What is the highway fuel consumption of the Mondeo?

2 Answers
OTravis
09/04/25 7:01am
The Ford Mondeo has a fuel consumption of around 8-9 liters per 100 kilometers. The actual fuel consumption depends on road conditions and driving habits. This car is relatively fuel-efficient and has excellent engine performance. 1. Introduction to the Mondeo The Ford Mondeo is a mid-size sedan sold by Ford Motor Company in multiple markets worldwide. The name "Mondeo" is derived from the French word "Monde," which depicts elegance and symbolizes classic and noble qualities. 2. Precautions: If the fuel consumption is abnormally high, it is advisable to visit a repair shop promptly for maintenance. The engine, cylinders, and pistons should be checked to identify the specific cause.
Was this review help?
14
1
Share
DelMalachi
09/16/25 7:53am
After driving a Mondeo for two years, I find its fuel efficiency on highways quite impressive, averaging around 7 liters per 100 kilometers. Last week, I took a trip from Beijing to Shanghai, maintaining a steady cruise speed of 120 km/h with medium air conditioning, and the fuel consumption showed 6.9 liters per 100 km. Of course, fuel consumption largely depends on driving habits—smooth acceleration and minimal hard braking can bring it down to 6.5 liters, but if the speed consistently exceeds 130 km/h or involves frequent hard braking, it might jump to 8 liters. Additionally, the 2.0T engine is more stable than the 1.5T, and checking tire pressure and engine oil during maintenance can also help. Overall, the Mondeo is quite reliable on highways, and driving normally shouldn’t pose any issues.
Was this review help?
1
0
Share
Expand All
More Forum Discussions

How often should the transmission fluid in a Lincoln MKC be changed?

Under normal driving conditions, the transmission fluid should be changed every 2 years or 60,000 kilometers. For specific details, please refer to the vehicle's maintenance manual. If the transmission fluid is not changed for an extended period, its lubricating effectiveness will diminish, leading to inadequate lubrication. This can affect the operation of the hydraulic system and cause unstable pressure in the car's transmission. Below is an introduction to the methods for changing transmission fluid: 1. Gravity Drain: This method works on the same principle as changing engine oil. Loosen the bolt on the oil pan and allow the transmission fluid to drain out under gravity. While simple, this method does not completely remove all the old fluid, as residual fluid may remain in recesses and dead corners. 2. Machine Flush: New transmission fluid is stored in a flushing machine, which is connected to the transmission via pipes. The new fluid pushes out the old fluid under the action of the machine. This method cleans the fluid passages more thoroughly. The more new fluid used, the cleaner the system becomes. A machine flush typically requires about 12 liters or more of new transmission fluid, making it more expensive. The process also takes longer, usually around an hour. 3. Oil Pan Removal: This method cleans the system from the root, ensuring a more thorough cleaning. Additionally, the transmission fluid filter can be cleaned during this process.
15
1
Share

What is the audio system in the Audi S4?

Audi officially labels the audio system in the Audi S4 as the Audi Sound System. Audi Sound System Configuration: It generally uses Bang & Olufsen and BOSE audio systems. The mid-to-low trim models are equipped with BOSE audio systems, while the higher-end models feature Bang & Olufsen audio systems. Main Components of a Car Audio System: Head unit, amplifier, and speakers. To evaluate the quality of an audio system, pay attention to the performance of these three components, with the most direct method being to examine their technical specifications. Output Power: The head unit's power should ideally be between 40W and 60W. Frequency Response: The human ear can hear frequencies ranging from 20Hz to 20KHz. Signal-to-Noise Ratio (SNR): This refers to the ratio of the music signal to noise. High-end car audio systems typically have an SNR of 90dB or higher, and the higher this value, the better. Total Harmonic Distortion (THD): This metric reflects the fidelity of sound reproduction. A lower value indicates higher fidelity and better audio performance.
11
1
Share

Where is the headphone jack on the Geely Vision?

