What is the history of the Nissan brand?

1 Answers
DelEmiliano
07/29/25 7:06pm
Nissan Motor is a company engaged in automobile manufacturing, shipbuilding, and aerospace technology, established in 1933. Introduction to Nissan: Nissan, officially known as "Nissan Motor Company," is a Japanese multinational automobile manufacturer listed on the Tokyo Stock Exchange. In 2019, Nissan sold approximately 5.18 million vehicles, primarily under its core brand Nissan (known colloquially in China as "Nissan") and the luxury brand Infiniti. China is Nissan's largest single market, contributing about 1.54 million vehicle sales in 2019. Nissan's sales in China are mainly driven by its joint venture, Dongfeng Nissan, which ranked fifth in domestic passenger car manufacturer sales in 2019. Brand Introduction: The history of Nissan Motor dates back to 1933 when it started producing DATSUN compact trucks, spanning over 70 years. However, before World War II, Nissan was still in its early development stage, with slow progress in both production scale and product variety.
Was this review help?
11
3
Share
More Forum Discussions

Why does the parking sensor keep beeping when there is nothing there?

The reasons why the parking sensor keeps beeping when there is nothing there are: 1. The sensor hole is too small, too tight, or installed on an iron or hard protective bumper; 2. There are attachments such as paint, snow, or ice on the sensor surface; 3. Poor sensor characteristics or excessively low working environment temperature; 4. Sensor malfunction. The solutions for a continuously beeping parking sensor are: 1. Wipe the parking sensor; 2. Check the parking sensor alarm end for any abnormal wiring; 3. Replace faulty or damaged components. The parking sensor is a safety auxiliary device for parking or reversing a car. It can inform the driver of the surrounding obstacles through sound or a more intuitive display, eliminating the troubles caused by the driver's need to look around when parking, reversing, or starting the vehicle, and helping the driver overcome blind spots and unclear vision.
11
0
Share

What is the correct way to downshift from 4th to 3rd gear?

The correct way to downshift from 4th to 3rd gear is: When in 4th gear, the vehicle speed is generally between 40 to 60 km/h. At this point, you can lightly apply the brakes to reduce the speed to 30 to 40 km/h. If the speed is too low, appropriately press the accelerator to compensate. Then, fully depress the clutch, shift the gear into 3rd, and gradually release the clutch until it is completely disengaged. Always remember the principle of "accelerate before upshifting, decelerate before downshifting" when shifting gears. Gear changes should be timely, correct, smooth, and swift. Upshifting should not skip gears, but downshifting can. If you accidentally select the wrong gear or cannot engage the gear, don't panic; simply return to the original gear and try again.
6
3
Share

How to use the automatic transmission DS together?

To use the automatic transmission DS together, simply switch between them directly. The DS gears are placed together for the convenience of the driver during vehicle operation. The D gear is the forward drive mode, while the S gear is the sport mode. Normally, the D gear is used for regular driving, and the S gear is engaged when experiencing sporty sensations like instant acceleration - simply switch directly between them. Automatic transmissions eliminate the need for manual gear shifting by the driver, as the vehicle automatically selects the appropriate gear based on driving speed and traffic conditions. Typical automatic transmission vehicles have six gear positions arranged from top to bottom: P, R, N, D, S, L.
3
1
Share

What Causes the Squeaking Noise of Brake Pads on Rainy Days?

On rainy days, the squeaking noise from brake pads is caused by fine sand carried by rainwater adhering to the brake discs. After rain, the brake discs may rust and develop tiny particles. Brake pads come in hard and soft varieties—hard pads are more wear-resistant, but if there are small particles between the hard pads and the gray cast iron brake discs, they can produce a sharp squeaking noise. Pressing the brakes a few times to wear off these particles usually resolves the issue. Brake pads are critical safety components in a car's braking system, consisting of a steel plate, an adhesive heat-insulating layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by checking the temperature distribution during coating.
5
4
Share

Is the Haval H6 a joint venture car or a domestic car?

Haval H6 is a domestic car. Haval is a sub-brand under Great Wall Motors, primarily focusing on SUV models. It operates in parallel with the Great Wall brand, utilizing an independent logo and possessing its own product development, production, and service systems. The brand includes three series: H series, M series, and F series. Taking the 2021 Haval H6 Guochao Edition 1.5T Automatic Urban Edition as an example: The manufacturer of this car is Great Wall Motors, classified as a compact SUV, with a turbocharged intake form. The car's dimensions are 4645mm in length, 1860mm in width, and 1720mm in height, with a wheelbase of 2680mm. The body type is a 5-door, 5-seat SUV, equipped with a 7-speed dual-clutch transmission, front-wheel drive, and electric power steering.
14
1
Share

What is the fuel tank capacity of the 2015 Jetta?

The fuel tank capacity of the 2015 Jetta is 55 liters, as officially announced. Owners of the 2015 Jetta can also check this information on the vehicle's configuration sheet. The 2015 Jetta uses 92-octane gasoline, with a fuel consumption of 5.8-5.9L per 100 kilometers. A full tank can cover a distance of 948-932 kilometers. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the car. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments, and it is advisable to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety limit, and there is additional space from the safety limit to the tank opening. This space ensures that the fuel can expand when the temperature rises without overflowing. If the fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked tank capacity.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.