POWER/VOL: Press to turn on/off, rotate to adjust volume. 2. TPK/MANU: MP3 track selection and browsing. 3. AST: Press and hold to automatically store radio stations. 4. RPT: Repeat play in CD/USB mode. 5. INT: Browse and play in CD/USB mode. 6. RDM: Random play in CD/USB mode.

15

4

Share

What is the horsepower of the Kia Carens?

What does 'Don't repair the brake pads' mean?

What is the penalty for traffic violation code 13522?

What are the differences between the Bora R and Bora 1.8T?

What are the hazards of PEA polyetheramine to engine oil?

How many days in advance can a motor vehicle undergo its annual inspection?

How to adjust the car radio time?

Is it a violation to cross the stop line during a yellow light?

What engine is used in the Weichai Yingzhi 727?

What does the wrench symbol displayed on the car mean?

What is an Underbody Guard?