What is the highway fuel consumption of the BMW 325?

1 Answers
Miles
07/30/25 9:46am
The BMW 325 has a highway fuel consumption of 8.3 liters per 100 kilometers. Fuel consumption is not only related to the car itself but also depends on the driver's habits and road conditions. Here is additional information about the BMW 325: 1. The BMW 325 is equipped with a medium-power 2.0-liter turbocharged engine, which has a maximum power output of 135 kW and a maximum torque of 300 Nm. The engine reaches its maximum power at 5,000 to 6,000 rpm and its maximum torque at 1,350 to 4,000 rpm. This engine features direct fuel injection technology and uses an aluminum alloy cylinder head and block. It is paired with an 8-speed automatic transmission (8AT). 2. The BMW 3 Series also includes models with a high-power 2.0-liter turbocharged engine, which delivers 258 horsepower and a maximum torque of 400 Nm. This engine is also matched with an 8AT transmission from ZF. The new BMW 3 Series features a double-joint independent front suspension and a multi-link independent rear suspension.
Was this review help?
12
4
Share
More Forum Discussions

Does Washing the Car with a Rag Damage the Paint?

Washing the car with a rag does not damage the paint. Here is an introduction to car paint maintenance: Be Alert to Minor Scratches: Rust often appears on the surface of car paint. In addition to common collisions and scratches, small stones kicked up by tires while driving can also cause small chips in the paint, which may develop into small rust spots over time. These minor damages are often overlooked because they usually occur in inconspicuous areas. Regularly inspect the car body, engine hood, and surrounding areas. If any damage is found, promptly take it to a professional detailing shop for treatment. Check Moisture in Areas Prone to Water Accumulation: While driving, encountering rainy or snowy weather or passing through muddy and waterlogged roads is inevitable. Sludge can easily accumulate in gaps such as the underside of the car body and the floor inside the car. If the owner does not clean it in time, moisture can hide in these areas. Regularly inspect areas such as the inner and outer edges of the wheel hubs, doors, bottom corners of the trunk, keyholes, and moving parts of the wiper frame.
3
4
Share

Should You Shift to Neutral (N) When Parking a New Energy Vehicle?

When parking a new energy vehicle, you should not shift to neutral (N). The function and precautions for using the N gear are as follows: Function of Neutral Gear: For manual transmissions, the neutral gear means the gears on the input shaft of the transmission are free-spinning and cannot bear the load or transmit power. For automatic transmissions, it means the gear system's degrees of freedom are not restricted, so it also cannot transmit power. In terms of the power transmission path, the engine's power reaches the transmission, but since there is no gear ratio inside the transmission, the power is interrupted, and the vehicle cannot move. Precautions for Using Neutral Gear: Automatic transmission vehicles should not coast in neutral under non-special circumstances, as it is unsafe and may cause the transmission to overheat due to insufficient lubrication from the oil pump. Additionally, the neutral gear does not have a braking mechanism, so you must use the handbrake or brake pedal to park the vehicle; otherwise, it may roll on uneven surfaces.
1
0
Share

What are the procedures after a one-time deduction of 12 points from the driver's license?

The procedures after a one-time deduction of 12 points from the driver's license include the following 3 steps: 1. Accept the penalty: The driver involved must go to the traffic police station within 15 days to accept the penalty. If they fail to do so within 15 days, the traffic police station will publish a notice online and directly revoke the driver's license; 2. Complete the learning procedure: The driver involved must take the study voucher issued by the traffic police station to the local vehicle management office to complete the learning procedure. After paying the fee, they must study for 7 consecutive days and then take the theoretical test for Subject 1 at the designated driving school by the vehicle management office; 3. Clearance after passing: After passing the test, the driver can take the passing notice to the traffic police station to retrieve their driver's license. The deducted points will be cleared, and the driver can resume driving. If the driver accumulates 12 points twice within one year (i.e., more than 24 points), they will need to complete the learning process and pass both Subject 1 and Subject 3 tests before retrieving their driver's license.
1
2
Share

How to Handle an Overdue Driver's License Annual Review?

If the driver's license has been overdue for less than 12 months, it can be processed as usual. More relevant information is as follows: 1. Over one year but less than 3 years: You need to retake the subject one exam for license renewal, and you can obtain the driver's license after passing the exam; 2. Overdue for more than three years: You need to reapply for the driver's license test. Driving is prohibited during the overdue period, otherwise it will be treated as driving without a license; 3. Expired for more than three years: The driver's license will be invalidated and canceled, and you need to retake the driver's license test. Below are the materials required for the annual review: 1. Introduction: Vehicle annual review, also known as annual inspection, is a mandatory inspection for every vehicle (motor vehicle) that has obtained an official license plate and registration certificate. It is similar to an annual safety check for vehicles based on the technical conditions for safe operation of motor vehicles. 2. Purpose: To promptly eliminate potential safety hazards of the vehicle, urge and strengthen vehicle maintenance, and reduce the occurrence of traffic accidents.
5
1
Share

How to Adjust the Air Conditioner Thermostat in a Truck?

The air conditioner thermostat has two symbols: a plus sign and a minus sign. The plus sign increases the temperature, while the minus sign decreases it. Adjusting the temperature is as simple as using these buttons. More information about the air conditioner thermostat is provided below: 1. Introduction: The air conditioner thermostat controls and sends signals to actuators through programmed settings, thereby regulating the air conditioner's fan bypass and electric two-way valve. It is a switch device designed to control the temperature of an air-conditioned room, typically maintaining a range between 18°C and 28°C. Window-type air conditioners commonly use a pressure-based temperature controller to toggle the contacts on and off. Its structure consists of a bellows, a temperature-sensing bulb (test tube), an eccentric wheel, a microswitch, and other components forming a sealed sensing system and a signal transmission system. 2. Function: The air conditioner thermostat ensures the normal and multifunctional operation of the air conditioner while protecting the compressor and fan motor. The circuit system includes components such as the temperature controller, thermal protector, main control switch, running capacitor, and fan motor capacitor, all housed in a control box. The electrical circuit diagram of a cooling-only air conditioner shows that the temperature controller's role is solely to control the compressor's start and stop.
4
3
Share

Which is higher, B1 or B2 driver's license?

b1 and b2 driver's licenses are not ranked in terms of level; they differ in the types of vehicles they permit. The specific differences between the two are as follows: 1. b1: The B1 license allows driving medium-sized passenger vehicles, defined as those not exceeding 6 meters in length, with a certified passenger capacity of 10 (inclusive) to 19 (inclusive) people. Other permitted vehicle types include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery). 2. b2: The B2 license permits driving heavy and medium-sized trucks or large, heavy, and medium-sized specialized operation vehicles. Heavy and medium-sized trucks are mainly trucks, such as the large dump trucks commonly seen on roads carrying construction debris, which fall under the category of heavy trucks. Large, heavy, and medium-sized specialized operation vehicles refer to vehicles equipped with special devices or tools, such as water sprinklers, concrete mixers, fire trucks, etc. Other permitted vehicle types for B2 license include C1 (small cars), C2 (small automatic transmission cars), C3 (low-speed trucks), C4 (three-wheeled cars), and M (wheeled self-propelled machinery).
12
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.