What is the horsepower of the Alphard engine?

Which country does the Baojun brand belong to?

Baojun is an independent automotive brand established in 2010 by SAIC-GM-Wuling, a joint venture that fully integrates the superior resources of SAIC, General Motors, and Wuling. The main models of Baojun include Baojun 630, Baojun 610, Baojun 510, Baojun 530, Baojun 730, Baojun 360, Baojun 310, Baojun 310W, as well as Baojun E100 and Baojun E200. The logo of Baojun is a classic shield-shaped emblem, primarily featuring silver metallic lines as the main color with green as the secondary color. The color scheme is simple and elegant, with the silver metallic lines embodying the distinct trademark attributes of the automotive industry, while the green represents SAIC-GM-Wuling's philosophy of 'low-carbon and environmental protection'. Key milestones in Baojun's development are as follows: In 2011, Baojun's first model, the Baojun 630, was officially launched, positioned as a 'new family sedan with international quality'. In 2008, Baojun won the 'Best Automotive Enterprise Award' for having the best reputation among car users. In 2014, the family MPV Baojun 730 quickly rose to the top three in MPV market sales, with cumulative sales exceeding 900,000 units. In 2021, Baojun's latest new energy model, the KiWi-EV, was officially launched under the SAIC-GM-Wuling brand.

12

5

Share

What is the tire pressure for Civic?

The tire pressure range for Civic is 2.4-2.5 bar. Due to seasonal factors, the tire pressure can be appropriately increased by 0.2 bar in winter and reduced by 0.1 bar in summer. This data is based on the international GBT2978-2008 standard requirements. The Civic's tire pressure is displayed on the dashboard near the driver's position. While driving, it helps determine if one or more tires are significantly underinflated, which will trigger the tire pressure monitoring system indicator light and display a warning message on the driver information interface. Generally, a tire pressure exceeding 2.8 bar is considered too high, while a pressure below 2.0 bar is too low. Hazards of overinflated tires: Reduced tire friction and adhesion, affecting braking performance; causes steering wheel vibration and deviation, decreasing driving comfort; accelerates wear on the central tread pattern, shortening tire lifespan; increases vehicle vibration, indirectly affecting other components' longevity; overstretches tire cords, reducing elasticity and increasing load during driving. Hazards of underinflated tires: Increased friction coefficient with the road surface, leading to higher fuel consumption; makes steering heavy and prone to deviation, compromising driving safety; increases movement in tire sections, causing abnormal heat from excessive rolling; weakens cord and rubber functions, leading to delamination or cord breakage and excessive friction with the rim, damaging the tire bead area and causing abnormal wear; multiplies friction with the ground, rapidly raising tire temperature, softening the tire, and drastically reducing strength. High-speed driving may result in a blowout. If the tire pressure monitoring indicator light illuminates (a yellow symbol with an irregular circle, no seal on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: Typically triggers an alarm when below 1.8 bar or above 3.0 bar. Immediate tire inspection and pressure adjustment are required. Tire pressure monitoring not reset: After inflating the tires, failing to reset the tire pressure monitoring system causes it to retain old data, lighting the indicator. Simply reset the tire pressure to resolve this. Damaged tire pressure sensor: The sensor, installed inside the tire and connected to the inflation valve, monitors tire pressure. If damaged during driving (e.g., by impact), it triggers the warning light. A damaged sensor must be replaced with a new one.

20

3

Share

What is the tire pressure for a Ford Focus?

Ford Focus normal tire pressure range is 2.4-2.5bar. Due to seasonal factors, winter tire pressure can be appropriately increased by 0.2bar, while summer pressure can be reduced by 0.1bar. This data complies with the international GBT2978-2008 standard requirements. The Ford Focus tire pressure monitoring function displays all tire values on the dashboard. The Focus tire pressure monitoring system automatically monitors tire pressure in real-time during driving, alerts for tire leaks and low pressure, and illuminates the system fault indicator to ensure driving safety. Generally, tire pressure exceeding 2.8bar is considered too high, while pressure below 2.0bar is too low. Hazards of overinflation: Reduced tire friction and adhesion affects braking performance; causes steering wheel vibration and deviation, reducing driving comfort; accelerates wear on central tread patterns, shortening tire lifespan; increases vehicle vibration, indirectly affecting other components' longevity; overextends tire cords, reducing elasticity and increasing driving load. Hazards of underinflation: Increased friction coefficient with road surface raises fuel consumption; creates heavy steering and deviation hazards; excessive tire movement causes abnormal heat generation; weakens cord and rubber functions, leading to delamination or cord breakage; multiplied ground friction rapidly raises tire temperature, softening rubber and drastically reducing strength. High-speed driving may cause blowouts. If the tire pressure warning light illuminates (a yellow icon showing an irregular circle without top seal, with four small spikes below and exclamation mark inside), there are typically three causes: Abnormal tire pressure: Usually alerts when below 1.8bar or above 3.0bar. Requires immediate tire inspection and pressure adjustment. Unreset monitoring system: After inflation, failure to reset the system maintains old data, triggering the warning light. Simply perform a pressure reset. Faulty pressure sensor: These internal sensors connected to tire valves may get damaged by road impacts, triggering the warning light. Damaged sensors require complete replacement.