The Geely Vision does not have a headphone jack. You can only connect your phone to the car's system via Bluetooth or use a USB flash drive connected to the USB port. Location of the USB port on the Geely Vision: The Geely Vision has one USB port on each side below the center control screen. These are vehicle transmission cables with advantages such as fast transmission speed, ease of use, support for hot swapping, flexible connection, and independent power supply. They are generally universal interfaces for USB devices like flash drives and MP3 players. Reasons why the car USB may not read the flash drive: Loose flash drive: Since the flash drive is plugged into the vehicle's USB port for extended periods during use, the vibration and shaking of the vehicle while driving can easily cause it to become loose. Damaged flash drive: Due to the less-than-ideal environment inside the car (especially during high temperatures in summer), there is a possibility of damage. Damaged USB port: If none of the above issues are present, the possibility of a damaged USB port cannot be ruled out.
20
2
Share

Where is the cruise control on the Haval H7?

The cruise control for the Haval H7 is located on the steering wheel. The cruise control is usually positioned near the steering wheel and comes in three main types: lever-style, steering wheel button-style, and steering wheel control group-style. How to use the cruise control on the Haval H7: Press CRUISE to activate cruise control. Briefly press the adjustment button toward RES+ or SET- once to increase or decrease the set cruise speed by 1 km/h. Press the button briefly toward SET- to set the current speed as the cruise speed. The main functions of the cruise control include: "SET" (set speed), "— or COAST" (reduce set speed), "RES" (resume set speed), "+ or ACCEL" (increase speed), "CANCEL" (cancel or deactivate set speed), and "ON/OFF or CRUISE" (cruise control master switch). How to activate cruise control on the Haval H7: Press the control switch to put the cruise control on standby, accelerate to the desired speed, and then push the control lever downward to set the cruise speed. To accelerate, push the control lever upward or press the accelerator. To cancel cruise control, pull the control lever upward, turn off the cruise control master switch, press the accelerator pedal, or lightly tap the brake.
19
1
Share

Can a Car with a Mortgage Be Transferred?

A mortgaged car cannot be transferred. If a car has been mortgaged, it means the ownership rights of the car temporarily do not belong to the owner. Therefore, the owner does not have the right to transfer the car, which is not temporarily theirs, to someone else. The mortgage must be fully repaid, and the mortgage must be lifted to confirm ownership before the transfer can be processed. Below is relevant information about choosing a mortgaged car: 1. Source of the Mortgaged Car: First, ensure the mortgaged car comes from a legal and legitimate source, as this is fundamental to protecting your interests. If the car is stolen or otherwise illegal, it could cause significant financial loss. 2. Documentation of the Mortgaged Car: This includes the car's age, vehicle registration certificate, etc. Additionally, the seller should provide copies of the owner's ID and other relevant documents. The buyer should verify these documents to ensure their authenticity, which can greatly reduce risks. 3. Type of Mortgage: It is important to distinguish whether the car is mortgaged through a bank installment loan or to a lending institution, as the two methods differ. If the owner sells the car before repaying the bank loan, do not purchase it, because if they fail to make timely repayments, the bank has the right to apply for the car to be auctioned, causing significant financial loss to the buyer.
16
2
Share

What Causes the Audi A6 C6 to Shake When Accelerating to 3000 RPM?

Audi A6 shaking when accelerating to 3000 RPM can be attributed to the following reasons: Damaged Spark Plugs: The most common issue causing shaking during acceleration is damaged spark plugs. Worn electrode gaps in spark plugs can lead to insufficient ignition, resulting in incomplete combustion of the air-fuel mixture and causing shaking during acceleration. Additionally, cracks in the ceramic part of the spark plug can prevent it from firing, causing one cylinder to stop working, which also leads to shaking during acceleration. Poor Fuel Quality: Low-quality gasoline can result in poor atomization by the fuel injectors, leading to incomplete combustion of the air-fuel mixture in the cylinders and causing shaking during acceleration. It is recommended to use higher-grade gasoline after finishing the current tank and perform a fuel system cleaning. Excessive Carbon Buildup: A dirty throttle body or excessive carbon buildup in the fuel injectors can cause the throttle to not close properly or the idle control motor to stick, both of which can result in high engine idle. Carbon deposits generated during engine operation can also cause vehicle shaking, especially when starting the engine, where it may shake more than usual or even fail to start on the first try. Therefore, when experiencing shaking, the throttle body and fuel injectors should be inspected first. If they are found to be dirty or have excessive carbon buildup, they should be cleaned promptly.
13
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.