What is the horsepower of the Camry 2.4?

1 Answers
RhettLynn
07/29/25 8:56pm
The maximum horsepower of the Camry 2.4L is 167Ps. Below is a related introduction to the Camry: 1. Exterior: In terms of exterior design, the eighth-generation Camry features dual styling designs for the luxury and sport versions, both inspired by Toyota's latest "Keen Look" design language. The luxury version adopts a massive trapezoidal horizontal grille, with a streamlined body posture and lower waistline, while the extended rear roof enhances rear headroom. 2. Interior: The interior features an asymmetrical design with a Y-shaped curve on the dashboard. The soft-touch surfaces and metal trim inside the cabin are made of premium materials. For the first time, a three-dimensional surface decoration process (TOM) is applied to the instrument panel and center console trim, creating a visually three-dimensional effect.
Was this review help?
19
5
Share
More Forum Discussions

What does 20t mean for a car?

Car displacement 20t refers to a 1.5T engine, while 28t refers to a 2.0T engine. More information about car displacement is as follows: 1. 2.0T means 2.0 liters, with a maximum power output of 85KW and maximum torque output of 170Nm. This type of engine is a naturally aspirated and multi-point fuel injection engine. 2. 2.0T uses turbocharging technology, with fuel consumption similar to that of a 2.0 engine. The TSI engine adopts turbocharged in-cylinder direct gasoline injection technology, with a maximum power output of 147KW and a sustained maximum torque output of 280Nm over a wide speed range, equivalent to a 2.3L/2.4L naturally aspirated engine.
19
1
Share

Where is the gear position sensor located in the GAC Trumpchi GS4 manual transmission?

GAC Trumpchi GS4 manual transmission speed sensor is generally located inside the distributor, installed on the clutch housing of the transmission, at the front or rear end of the crankshaft, using a pulse signal type speed sensor to measure engine speed. Definition of speed sensor: A speed sensor is a device that converts the rotational speed of an object into an electrical output. It belongs to the category of indirect measurement devices and can be manufactured using mechanical, electrical, magnetic, optical, or hybrid methods. Based on signal type, speed sensors can be divided into analog and digital types. Composition of speed sensor: The speed sensor uses magnetoresistive elements as sensing components, representing a new type of sensor. Its core component employs magnetoresistive elements for detection, combined with advanced signal processing circuitry to reduce noise and enhance functionality. Compared with output waveforms from other types of gear speed sensors, it exhibits minimal speed measurement error and excellent consistency in linear characteristics. The sensing targets are magnetic or magnetically conductive materials such as magnets, iron, and electrical steel.
2
0
Share

What does the EPC light indicate as a fault?

The faults indicated by the EPC light are: 1. Dirty throttle body, which needs to be cleaned promptly; 2. If the brake light also does not illuminate, it is necessary to check whether the brake switch and wiring are functioning properly, or it could be an issue with fuel quality; 3. A malfunction in the engine management system or electronic control, which is often caused by poor fuel quality or a dirty driving environment. In such cases, it is advisable to promptly visit a maintenance service station for inspection and repair. If it is an ECU fault or a sporadic false alarm, the issue can potentially be resolved by reprogramming the ECU's relevant data, or the owner can try turning off and restarting the vehicle to see if the EPC light remains illuminated. If it does not light up again, there is no problem. The EPC indicator light typically illuminates when the ignition is turned on, during the vehicle's self-check, and should turn off after a few seconds. If it remains on after the vehicle is started, it indicates a fault in the vehicle's mechanical or electronic systems.
15
0
Share

Does the Aged Rubber Seal Under the BMW Windshield Need Replacement?

BMW's aged rubber seal under the windshield needs replacement. The risks of not replacing it include: firstly, it looks unsightly; secondly, it may obstruct vision and lead to accidents; thirdly, it fails to block wind, allowing water to enter the vehicle; and fourthly, broken glass fragments can cause bodily harm. Protecting the Windshield: Proper use of windshield washer fluid can address visibility issues caused by a blurry windshield during driving. For regular windshield maintenance, it's essential to select the appropriate washer fluid based on seasonal variations. Applying a windshield film with over 70% light transmittance can protect the windshield without compromising driving safety. Additionally, choosing a film with a high UV protection index helps safeguard dashboard components from premature aging due to prolonged sun exposure. Meaning of Glass Insurance: Glass insurance is a type of commercial insurance where the insurer covers the loss from broken glass of the insured vehicle during use. Glass breakage refers to damage exclusively to the windshield and window glass (excluding headlights and mirror glass) of the insured vehicle.
15
0
Share

How to Deal with the Malfunction of the Left Rear Window?

Left rear window malfunction is usually caused by a faulty switch, which requires replacement. The power window system consists of components such as the window, window regulator, motor, relay, and switch. More information about the power window system is as follows: 1. Generally, the power window system is equipped with two sets of control switches. One set is installed on the dashboard or the driver's side door armrest, serving as the master switch, which allows the driver to control the movement of each window. The other set is installed on each passenger door, serving as individual switches that can be operated by passengers. 2. Typically, the master switch also includes a circuit breaker. If it is turned off, the individual switches will not function. Power windows are a very convenient feature, especially at parking toll booths or when ordering takeout at fast-food restaurants. Their mechanical structure is not overly complex, with lubrication being the main aspect of maintenance. However, since the mechanical components are located inside the door panel, the inner cover needs to be removed for servicing.
11
2
Share

How many cylinders does the Volvo S90 have?

Volvo S90's engine is a four-cylinder. Here are the relevant details: 1. The domestically produced version of the car uses two types of engines: one is a low-power version 2.0-liter turbocharged engine, and the other is a high-power version 2.0-liter turbocharged engine. The low-power version engine has 190 horsepower and a maximum torque of 300 Nm, while the high-power version engine has 254 horsepower and a maximum torque of 350 Nm. 2. The imported version of the car has stronger power. The imported version is equipped with a 2.0-liter twin-charged engine. A twin-charged engine has both a supercharger and a turbocharger, allowing the engine to use different charging methods under different working conditions.
5
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.