···
Log in / Register

What is the height requirement for Kawasaki Ninja 400?

4 Answers
StBeckett
07/29/25 12:22pm
A tester with a height of 168cm can easily place both feet on the ground. Below is the relevant introduction: Improved comfort: The seat uses a slow-rebound material and is 50% thicker to enhance comfort, while also being narrowed by 30mm for better support. The overall height of the vehicle is not high, and the lower seat height also reduces the footpeg height, preventing the legs from feeling cramped during riding. The Ninja 400 is designed with a greater emphasis on providing a good street riding experience and convenience. Body dimensions: Overall length 1990, overall width 710, overall height 1120, wheelbase 1370, seat height 785 (all in mm). Vehicle weight: 167kg.
Was this review help?
9
3
Share
Ophelia
08/13/25 11:19pm
Riding a Kawasaki Ninja 400 motorcycle with a seat height of about 31 inches (785 mm), I don't think the height requirement is set in stone—it depends on personal comfort and sense of security. At my height of 172 cm, I feel very stable riding it, with both feet firmly planted on the ground, so I don’t worry about tipping over when stopping or at low speeds. However, if you're shorter than 165 cm, you might only be able to tiptoe, which can make beginners nervous on slopes or in congested streets. I recommend trying it out at a dealership first to get a feel for the balance. Shorter riders can opt for a lower seat or adjust the suspension—just a small investment to make it work. Also, practice starting and stopping maneuvers, and always wear protective gear for peace of mind.
Was this review help?
17
2
Share
Expand All
DelJuliana
10/09/25 3:25am
When choosing the Ninja 400 as my first bike, I was concerned about my height since I'm only 160 cm tall. The seat height was a bit challenging for a shorter person like me—during the test ride, I could only touch the ground with my tiptoes, which didn't feel very stable. The dealer suggested modifying the suspension or opting for a thinner seat to lower it by 2-3 cm, so I went ahead with that, and now it rides fine. While riding, I have to be extra careful with low-speed turns and avoid sudden braking to prevent tipping over. I recommend measuring your own seat height and practicing balance in a parking lot first. If it feels too difficult, consider other models with lower seat heights—safety should always come first.
Was this review help?
20
2
Share
Expand All
Gia
11/22/25 4:41am
Height is a crucial factor for motorcycle safety. The Ninja400's seat height of 785mm requires riders to be at least 165cm tall to place both feet flat on the ground. Insufficient height can lead to instability when stopping, increasing the risk of tipping over, especially during emergency braking or on slopes. I recommend measuring your inseam before purchasing and ensuring both feet can firmly touch the ground during a test ride. A useful tip is to practice balancing on one foot or wearing thick-soled boots. Modification options like lowering the suspension are relatively low-cost, but it's better to prioritize choosing a bike that fits you properly.
Was this review help?
11
1
Share
Expand All
More Forum Discussions

What does Moli genuine leather mean?

Moli is actually a craftsmanship. Its characteristics include using imported high-grade full-grain leather blanks, processed through various leading techniques to restore the soft and comfortable natural touch. It has clearly visible pores and patterns, perfectly conforming to the human body's curves with a strong sense of premium quality. Here is additional information on the characteristics of artificial leather and synthetic leather: 1. Press the leather surface with your finger, there should be no obvious pore wrinkles. If wrinkles appear after pressing, they will not naturally disappear noticeably. 2. The leather surface has no pores, which is an important feature to distinguish between genuine and fake leather. 3. Cut a corner and burn it; there will be an odor, but not the burnt smell of hair.
18
1
Share

How Many Years Can a Wuling Rongguang Generally Last?

Currently, national regulations stipulate that non-commercial passenger vehicles with fewer than 9 seats have a scrapping period of fifteen years. Therefore, as long as the Wuling Rongguang remains in good condition, it can be driven for up to fifteen years. Below is some relevant information: 1. Exterior Design: The Wuling Rongguang EV largely follows the design style of the current fuel-powered Wuling Rongguang model. For the front fascia, the Wuling Rongguang EV features a narrow grille with honeycomb elements, complemented by large-sized headlight clusters on both sides. 2. Rear Design: The Wuling Rongguang EV adopts vertical tail light clusters. Additionally, the 'Wuling Rongguang EV' badge in the lower left corner highlights its new energy vehicle identity.
8
5
Share

Is 30 cm required for parallel parking?

Parallel parking requires a 30 cm distance to avoid point deductions. Below is relevant information about parallel parking: 1. Introduction: Parallel parking is part of the second subject in the driver's license test. Parallel parking is becoming increasingly common in urban areas, especially when parking spaces in regular parking lots are in short supply. Many places have designated parking spaces along the sides of streets, creating "parallel parking spots." 2. Precautions for parallel parking: Adjust the left and right rearview mirrors. The left rearview mirror should be lowered as much as possible to see the left rear wheel, while the right rearview mirror should allow visibility of the car body. The interior rearview mirror should be adjusted so that the middle of the rear windshield is visible when looking up.
12
1
Share

What is the explanation of gears for Hyundai automatic transmission vehicles?

Hyundai Elantra gear usage instructions: 1. P (Parking Gear): Can only be engaged when the vehicle is completely stopped. To exit this gear position, depress the brake pedal and turn on the ignition switch. 2. R (Reverse Gear): This gear is used for reversing. It can only be engaged after coming to a complete stop by depressing the brake pedal during reversing. It cannot be engaged while the vehicle is in motion. 3. N (Neutral Gear): The neutral gear is located after the reverse gear. When engaged, the vehicle's engine power cannot be transmitted, typically used for short-term parking. 4. D (Drive Gear): The automatic transmission operates automatically during driving, and the driver only needs to control acceleration and deceleration. 5. M (Manual Gear): In manual mode, the driver needs to manually increase or decrease gears, and the transmission will not intervene automatically.
20
4
Share

What to Pay Attention to When Leaving a Car in an Underground Garage for a Long Time?

Here are the precautions for leaving a car in an underground garage for a long time: 1. Pay attention to the protection of the wiper blades: Wiper blades are components that are prone to aging. They can freeze in very cold weather and stick to the glass in very hot weather, so they can be lifted up. 2. Tire protection: Tires are also prone to aging. When left stationary for a long time, the side in contact with the ground will gradually deform due to gravity, making them uneven when used. Therefore, the tire pressure should be increased to 300 kPa. If possible, lift the car to protect the tires and suspension system effectively. 3. Keep the interior clean and dry: A humid environment can cause rust on the interior components and wiring. If there is uneaten food left inside, it can mold. Also, make sure to close the windows properly, or mice may become interested in anything they can chew.
19
0
Share

What is a License Plate Quota?

License plate quota can be considered as the qualification to obtain a license plate. With an increasing number of people needing to purchase cars, the allocation of motor vehicle license plate quotas is determined through a lottery system. Those who win the lottery have obtained the quota, and only with this quota can they proceed to the vehicle management office to receive their license plates after purchasing a car. Additional information about license plates is as follows: 1. Vehicle license plates are plates hung on the front and rear of a vehicle, typically made of aluminum, plastic, or stickers, displaying the vehicle's registration number, registration region, or other basic information. License plates serve as unique identifiers for vehicles. 2. The primary function of vehicle license plates is to identify the province, city, or county to which a vehicle belongs. The vehicle management office can use the license plate to trace the owner of the vehicle.
5
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.