What is the horsepower of the Borgward BX7?

3 Answers
McBella
07/28/25 1:25pm
The Borgward BX7 is equipped with a 2.0-liter turbocharged engine, which delivers 224 horsepower. Below are some details about the Borgward BX7: 1. The 2.0-liter turbocharged engine of the Borgward BX7 produces 224 horsepower and a maximum torque of 300 Nm. This engine can output its maximum power at 5,500 rpm and reach its peak torque between 1,500 and 4,500 rpm. It features direct fuel injection technology and uses an aluminum alloy cylinder head and block. The engine is paired with a 6-speed automatic transmission. 2. The Borgward BX7 uses a MacPherson strut independent suspension at the front and a multi-link independent suspension at the rear.
Was this review help?
4
2
Share
OGrant
08/11/25 6:04pm
I've been driving the Borgward BX7 for a while now, with its 224 horsepower, and it runs smoothly both in the city and on the highway. The acceleration is crisp, and the 2.0T turbocharged engine responds very sensitively. For daily commuting, the fuel consumption is about 10 liters per 100 kilometers, which is more fuel-efficient than I expected. Occasionally taking my family out for a trip, it handles uphill climbs effortlessly. I've compared it to peers like the Haval H6 or the Volkswagen Tiguan, and I feel that 224 horsepower is quite practical for a midsize SUV—it's not overly aggressive but ensures safe overtaking. The engine is also easy to maintain; regular oil changes keep it in good condition. Overall, it's a reliable choice for family use.
Was this review help?
6
3
Share
Expand All
OAlessandra
09/28/25 8:38am
As someone who has been following cars for a long time, the Borgward BX7's 224 horsepower is quite substantial on paper, thanks to its 2.0-liter turbocharged engine. Horsepower directly affects acceleration and climbing ability. I've test-driven it several times, especially on the highway, where I could feel the smooth power delivery when stepping on the throttle. The engine design and cooling system are well done, preventing overheating even on long drives, which gives peace of mind. During routine maintenance, just pay attention to checking the engine belt and spark plugs. The 224 horsepower is sufficient for daily driving. If you feel it's low, you can easily fine-tune it by flashing the ECU, but the factory settings are the most balanced.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

Where is the window regulator control module of JAC Refine S3 located?

Refine S3's window regulator control box is located inside the protective panel under the steering wheel. A car lift is installed on the vehicle, mainly used for field wiring and streetlight maintenance. Exterior design: The front face continues JAC's vase-mouth design, incorporating urban crossover SUV design elements, presenting an overall fashionable and vibrant appearance. The grille features three prominent chrome strips, complemented by front and rear light designs and window lines. The windows and lower door sills are adorned with chrome decorations. Powertrain: Equipped with a 4GB1.5L engine delivering rated power of 83kW/6000rpm, maximum torque of 146Nm, and low-end torque reaching 100Nm. The transmission options paired with the engine include 6MT and CVT gearboxes, reducing fuel consumption to 6.5L per 100km.
16
2
Share

Does Overfilling Brake Fluid Have Any Impact?

Overfilling brake fluid does have certain impacts. While it does not pose any harm to braking performance, the excess brake fluid may overflow from the reservoir opening, contaminating the engine compartment and potentially affecting certain components, given that brake fluid is highly corrosive. Below is an introduction to three scenarios related to brake fluid levels: Overfilled: When brake fluid is overfilled, the excess should be promptly extracted. Insufficient: When a shortage of brake fluid is detected, it is essential to replenish the reservoir with the correct specification of brake fluid as soon as possible, since brake fluid directly affects the entire braking system. Normal: Under normal circumstances, the brake fluid level should not fall below the minimum mark. Although brake fluid is consumed during vehicle operation, the consumption rate is extremely low.
8
0
Share

What does the dripping oil can warning light mean in a car?

The dripping oil can warning light in a car is the engine oil warning light. The method to reset it is: 1. Turn off the ignition switch and hold the set button; 2. Turn on the ignition switch and press the button on the left side of the instrument panel. Engine oil, also known as engine lubricant, is composed of base oil and additives. It serves to lubricate and reduce friction in the engine, assist in cooling, provide sealing to prevent leaks, prevent rust and corrosion, and cushion vibrations. The reasons for the oil light coming on include: 1. Insufficient oil level; 2. Engine temperature being too high; 3. Oil pump wear causing abnormal operation; 4. Improper internal engine assembly; 5. Excessive carbon buildup clogging the oil filter; 6. Pressure relief valve set pressure being too low or improperly adjusted.
1
3
Share

When Should I Change the Oil for My New Car?

For a newly purchased car, the oil should be changed at around 5,000 kilometers. The method for changing the oil is as follows: 1. Use a jack to lift the vehicle, locate the oil drain bolt, and loosen it to drain the oil; 2. After removing the oil filter, place a container underneath it; 3. Replace with a new oil filter and add new oil. The functions of engine oil include: 1. Reducing friction and high temperatures; 2. Cooling and lowering temperature; 3. Cleaning and purifying; 4. Damping and cushioning; 5. Preventing rust and corrosion. Engine oil, also known as motor lubricant, is composed of base oil and additives. The base oil is the main component of the lubricant, determining its basic properties, while the additives compensate for and improve any deficiencies in the base oil's performance.
9
3
Share

What causes the engine to shake and the fault light to come on?

The reasons for the engine shaking and the fault light coming on are: 1. Excessive carbon deposits in the throttle or engine; 2. Oxygen sensor failure; 3. Fuel injector leakage; 4. Engine knocking; 5. Poor fuel quality. The solutions for the engine fault light coming on are: 1. Clean the throttle or engine interior; 2. Replace the oxygen sensor; 3. Replace the fuel injector; 4. Replace the engine; 5. Use higher-grade fuel. The maintenance methods for the engine are: 1. Use high-quality engine oil; 2. Use qualified coolant; 3. Regularly clean the radiator scale; 4. Regularly remove carbon deposits from the car; 5. Replace the car's three filters on time; 6. Maintain a reasonable engine speed.
18
0
Share

Is the car under whose name the vehicle license is registered?

The car belongs to the person whose name is on the vehicle license. Below is relevant information about the vehicle license: Composition: The vehicle license consists of three parts: the license holder, the main page, and the supplementary page. The front of the main page contains the endorsed certificate core, while the back features the vehicle photo, sealed in a plastic sleeve. The supplementary page is the endorsed certificate core. Function: Possessing the 'Motor Vehicle License' is one of the prerequisites for a vehicle to be driven on the road. Driving without carrying the vehicle license is a violation. The 'Owner Name' column on the 'Motor Vehicle License' is not just a matter of name; the registered owner on the license is the legally recognized owner of the vehicle, with the right to legally use and dispose of the property. In the event of traffic accidents or economic disputes, they are also the legally responsible party.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.