What is the high beam bulb model for the 2006 Odyssey?

1 Answers
NadiaDella
07/25/25 7:46am
The high beam bulb model for the 2006 Odyssey is H1. This vehicle is equipped with a 2.4L L4 engine featuring natural aspiration, delivering a maximum horsepower of 170ps and peak torque of 220nm. The car measures 4770mm in length, 1800mm in width, and 1582mm in height, with a wheelbase of 2830mm. It's configured as a 5-door, 7-seat MPV with a 5-speed automatic transmission, capable of reaching a top speed of 190km/h. The drivetrain is front-wheel drive, featuring double-wishbone independent suspension at both front and rear. The steering system uses mechanical hydraulic power assist, and the body structure is of unibody design.
Was this review help?
11
3
Share
More Forum Discussions

What car is represented by two Rs?

The brand using the double R emblem is the British luxury car manufacturer Rolls-Royce. The Rolls-Royce double R logo stands for the initials of its two founders, Charles Stewart Rolls and Henry Royce. Detailed information about Rolls-Royce models is as follows: There are currently five models available for sale. The first model is the Rolls-Royce Phantom, the second is the Rolls-Royce Ghost, the third is the Rolls-Royce Cullinan, the fourth is the Rolls-Royce Wraith, and the fifth is the Rolls-Royce Dawn. These vehicles are categorized as full-size luxury car, full-size luxury car, full-size luxury SUV, sports car, and sports car respectively.
12
2
Share

What are the main components of an electronically controlled fuel injection system?

An electronically controlled fuel injection system consists of the following three subsystems: the fuel supply system, the air intake system, and the electronic control system. 1. The fuel supply system is composed of a fuel tank, fuel pump, fuel filter, pressure regulator, pulsation damper, fuel injectors, fuel supply lines, and return lines. 2. The air intake system includes an air cleaner, throttle valve, air flow meter, intake chamber, idle speed control valve, and intake control valve. The function of the fuel supply system and air intake system is to mix the fuel injection quantity and air intake quantity determined by the ECM/ECU based on the throttle position (engine load) and engine speed to form a combustible mixture, which then enters the cylinders for combustion and power generation. 3. The electronic control system consists of several sensors that detect various engine conditions, an ECU that determines the fuel injection quantity based on sensor signals, and fuel injectors that operate according to ECU commands. Its main function is to determine the optimal fuel injection timing and injection duration according to different engine operating conditions.
13
0
Share

What type of engine oil is suitable for the Honda New City?

Honda City uses semi-synthetic engine oil with the specification SM grade 5W30. Engine oil, also known as engine lubricant, serves functions such as lubrication and wear reduction, auxiliary cooling, sealing to prevent leaks, rust and corrosion prevention, as well as shock absorption for the engine. Below are relevant details about the Honda City: The Honda City has a body size of 4450mm in length, 1695mm in width, and 1477mm in height, with a wheelbase of 2600mm. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum power of 96 kW at 6600 rpm and a maximum torque of 155 Nm at 4600 rpm, paired with a 5-speed manual transmission.
6
5
Share

What Causes the Inability to Accelerate When Pressing the Gas Pedal?

There are typically several reasons why a car's gas pedal fails to accelerate: 1. Engine carbon buildup issue. Excessive carbon buildup in the engine. As the car is used, the engine may accumulate sludge or other contaminants due to incomplete combustion, which can adhere to components and cause the engine to stall during operation. 2. Poor driving conditions. Adverse road conditions can hinder the smooth operation of various car components. Apart from internal parts, the inability to accelerate may also be related to driving conditions, such as frequent acceleration and deceleration in congested traffic, which can prevent car components from rotating promptly, leading to sluggish acceleration and weak starting. 3. Poor fuel quality. Low-quality fuel results in insufficient power generation during combustion. If the fuel quality is subpar, it can affect the car's fuel system and gasoline filter. Excessive impurities in the fuel can cause blockages, leading to poor fuel supply, preventing the engine from operating normally, and resulting in weak acceleration.
7
4
Share

What Are the Reasons for Car Air Conditioning Not Cooling?

There are many reasons why car air conditioning may not cool properly. Below is an introduction to the common causes of car air conditioning not cooling: 1. Insufficient or too little refrigerant. A common reason for car air conditioning not cooling is insufficient or too little refrigerant, which is likely caused by minor leaks. 2. Excessive refrigerant. The proportion of refrigerant in the air conditioning system must meet specific requirements. If the proportion is too high, it can affect heat dissipation. Similarly, adding too much cooling oil during maintenance can also reduce the heat dissipation of the refrigeration system. 3. Loose drive belt of the car air conditioning compressor. Car cooling relies on refrigerant, and refrigerant transmission depends on the air conditioning compressor. The drive belt is a crucial moving part that drives the compressor. If the belt is loose, the compressor may slip during operation, leading to reduced transmission efficiency, lower compressor speed, and decreased refrigerant delivery, resulting in the air conditioning not cooling. 4. Substandard refrigerant or frozen oil. Excessive impurities in the refrigerant or frozen oil can clog the car air conditioning filter, causing the air conditioning to stop cooling. This increases resistance and reduces the flow of refrigerant to the expansion valve, leading to insufficient cooling capacity. 5. Moisture infiltration in the refrigeration system. If moisture enters the car air conditioning refrigeration system, causing insufficient or no cooling, the desiccant or dryer in the car air conditioning system should be replaced. At the same time, the system should be evacuated and refilled with an appropriate amount of new refrigerant.
5
5
Share

What to Do When There Are Water Droplets Inside the Headlights?

Most of the time, it is caused by moisture inside the car headlights, or it could be due to poor sealing of the headlights, allowing water to enter during rain or when driving through water. The specific solutions are as follows: 1. In the first case, you can use compressed air to blow out the fog inside, or open the rear cover of the headlight on a very sunny day to let it dry naturally. The former method saves time and works quickly, while the latter requires waiting. 2. The solution for the latter case is the same as the former—you can either air-dry or blow-dry it. However, it is crucial not to directly heat the headlight, as this could easily damage it. After drying, check if there are any small holes on the headlight, which may be the source of the water leakage, and repair them promptly.
12
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.