What is the Highlander?

Does the Focus have an engine guard?

Ford Focus comes with a resin engine guard as standard equipment from the factory. While it offers limited protection, it is sufficient for daily urban road use. If owners are concerned or frequently drive on rural dirt roads, they can upgrade to stainless steel or aluminum alloy guards for enhanced protection. The engine guard primarily protects the engine and transmission. There are pros and cons to installation: while it provides better protection for the engine and transmission, it may interfere with the engine's protective downward displacement during severe frontal collisions. This issue mainly depends on the driving conditions most frequently encountered.

19

1

Share

What Causes Car Brake Noise?

The reason for car brake noise is a problem in the brake system. Worn brake pads become very thin, causing the brake drum to directly contact the vehicle, resulting in noise from metal friction. If the brake pads are too thin, a warning indicator light should illuminate. If the wear hasn't reached the set limit, the light may sometimes not come on. If the brake pads are found to be fine upon inspection, the car can be driven normally. If the car is new, because both the brake pads and brake discs are brand new, they are in the break-in period, which can cause unusual noises while driving. If the noise is due to this reason, the owner need not worry, as the noise will automatically disappear after the car completes the break-in period.

6

4

Share

How to Drive a New Energy Vehicle?

Steps to drive a new energy vehicle: 1. Fasten your seatbelt before starting, press the brake and release the handbrake, then press the car start button to change its color to green and light up the dashboard; 2. Check the surrounding environment, and after confirming safety, shift the gear from N to D; 3. Slowly release the brake to start the car, then press the accelerator to drive normally. When parking, it is important to first press the brake, then shift the gear to N (neutral), pull up the handbrake, turn off the engine and wait for the start button to dim, and finally lock the car when getting off. The core power of new energy vehicle models consists only of the motor and battery, with a relatively simple structure and low technical barriers, so there are relatively more models available and they are easier to drive.

16

5

Share

What should you do when driving in waterlogged sections while following another vehicle?

When driving in waterlogged sections while following another vehicle, you should appropriately increase the following distance to maintain a safe gap, slow down or stop in advance to observe the conditions, turn on the windshield wipers beforehand, enter the water slowly while maintaining steady throttle, and drive at a constant speed in a low gear. When driving on waterlogged roads, the vehicle should first ensure stable and sufficient power to keep the exhaust pipe filled with pressurized gas, preventing water from backing into the exhaust pipe and causing the engine to stall. During the drive, avoid stopping midway, shifting gears, or making sudden turns of the steering wheel. If the driver is unsure about the road conditions, it is best to wait for other vehicles with higher ground clearance to pass first, observe how they navigate the waterlogged section, and then follow their path for safer passage. Avoid having multiple vehicles enter the water in succession, as a malfunction in the leading vehicle could affect the normal operation of the following ones.

14

4

Share

What engines are equipped in Lynk & Co vehicles?

Lynk & Co models are equipped with two types of engines: one is a 1.5-liter three-cylinder turbocharged engine, and the other is a 2.0-liter turbocharged four-cylinder engine. Lynk & Co is a premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Car Group in the new era. Lynk & Co vehicles are built on platforms co-developed by Geely and Volvo, and they incorporate many of Volvo's technologies. The Lynk & Co 03 is a compact sedan under the Lynk & Co brand, with a wheelbase of 2730 mm and dimensions of 4639 mm in length, 1840 mm in width, and 1460 mm in height. There is also a high-performance version of the Lynk & Co 03, which is equipped with a more powerful 2.0-liter turbocharged engine.

11

1

Share

Can You Still Drive with a Punctured Tire?

Whether you can still drive with a punctured tire depends on the location of the puncture. If the puncture is on the tread, the tire can still be driven after being repaired. However, if the puncture is on the sidewall, it is not safe to drive even after repair. The sidewall is the thinner and more fragile part of the tire, and damage to it poses a potential risk of a blowout, so it is recommended to replace the tire directly. If the tire is punctured but not leaking air, the owner should not remove the foreign object directly, as doing so may cause air leakage, making the car undrivable. Instead, drive slowly to a repair location. If the tire is severely leaking air, do not force the drive, as this not only harms the tire but also poses a driving hazard.

19

5

Share

What is the Highlander?

Does the Focus have an engine guard?

What Causes Car Brake Noise?

How to Drive a New Energy Vehicle?

What should you do when driving in waterlogged sections while following another vehicle?

What engines are equipped in Lynk & Co vehicles?

Can You Still Drive with a Punctured Tire?

How to Restore Power to a Depleted Car Battery?

How to reset the tire pressure warning light on the Ford Edge?

What Are the Hazards of Slamming Car Doors?

What kind of engine oil should be used for the Highlander 2.0T?