What is the horsepower of the Cummins 2.8 engine in the Aumark?

1 Answers
DiLola
09/09/25 3:17am
The 2.8-liter Cummins engine in the Aumark has a horsepower of 130 hp. Introduction to engine horsepower: Horsepower is an important performance parameter of an engine. Horsepower can be converted into power, which is used to measure how much work the engine does per unit of time. The higher the power of the engine, the more work it does per unit of time, the stronger the performance, and the higher the fuel consumption. The power of the engine is related to speed and torque. Engine power calculation formula: The power of the engine refers to the work done by the engine per unit of time. Power is calculated from torque, and the formula is Power (W) = 2π × Torque (Nm) × Speed (rpm) / 60, or Power (kW) = Torque (Nm) × Speed (rpm) / 9549.
Was this review help?
8
4
Share
More Forum Discussions

How to reset the tire pressure warning on Volvo S90?

Volvo S90 tire pressure warning reset steps: First, turn on the ignition switch, then when the TPMS indicator light is on, press the TPMS "SET" button for 1-2 seconds; after the TPMS indicator light goes off, release the "SET" button. What to do if the tire pressure is insufficient: If no damage is visible on the car's tires, simply inflate them to the normal tire pressure and reset the tire pressure system. If inspection reveals a puncture in the car's tire, drive to a repair shop promptly to have the tire patched before reinflating it. If the tire pressure warning reappears some time after inflation but there is no puncture, it may be due to air leakage caused by a deformed wheel rim. It is recommended to check the wheel rim and replace it if necessary. The working principle of the tire pressure monitoring system is: It uses pressure sensors installed inside the tires to measure the tire pressure and wireless transmitters to send the pressure information from inside the tire to the central receiver module.
2
0
Share

What is the solid white line inside the circle?

The solid white line inside the circle is a lane line with fixed directional arrows, also known as a guide lane line. It is set as the lane dividing line at the entrance section of an intersection. Vehicles in this lane should drive according to the direction indicated by the lane direction signs. Those with a fixed driving direction are guide lane lines; those that can change the driving direction according to traffic lights or road signs are variable guide lane lines. The function of the guide lane line: The solid white line inside the circle is a variable guide lane line, mainly designed for sections where traffic is concentrated during peak hours but lanes are insufficient, or where there is a significant difference in traffic flow between morning and evening peak hours. When encountering such a lane, just follow the instructions of the variable lane. There are time restrictions, and the direction of travel cannot be chosen arbitrarily at any time. The variable lane is the lane between the jagged solid white lines; variable guide lanes offer flexibility, unlike ordinary lane indication lines. In ordinary lanes, once you enter the lane, straight means straight, and left turn means left turn. Generally, such lanes are set up in sections with relatively complex traffic.
7
2
Share

What is the torque of the T-Roc?

The maximum torque of the T-Roc is 175 N·m. T-Roc engine specifications: The T-Roc is equipped with two engine options: a 1.2T and a 1.4T. The 1.2T version has a maximum power output of 85 kW and a maximum torque of 175 N·m, while the 1.4T version delivers a maximum power output of 96 kW and a maximum torque of 225 N·m. Vehicle overview: The T-Roc is FAW-Volkswagen's first SUV. The dimensions of this vehicle are 4318 mm in length, 1819 mm in width, and 1582 mm in height, with a wheelbase of 2688 mm. The front fascia of the T-Roc adopts a family-style design, featuring a horizontally stretched front grille decorated with chrome trim strips, and the headlights on both sides resemble a pair of eyes. Overall, it has high recognition and strong coherence.
8
4
Share

Where is the refrigerant filling port of Volvo S60L?

The refrigerant filling port of Volvo S60L is located in front of the pressure water tank, and the low pressure is inside the water collection plate. The following are related introductions: 1. Power introduction: The T5 Zhijin Advanced Edition and T5 Zhiyu Elite Edition are both equipped with Drive-ET5 turbocharged engines, plus an 8-speed automatic manual transmission, with a maximum power of 245 horsepower, a 0-100 km/h acceleration time of 6.4s, and a comprehensive fuel consumption of 6.5L per 100 km. 2. Appearance introduction: The S60L Jinqu Edition has been further optimized in appearance, with a more rugged overall shape, enhanced visual tension, and more stable temperament. The intake grille has been replaced with a vertical waterfall-style chrome grille frame, and chrome decorative strips have been added to both sides of the lower grille, moving closer to Volvo's latest family-style design language while maintaining the elegance and harmony of the S60L. The upper and lower surrounds of the side windows, as well as the rectangular exhaust pipes integrated with the rear bumper, are all decorated with chrome, making the S60L Jinqu Edition sedan more luxurious and fashionable.
9
1
Share

How long does it take to repair a faulty car starter?

It depends on the vehicle. For a four-cylinder engine, it usually takes about four to five days to repair. If the starter malfunctions, the following symptoms may occur: 1. No response when starting the vehicle: This indicates the starter is not working, possibly due to power supply issues, internal open circuit, or short circuit in the starter. 2. Dull sound and low RPM during startup: This is caused by an internal short circuit in the starter, where some coils are shorted and cannot generate sufficient rotational magnetic force to provide the required torque for starting. 3. Motor sound is audible but RPM remains zero: This suggests a fault in the starter's solenoid (the smaller cylindrical part on the starter), which is responsible for pushing the starter gear into engagement with the flywheel. In this case, the starter keeps rotating but fails to drive the flywheel to start the vehicle. 4. Loud noise during startup: This is due to damage in the starter's bearings, carbon brushes, or the surface of the starter gear, causing operational issues. 5. Burning smell: A burning odor from the vehicle's chassis during startup indicates an internal short circuit in the starter, causing overheating of the starter wiring harness or coils.
1
4
Share

Where is the air conditioning located in a van and how to start it?

The following are the location and activation method of the air conditioning in a van: 1. Location: The compressor is driven by a belt on the engine, the condenser is in front of the radiator, the evaporator is inside the control panel, and the air outlets are usually located on both the control panel and the top of the cabin. Some evaporators are positioned in the middle section of the cabin roof. 2. Activation method: Press the A/C cooling switch, adjust the temperature switch to the thickest blue position, and set the air outlet switch to the direct opposite position. Below is an introduction to air conditioning maintenance: 1. Comprehensive inspection of the air conditioning: When using the air conditioning for the first time in summer, inspect the air conditioning system first, such as checking the refrigerant and whether the air filter is too dirty through the liquid storage tank, and whether there are any foreign objects in the radiator. 2. Pay attention to the cleaning of the air conditioning: The air filter should be replaced regularly, otherwise the air conditioning will produce a musty smell. In addition, the condenser should also be cleaned periodically, and the radiator should be removed for thorough cleaning.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.