···
Log in / Register

What is the horsepower of the Audi TTRS?

4 Answers
BradyFitz
07/24/25 7:42pm
The horsepower of the Audi TTRS is 400 PS. The engine of the Audi TTRS has a maximum torque of 480 Nm, with a maximum power speed ranging from 5,850 to 7,000 rpm and a maximum torque speed ranging from 1,700 to 5,850 rpm. This engine is equipped with hybrid injection technology and uses an aluminum alloy cylinder block, offering not only strong power but also excellent reliability and durability. In terms of body dimensions, the Audi TTRS is the high-performance version of the Audi TT, with a length of 4,194 mm, width of 1,832 mm, height of 1,367 mm, and a wheelbase of 2,502 mm.
Was this review help?
13
3
Share
MacRuby
08/10/25 9:05am
Recently, I've been obsessed with performance cars, especially the Audi TTRS, which boasts 400 horsepower—just hearing that gets my blood pumping. Its 2.5-liter turbocharged five-cylinder engine is absolutely ferocious; stomping on the gas delivers an intense kick of acceleration, rocketing from 0 to 100 km/h in around 3.7 seconds—way faster than any regular car I've driven. Daily fuel consumption is slightly higher, averaging about 12 liters per 100 km in the city, but on the highway, it's pure exhilaration, with the quattro all-wheel-drive system gripping the road like a beast, no fear of slipping. The engine growls with a deep, powerful roar, feeling like a wild animal, and the handling on mountain roads is simply perfection. As an enthusiast, I think 400 horsepower is just right for a compact sports car—not too wild to control, yet still capable of delivering occasional thrills on open roads. Regular maintenance is key, checking the turbocharger and brake pads to ensure safe driving.
Was this review help?
17
1
Share
Expand All
McJake
09/26/25 4:10am
As someone who frequently deals with car maintenance, I've noticed that the Audi TT RS is set at around 400 horsepower, and this number isn't arbitrary. It stems from a 2.5-liter inline five-cylinder turbocharged engine, designed to balance performance and durability. The five-cylinder layout reduces vibration while retaining a distinctive roar. During actual repairs, I've found that with higher horsepower, special attention must be paid to the cooling system, and oil changes should be more frequent to avoid overheating issues. Fuel consumption in city driving can reach 11-13 liters per 100 kilometers, but the power output remains stable, aided by Audi's quattro all-wheel-drive system for strong traction. Owners often overlook brake disc wear—high-horsepower cars accelerate and brake quickly, leading to faster wear. It's recommended to inspect them every 20,000 kilometers. A related suggestion is that if buying a used TT RS, check the engine's history first to avoid purchasing one that's been excessively modified, potentially damaging the original setup.
Was this review help?
6
1
Share
Expand All
DiArya
11/09/25 6:13am
I've owned this TTRS for over two years now. The 400 horsepower makes driving truly exhilarating, and daily commuting isn't too demanding. The average fuel consumption is 10 liters per 100 kilometers. Occasionally accelerating to overtake gives you that thrilling push-back feeling. The engine is a 2.5-liter five-cylinder with turbocharging, producing a deep and non-intrusive sound. Compared to the regular TT, the increased horsepower makes handling more agile, and it remains stable at high speeds without fear of crosswinds. Weekend mountain road trips are exciting, but you'll need to use high-performance tires more often, otherwise cornering can be challenging.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

What are the symptoms of a damaged Audi Q5 CV joint?

If the car's CV joint is damaged, there will be regular abnormal noises during normal steering or when driving over bumps. In severe cases, it may even lead to a loss of power. Introduction to the CV joint: The CV joint, also known as the constant velocity joint, connects the axle shaft to the wheel. It is a crucial component in the car's drivetrain system, ensuring continuous power transmission to the wheels in any direction, especially when the wheels are bouncing. Methods to determine CV joint damage: You can intermittently accelerate and release the throttle to feel if there is any play in the front axle's CV joint. If the CV joint has excessive play, the front wheels may slightly shake during acceleration, and there will be a noticeable power transition when releasing the throttle.
16
1
Share

Why does the Audi auto start-stop system shake significantly?

Audi auto start-stop system shakes significantly due to: poor tire balance condition, wheel rim deformation, etc. Poor tire balance condition: If slight shaking or deviation of the car body is noticed during driving, it is generally caused by tire issues. The first possibility is poor tire balance condition, which requires the owner to perform a four-wheel alignment and dynamic balance as soon as possible. If the vehicle does not deviate, performing a tire dynamic balance will suffice. Wheel rim deformation: Another more serious condition may be caused by wheel rim deformation, which requires the owner to visit a professional repair shop for inspection. This condition generally occurs in vehicles that have been in use for a long time.
20
3
Share

How long can a Haval H9 run on a full tank of gas?

Haval H9 can run 800 kilometers on a full tank of gas, with an average fuel consumption of 7.9L. The following introduces the factors affecting fuel consumption: Good vehicle condition is the foundation of fuel efficiency: In addition to paying attention to the cleanliness of the car, you should also pay attention to the correct maintenance of the car, such as lubricating the wheel hub bearings on time, regularly replacing the air filter element, and promptly checking the condition of the car brakes. Incorrect driving habits can lead to a multiple increase in fuel consumption: As cars become more widely used in households, there are more and more non-professional drivers in China. Some drivers' bad driving habits can lead to increased fuel consumption.
2
4
Share

What does D+- mean in an automatic transmission?

Automatic transmission D+- represents the manual mode of an automatic transmission, indicating that the vehicle is equipped with a semi-automatic transmission that combines both automatic and manual shifting functions. Here is some relevant information about semi-automatic transmissions: 1. The reason for the development of semi-automatic transmissions: Traditional automatic transmissions offer superior operability and driving comfort but lack the engaging driving experience of manual transmissions. Semi-automatic transmissions were developed to address this issue, combining the advantages of both automatic and manual transmissions. 2. The function of D+- in automatic transmissions: In addition to automatic shifting, D+- also provides manual shifting capability, freeing drivers from the limitations of traditional automatic transmissions. This allows drivers to enjoy the freedom of manual gear shifting while still benefiting from the comfort of an automatic transmission.
9
4
Share

What kind of glass does Geely use?

Geely's original front windshield glass is Fuyao glass. If you need to replace the glass, it is recommended to go to a 4S shop for replacement. Do not attempt to dismantle it yourself blindly, as it may easily damage the glass. The function of car glass: Car glass is an essential part of the vehicle's body accessories, mainly serving a protective role. Classification of car glass: Car glass can be mainly divided into the following three types: laminated glass, tempered glass, and regional tempered glass, which can withstand strong impact forces. According to their positions, car glass is divided into four types: front windshield glass, side window glass, rear windshield glass, and sunroof glass.
18
2
Share

What is the formula for calculating actual fuel consumption?

Calculate the fuel consumption per 100 kilometers using the formula: Fuel consumption per 100 km = Volume of fuel consumed (liters) ÷ Distance traveled (kilometers) × 100. Here are specific methods to reduce fuel consumption: 1. Lightly press the accelerator: The initial low-speed acceleration phase is the peak fuel consumption period, so gently pressing the accelerator to prevent excessively high RPM can effectively reduce fuel consumption. 2. Avoid high RPM: Try to avoid unnecessary high RPM, as fluctuating engine speeds can significantly increase fuel usage. 3. Regular maintenance: Change the engine oil and remove carbon deposits. 4. Avoid emergency braking: Anticipating road conditions not only enhances driving safety but also saves fuel, such as gradually slowing down before traffic lights and utilizing inertia to coast.
20
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.