2

3

Share

How Many Cylinders Does the Volkswagen Lavida Engine Have?

The Volkswagen Lavida's engines are all four-cylinder engines, utilizing German technology but manufactured at FAW-Volkswagen's Dalian plant in China, making them domestically produced engines. The Volkswagen Lavida 1.5L naturally aspirated engine model is EA211-DMB, with a maximum output torque of 150Nm. The 1.2L turbocharged engine model is EA211-DJN, with a maximum output torque of 200Nm. The 1.4L turbocharged engine model is EA211-DJS, with a maximum output power of 110kW and a maximum torque of 250Nm. Here are some daily maintenance methods for the Volkswagen Lavida's engine: Use lubricating oil of the appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices in the intake and exhaust systems and usage conditions. For diesel engines, choose CB--CD grade diesel engine oil according to the mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances accumulate in the filter. If the filter becomes clogged and oil cannot pass through, it may rupture the filter or open the safety valve, allowing oil to bypass through the bypass valve, carrying contaminants back to the lubrication areas and accelerating engine wear and internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

17

5

Share

What are the methods for automotive circuit maintenance and inspection?

Here are the methods for automotive circuit maintenance and inspection: 1. Visual Diagnosis Method: When a car circuit malfunctions, abnormal phenomena such as smoke, sparks, unusual noises, burnt smells, or overheating may occur. These phenomena can be directly observed to determine the location of the fault. 2. Open Circuit Method: When a short circuit (grounding) fault occurs in automotive circuit equipment, the open circuit method can be used for judgment. By disconnecting the suspected circuit section and observing whether the grounding fault persists in the electrical equipment, the location and cause of the circuit grounding can be determined. 3. Short Circuit Method: For open circuit faults in automotive circuits, the short circuit method can also be used. This involves short-circuiting the suspected open circuit section with a screwdriver or wire and observing changes in the instrument pointer or the working condition of the electrical equipment to determine if there is an open circuit fault. 4. Test Lamp Method: This method uses an automotive bulb as a test lamp to check for open circuit faults in the circuit. 5. Instrument Method: Observe the indications on the car's instrument panel, such as the ammeter, water temperature gauge, fuel gauge, and oil pressure gauge, to determine if there is a circuit fault. For example, if the water temperature gauge shows full scale and does not move when the ignition switch is turned on with the engine cold, it indicates a fault in the water temperature sensor or a grounding in the circuit. 6. Low-Voltage Grounding Spark Test Method: This involves removing a wire from the electrical equipment and touching it to the car's metal part (grounding) to produce sparks for judgment. This method is relatively simple and commonly used by automotive electricians. The grounding spark test can be divided into direct grounding and indirect grounding. Direct grounding produces strong sparks without passing through a load. For example, to check if the circuit from the ignition coil to the battery is faulty, disconnect the wire connecting the ignition switch from the ignition coil and scrape it against the car body or frame. If there are strong sparks, the circuit is normal; if not, there is an open circuit. Indirect grounding produces weak sparks through a load to determine if there is a fault in the circuit or load. For example, grounding the connection wire of a traditional ignition system breaker. If sparks occur, the circuit is normal; if not, there is an open circuit. It is important to note that the spark test method should not be used on electronic circuit vehicles. 7. High-Voltage Spark Test Method: Perform a grounding spark test on the high-voltage circuit and observe the spark condition to judge the working condition of the ignition system.

7

1

Share

Will Traffic Police Check Triangular Navigation Lights?

Traffic police will check. Installing navigation lights on vehicles is considered unauthorized modification of vehicle lighting, which is not permitted. Additionally, such modifications will cause the vehicle to fail inspection. According to the Road Traffic Safety Law, unauthorized modification of vehicle lighting is subject to penalties. The hazards of unauthorized vehicle lighting modifications are as follows: 1. Front-mounted auxiliary lights: Vehicles with front-mounted auxiliary lights may interfere with the vision of oncoming drivers during encounters, potentially causing temporary vision loss. 2. Rear-mounted auxiliary lights: Vehicles with rear-mounted auxiliary lights can create visual blind spots for drivers behind or to the side due to intense glare.

9

1

Share

What is the horsepower of the Alphard engine?

Which country does the Baojun brand belong to?

What is the tire pressure for Civic?

What is the tire pressure for a Ford Focus?

How Many Cylinders Does the Volkswagen Lavida Engine Have?

What are the methods for automotive circuit maintenance and inspection?

Will Traffic Police Check Triangular Navigation Lights?

Difference Between GLE and ML?

What is the emission standard of Changan CS35?

How many cylinders does the GS3 Trumpchi engine have?

How Many Cylinders Does the 2016 Lingpai Engine Have?