What is the horsepower of the Bestune T77?

What does a kettle and a drop of water mean in a car?

A kettle with a drop of water is the symbol for the engine oil warning light. Here are the relevant details: Hazards: Only normal oil pressure can ensure that oil is delivered to all friction surfaces of the engine. Pressure that is too high or too low will affect the normal operation of the engine and may even cause damage to engine components. Therefore, when the oil light comes on, the engine should be stopped immediately to identify the cause, and work should only continue after the issue has been resolved. Reasons for the warning: Insufficient oil quantity, which reduces the oil pump's output or prevents it from pumping oil due to air intake, leading to a drop in oil pressure. Overheating of the engine can thin the oil, causing it to leak excessively through the gaps and resulting in decreased oil pressure. Damage to oil pump components or excessive gaps due to wear, assembly issues, etc., can cause the oil pump to fail to deliver oil or deliver insufficient oil. Improper clearance between the crankshaft and the bearings—too tight will increase oil pressure, too loose will decrease it. Clogged oil filters or oil pickup screens can also reduce oil pressure, among other issues.

18

3

Share

Can You Still Drive with the Engine Yellow Light On?

You can drive with the engine warning light (yellow) on, but you should get it checked as soon as possible. The engine fault signal is issued by the ECU (Engine Control Unit), which controls all the electronic components of the engine, such as the electronic throttle, fuel injectors, alternator, fuel pump, etc. It covers various systems including intake, exhaust, fuel, ignition, and timing. If the engine warning light is on, you must visit a nearby repair shop for inspection. There are two scenarios when the engine yellow light appears on the car dashboard, as described below: The first scenario occurs when the car's power is turned on: The vehicle performs a self-check, during which not only the engine yellow light but also other warning lights will illuminate and then turn off together. This is a normal phenomenon. The second scenario occurs after the car is started: If the engine fault yellow light remains on, this indicates that the ECU is alerting you to an engine fault, which is an abnormal condition.

13

3

Share

What does the flashing 'rec' on a dash cam mean?

When the 'rec' on a dash cam flashes, it indicates that the device is currently recording or capturing video. 'rec' is an abbreviation for the English word 'Recording,' signifying that the dash cam is in the process of recording. Nowadays, dash cams have become an essential safety device for every private car owner. Below is some relevant information about dash cams: Definition: A dash cam is a device that records images, sounds, and other relevant information during vehicle travel. Once installed, it can document the entire driving process in video and audio, providing evidence in the event of a traffic accident. For those who enjoy road trips, it can also be used to record the journey through challenging terrains. While driving, it continuously records videos, along with timestamps, speed, and location data, functioning much like a 'black box.' It can also be used at home as a DV camera to capture life's moments or serve as a home surveillance system. Functions: It safeguards drivers' legal rights. In case of a collision with pedestrians, cyclists, or motorcyclists crossing the road, drivers might face extortion attempts. A dash cam can provide valid evidence to protect the driver. Reviewing the recorded footage makes accident responsibilities clear, allowing traffic police to handle incidents quickly and accurately. This enables swift clearance of the accident scene to restore traffic flow while preserving crucial evidence from the incident, contributing to a safe and smooth traffic environment.

7

5

Share

Can You Directly Switch to Manual Mode Using Paddle Shifters?

Using paddle shifters is essentially switching from automatic to manual transmission, primarily used during overtaking to provide the vehicle with more robust power. However, the switching process varies among different car models. Some vehicles allow direct use in D (Drive) mode, while others require pressing a manual mode button, though the effect remains the same. Typically, vehicles have five gears: P (Parking), R (Reverse), N (Neutral), D (Drive), and S (Sport). Below are the relevant details: P (Parking) - Parking/Starting Gear: Used when the vehicle is parked and not in use. In this position, the wheels are mechanically locked to prevent rolling. The vehicle must be completely stopped before engaging P gear; otherwise, the mechanical parts of the automatic transmission may be damaged. R (Reverse) - Reverse Gear: Used for reversing. Never force the gear into "R" before the vehicle comes to a complete stop, as this can severely damage the transmission. N (Neutral) - Neutral Gear: Used for temporary stops (e.g., at traffic lights). This position indicates neutral. To prevent the vehicle from rolling on a slope, always engage the brake. D (Drive) - Forward Gear: Used for normal driving on regular roads. S (Sport) - Sport Mode: When engaged, gears can be freely switched, but the shift timing is delayed to maintain higher engine RPMs for increased power. This mode results in higher fuel consumption.

9

5

Share

Is driving at 90 in an 80 speed limit zone on the highway considered speeding?

Driving at 90 in an 80 speed limit zone on the highway is considered speeding. Exceeding the speed limit from 80 to 90 will result in a 3-point deduction. According to the "Scoring Standards for Road Traffic Safety Violations," if a motor vehicle is driven on the highway at a speed exceeding the prescribed limit by less than 20%, the traffic management department of the public security organ will impose a 3-point penalty on the driver. Driving at 90 in an 80 zone exceeds the speed limit by 12.5%, hence the 3-point deduction. Introduction to penalties for speeding in highway interval speed detection: According to regulations, speeding less than 10%: a warning will be issued without point deduction or fine; speeding between 10% and 20%: 3 points will be deducted and a fine will be imposed; speeding between 20% and 50%: 6 points will be deducted and a fine will be imposed; speeding more than 50%: 12 points will be deducted, a fine will be imposed, the driver's license will be temporarily suspended, and the driver will be required to attend training.

20

1

Share

Where are the A-pillar and B-pillar located?

The A-pillar refers to the vertical pillars on both sides of the car's front windshield; the B-pillar refers to the vertical pillars between the front and rear doors, connecting the car's roof and chassis. The passenger compartment of a car is composed of the A-pillar, B-pillar, C-pillar, roof side rails, and roof, which must be very sturdy to protect the occupants in the event of a collision. The car body is made up of the body frame and body panels. The body panels include the front and rear bumpers, engine hood, trunk lid, front fenders, four doors, roof, and rear fenders, which are welded to the body frame. Therefore, the roof and rear fenders also belong to the body frame.

17

4

Share

What is the horsepower of the Bestune T77?

What does a kettle and a drop of water mean in a car?

Can You Still Drive with the Engine Yellow Light On?

What does the flashing 'rec' on a dash cam mean?

Can You Directly Switch to Manual Mode Using Paddle Shifters?

Is driving at 90 in an 80 speed limit zone on the highway considered speeding?

Where are the A-pillar and B-pillar located?

How Far Can You Drive with a Cracked Oil Pan?

What does it mean when the brake warning light is on in a Haval vehicle?

Do China VI Cars Have Particulate Filters?

Why can't the motor tricycle start or be kick-started?