What is the highest fuel consumption of the Baojun 730?

How long does it take to receive a message from the DMV after registration?

Normally, you will receive a text message from the DMV within about 7 to 10 days after registration. The time depends on how long it takes for the driving school to file your information with the DMV and the speed of the DMV's review. Below is an introduction to the driver's license application process and precautions during the probationary period. Driver's license application process: Registration. You can register at any official driving school. During registration, you will need to provide some documents, such as a copy of your ID card, a copy of your residence permit, etc. The required documents may vary slightly depending on the region. Medical examination. The purpose of the medical examination is to verify whether the applicant meets the driving requirements in terms of hearing, vision, color blindness (red-green), etc. Take the theoretical test for Subject 1, which usually covers traffic regulations and driving knowledge. Take the on-site test for Subject 2, which commonly includes reversing into a parking space, parallel parking, curve driving, etc. Take the road test for Subject 3. Take the safety and civilized driving test for Subject 4. After passing all tests, you can receive your driver's license. Precautions during the probationary period of the driver's license: The probationary period lasts for one year from the day you obtain your driver's license. During the probationary period, you are not allowed to drive on highways unless accompanied by a driver with at least 3 years of driving experience in the passenger seat. Drivers with a C1 license during the probationary period should be aware that if they accumulate 12 penalty points, their probationary driving qualification will be immediately revoked.

13

2

Share

What does it mean when the car code light is on?

"Car code indicates the need for indicator light self-check. When the self-check button is pressed, all indicator lights on the dashboard illuminate, showing that all indicator lights can normally report fault conditions. More information about Code is as follows: Introduction to the code light: The car code is a detection chip for the vehicle. If the chip cannot be detected, the dashboard light will turn on. When this light is on, the car cannot be started, and multiple attempts may lock the engine, commonly known as engine anti-theft. For vehicles equipped with an engine immobilizer system, even if a thief can open the door, they cannot drive the car away. Solutions for when the car displays code: If the car code light is flashing, it is likely a gasoline issue. Check the front and rear oxygen sensors. The initial symptoms of a faulty sensor are the engine fault light staying on or occasionally flashing on the dashboard. The car may be able to run for a short time, but prolonged neglect will prevent the electronic fuel injection system's computer from receiving information about the oxygen concentration in the exhaust pipe, making it unable to perform feedback control on the air-fuel ratio. This will increase engine fuel consumption and exhaust pollution. Therefore, it is essential to address the fault or replace the sensor promptly."

20

5

Share

What are the symptoms of a faulty transmission in the Tiida?

Tiida transmission failure symptoms include the dashboard warning light illuminating during normal driving, jerking, impact sensations, failure to shift up, and abnormal noises. To identify the root cause of Tiida transmission issues, it is essential to adopt a correct diagnostic approach and refer to necessary data rather than blindly replacing components. A major cause of transmission failure is contamination of the valve body. A dirty transmission valve body can degrade the quality and frictional properties of transmission fluid, increasing friction and wear. Additionally, sludge buildup within the transmission can clog the valve body and pipelines, disrupting proper oil pressure regulation and leading to transmission malfunctions. Furthermore, when driving through water, moisture infiltration through seals or vent holes can also cause transmission failure, necessitating disassembly and thorough cleaning of all transmission components. Poor vehicle maintenance and corrosion of the radiator by substandard coolant may likewise result in transmission issues. It is advisable to repair or replace damaged parts and change the coolant. During vehicle operation, if the gear indicator light illuminates on the dashboard or the information display shows a transmission fault warning accompanied by shifting impacts, this indicates a transmission malfunction. The system will enter emergency mode, requiring inspection and repair.

8

0

Share

Should the vehicle on the right have the right of way at a T-junction?

Giving the right of way to the vehicle on the right refers to the situation where there are no traffic lights, no traffic signs (such as yield signs), and no traffic police directing traffic. In such cases, the rule of 'yielding to vehicles going straight' should be followed first. Below are the relevant details: When passing through an intersection without traffic lights or traffic control, and there are no traffic signs, and both vehicles are going straight, the rule of 'yielding to the vehicle on the right' must be followed. This is based on Article 52 of the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China.' For example, if Vehicle A is going straight from south to north, and Vehicle B is going straight from west to east, then before the collision, Vehicle A is on the right side of Vehicle B. In this case, Vehicle B must yield to Vehicle A. It is important to emphasize that Vehicle B can only enter the intersection after ensuring that Vehicle A has passed smoothly, completely, and safely. Remember, it's about entering the intersection. Otherwise, it is Vehicle B's responsibility, regardless of where the collision occurs—even if it's at the very rear of Vehicle A. Even if Vehicle A hits Vehicle B, it is still Vehicle B's responsibility. This is the rule of 'yielding to the vehicle on the right.' When two vehicles are turning into the middle lane simultaneously and an accident occurs, the same principle applies. First, it must be confirmed that there are no traffic lights, no traffic control, and no traffic signs. Before the accident, if Vehicle B is on the right side of Vehicle A, then when both vehicles are turning into the middle lane simultaneously and an accident occurs, it is Vehicle A's responsibility. When two vehicles are turning simultaneously and both are making a left turn, resulting in a collision, the same conditions apply. There must be no traffic lights, no traffic control, and no traffic signs at the intersection. Before the accident, if Vehicle B is on the right side of Vehicle A, then when both vehicles are turning simultaneously and an accident occurs, it is Vehicle A's responsibility. It should be noted that such scenarios are not explicitly mentioned in the 'Road Traffic Safety Law of the People's Republic of China' or its 'Implementation Regulations,' but some provincial 'Implementation Regulations' have clear stipulations on this matter.

