···
Log in / Register

What is the hfc4gb2.4e engine?

3 Answers
DeEmilio
07/29/25 6:50am
hfc4gb2.4e is a turbocharged engine. Principle of turbocharging: A turbocharged engine is an engine that relies on a turbocharger to increase the intake air volume. The turbocharger is essentially an air compressor. It uses the exhaust gases from the engine as power to drive the turbine in the turbine chamber, which in turn drives the coaxial impeller. The impeller compresses the fresh air delivered through the air filter pipe and then sends it into the cylinder. When the engine speed increases, the exhaust gas discharge speed and turbine speed also increase synchronously, thereby enhancing the air compression level. This correspondingly increases the engine's intake air volume, which in turn boosts the engine's output power. Function of turbocharging: The main function of turbocharging is to increase the engine's intake air volume, thereby enhancing the engine's power and torque, making the vehicle more powerful.
Was this review help?
4
3
Share
ManuelLee
08/12/25 10:57pm
The HFC4GB2.4E is a 2.4-liter gasoline engine produced by JAC Motors, featuring an inline four-cylinder design with a peak power output of around 130 horsepower. It is equipped with an electronic fuel injection system, which enhances responsiveness and fuel efficiency, while its compact structure makes maintenance easy. Commonly found in mid-to-low-end SUV models like the JAC Refine and Heyue, it delivers smooth power output suitable for urban driving and rural roads. Compared to older models, it features optimized combustion chambers for reduced emissions and can be fitted with fuel-saving devices. I appreciate this reliable engine for its simple maintenance and affordable parts, capable of running smoothly for seven to eight years without major issues.
Was this review help?
20
2
Share
Expand All
MacGeorge
10/04/25 4:34am
My car is equipped with the HFC4GB2.4E engine, which has been running decently for over a decade. It starts smoothly without jerking and accelerates steadily, with city fuel consumption around 8L/100km and highway driving saving up to just over 6L/100km. For daily maintenance, I just change the engine oil, air filter, and spark plugs myself—basically no major repairs needed. The engine bay layout is clear, making coolant checks convenient. It starts a bit slower in winter but runs smoothly after warming up. For new drivers using this car, I recommend using higher-grade gasoline and maintaining it more frequently to extend its lifespan—it's cost-effective and economical.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

Where is the anti-theft module of Toyota Corolla located?

Behind the evaporator box. Below is a detailed introduction to the car anti-theft system: 1. Anti-theft authentication: For vehicles with a keyless system, pressing the unlock button or the keyless button on the driver's side door handle will unlock the doors and deactivate the vehicle's security status. When the power is switched to the ON position, the engine's anti-theft authentication is successful, and the anti-theft indicator on the dashboard will turn off. 2. Automatic locking: If any door, window, or ignition switch is not opened within 30 seconds after unlocking, the doors will automatically lock again, reactivating the security status. 3. Components: The system consists of an electronically controlled remote or key, electronic control circuits, alarm devices, and actuators.
7
1
Share

What is the wheel size of the Baojun 730?

The Baojun 730 comes standard with 16-inch wheels across all models. Here are the relevant details: 1. The Baojun 730 is equipped with standard 16-inch wheels, featuring common specifications and tire sizes, but offers good comfort and safety in use. For tires, the Baojun 730 flagship model is fitted with Continental tires in the size 205/55-R16. 2. The main advantages of steel wheels are their simple manufacturing process, relatively low cost, and strong resistance to metal fatigue—commonly known as being cheap and sturdy. However, steel wheels also have notable disadvantages: unattractive appearance, heavier weight (steel wheels are much heavier than aluminum alloy wheels of the same size), higher inertial resistance, poorer heat dissipation, and a tendency to rust easily.
17
1
Share

What is the difference between RT tires and AT tires?

The differences between RT tires and AT tires are as follows: 1. AT stands for all-terrain tires. 2. RT stands for rugged-terrain tires. Below is an introduction to AT tires: 1. All-terrain tires are designed to be more versatile than highway tires, with more rugged tread patterns and slightly larger gaps between tread blocks. 2. The downside of this design is reduced highway performance and increased noise, but they offer better durability and traction on unpaved surfaces compared to highway tires, making them a balanced choice for both off-road and highway use. Below is an introduction to HT tires: 1. HT tires are highway tires, featuring neutral road tread patterns. 2. They are mainly suitable for SUVs driven on highways, offering a softer sidewall and finer tread patterns.
14
0
Share

What does the HOLD button on an automatic transmission car do?

HOLD button on a car means forced gear shifting, which adjusts the optimal driving state according to different road conditions, effectively prevents frequent gear shifts on different road surfaces, and serves as a forced downshift (without upshifting) during overtaking. The HOLD function can be used in the following situations: 1. On slippery surfaces, such as when starting on snow, you can place the gear lever in position 2 and press HOLD, so the transmission will maintain the gear ratio in 2nd gear, making the start smoother. 2. When driving on mountain roads or continuous slopes, press the HOLD button in D4 or 2nd gear to enter the hold mode, which provides stronger acceleration when going uphill; and greater engine braking and safety when going downhill, also avoiding wear caused by frequent gear shifts.
20
4
Share

What is a left-turn waiting zone?

Left-turn waiting zone refers to the area where vehicles in the left-turn lane must advance when the straight-through lane in the same direction has a green light, waiting for the signal. The left-turn lane is extended with several meters of white dashed-line boxes that connect directly to the middle of the road. These white dashed boxes mark the designated left-turn waiting zone. Roads implementing left-turn waiting zones are mostly one-way roads with three or more lanes. According to each traffic signal cycle, it is estimated that 3 or 4 additional vehicles can pass per cycle, increasing traffic flow by approximately 100 vehicles per hour. This effectively enhances the intersection's vehicle throughput and reduces vehicle congestion.
17
4
Share

How to Troubleshoot When the Urea Warning Light Comes On?

Methods to troubleshoot when the urea warning light comes on: 1. If the vehicle experiences poor acceleration or white smoke from the exhaust pipe, professional equipment is needed to clean the urea crystallization inside the exhaust pipe; 2. If the vehicle's fault code indicates low urea pressure, it is necessary to replenish the urea; 3. If the engine torque is limited and the RPM cannot exceed 1800 per minute, the urea pump and sensor need to be replaced. Automotive urea is a high-purity transparent liquid with a faint ammonia odor, alkaline but non-toxic. Failure to load diesel exhaust fluid (DEF) or using impure or substandard DEF can cause the vehicle's engine to automatically reduce speed. Poor-quality DEF can contaminate the catalyst in the SCR catalytic reaction tank, leading to serious consequences.
7
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.