11

5

Share

Why is No Ethanol Added to 95 Octane Gasoline?

"The cost of ethanol-blended gasoline continues to rise, and gas stations are facing increasing sales pressure, so 95 octane gasoline has temporarily stopped adding ethanol. Compared with traditional gasoline, the biggest advantage of ethanol-blended gasoline is that it can effectively reduce the emission of pollutants in vehicle exhaust. However, the selling price of ethanol is not much different from that of ordinary gasoline, but with the recent rise in the price of raw materials such as corn, the cost of ethanol has increased. Precautions for using ethanol-blended gasoline: Ethanol is a hydrophilic liquid and easily dissolves in water, unlike gasoline, which can separate from water, with water settling at the bottom of the fuel tank. Therefore, when using ethanol-blended gasoline for the first time, the fuel tank should be checked to see if the water content exceeds the standard and affects the engine's operation. When first using ethanol-blended gasoline, carefully observe and adjust the engine to see if there are any significant abnormalities; for long-term use, consider whether the rubber and organic components in the fuel supply system are resistant to alcohol corrosion. Advantages and disadvantages of ethanol-blended gasoline: Advantages: Energy-saving, environmentally friendly, and low-cost; ethanol-blended gasoline is a mixture of ordinary gasoline and 10% fuel ethanol. It is a renewable resource processed from grains and various plant fibers. Using ethanol-blended gasoline can not only diversify the energy structure and ensure energy security but also replace some petroleum, reducing dependence on foreign oil. In addition, it has a cleaning effect, removing carbon deposits from the engine. Exhaust emissions are relatively lower, which can help improve air pollution to some extent. Disadvantages: Ethanol burns slower than gasoline, which can lead to reduced vehicle power, poor acceleration performance, and increased fuel consumption. Secondly, ethanol is easily soluble in water. When the water content in ethanol-blended gasoline exceeds the standard, phase separation is likely to occur, and long-term parking of the vehicle can cause fuel stratification, making it difficult to start the vehicle. Moreover, due to the high oxygen content in ethanol-blended gasoline, prolonged use can corrode the exhaust pipe."

17

1

Share

What Are the Reasons for High Water Temperature in a Van?

The main reasons why the water temperature in a van tends to be too high include insufficient water in the car's radiator, a malfunctioning thermostat, or water pipe leakage. When the car's radiator lacks water, it is necessary to replenish the water promptly to ensure sufficient water levels in the radiator, which helps in cooling the vehicle's water temperature. The car radiator, also known as a heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat—coolant absorbs heat in the water jacket, flows to the radiator to release the heat, and then returns to the water jacket in a continuous cycle, achieving the effect of heat dissipation and temperature regulation. If the car's thermostat malfunctions, check whether it is due to the valve opening or the temperature for full opening being too high. In this case, the valve should be tightly closed. The car thermostat controls the flow path of the engine coolant and automatically adjusts the amount of water entering the radiator based on the coolant temperature, thereby conserving energy. If the car's water pipe leaks, replace the anti-slip strip, clear the drainage hole, and close the radiator cap. If inspection reveals a cracked heat pipe or water pipe, promptly take the vehicle to a repair shop for maintenance. Precautions: While driving, slow down and pull over to the roadside. Do not turn off the engine directly, and avoid pouring cold water on the engine during cooling.

1

3

Share

What is the highest fuel consumption of the Baojun 730?

How long does it take to receive a message from the DMV after registration?

What does it mean when the car code light is on?

What are the symptoms of a faulty transmission in the Tiida?

Should the vehicle on the right have the right of way at a T-junction?

Why is No Ethanol Added to 95 Octane Gasoline?

What Are the Reasons for High Water Temperature in a Van?

Can I apply for ETC for a new car without canceling the old car's ETC?

Was Turbo Technology Invented by Japan?

What are the symptoms of a slightly blown head gasket?

Where to Clean When There's an Odor in the Car Air Conditioning?