What is the height of the Mercedes-Benz G500?

1 Answers
LeLillian
07/30/25 7:42am
The height of the Mercedes-Benz G500 is 1963mm. Here is the relevant introduction about the Mercedes-Benz G500 car: 1. Interior space: Its interior clearly draws inspiration from the design of the previous generation of Mercedes-Benz sedans (especially resembling the W202 C-Class). The dark cabin adheres to the practical principles of an off-road vehicle. As the core of the interior, the dashboard maintains a neat and generous styling overall, consistent with the simple and rugged exterior, neither overly aggressive nor emphasizing curvaceous elegance. 2. Structure: In addition to the ladder-frame structure, the full-time four-wheel drive system replaces the previous manual transfer case. While driving at speeds below 40km/h, you can easily switch from 4H to 4L mode by pressing the high/low button behind the gearshift. At this point, the transfer case gear ratio changes from the original 0.87:1 to 2.16:1, providing increased torque sufficient to tackle steep slopes and high obstacles.
Was this review help?
6
4
Share
More Forum Discussions

What is the tire model of the 2014 Peugeot 308?

The tire models for the 2014 Peugeot 308 are: 215/55/16 and 205/55/16. The tire model refers to the international standard tire code, expressed in millimeters to indicate the section width and aspect ratio percentage. The body dimensions of the 2014 Peugeot 308 are: length 4558mm, width 1805mm, height 1505mm, with a wheelbase of 2612mm, a minimum ground clearance of 120mm, and a fuel tank capacity of 56 liters. The 2014 Peugeot 308 is equipped with a 1.6L naturally aspirated engine, delivering a maximum power of 86kW and a maximum torque of 150Nm, paired with a 5-speed manual transmission.
1
1
Share

What causes a sudden drop in engine RPM during car acceleration?

The reason is clutch slippage. Symptoms of clutch slippage: loss of power, increased fuel consumption, and accelerated wear. Below are relevant explanations: 1. Clutch function: The clutch serves to disconnect the driving wheel's power, but during vehicle movement the driven wheel still maintains rotation, requiring the synchronizer to coordinate engagement between the driving and driven wheels. After gear engagement is completed and the clutch is released, it resumes providing RPM and power to the driving wheel. 2. Clutch location: The clutch is located within the flywheel housing between the engine and transmission, with the clutch assembly secured by screws to the rear plane of the flywheel. The output shaft of the clutch is the input shaft of the transmission.
4
0
Share

Why Are Tires More Prone to Blowouts in Summer?

The reasons why tires are more prone to blowouts in summer are: 1. When driving under high-temperature conditions, the effect of thermal expansion and contraction makes tires more likely to deform; 2. As tires continuously generate heat during driving and dissipate it relatively slowly, the air pressure inside increases, leading to blowouts due to overly thin tire walls. Measures to prevent tire blowouts include: 1. Strictly avoid overloading, overcrowding, and speeding; 2. Regularly check tire pressure to maintain normal internal pressure; 3. Periodically rotate tires; 4. Regularly adjust wheel balance; 5. Opt for tubeless tires or radial tires whenever possible; 6. Maintain proper tire care.
2
1
Share

How to Replace the Battery in a Mercedes-Benz Viano 2.5 Key?

To replace the battery in the Mercedes-Benz Viano 2.5 key, follow these steps: 1. First, remove the mechanical key by sliding the switch at the top of the key, then pull the mechanical key upwards to extract it. 2. Use the extracted mechanical key to pry open the key cover by inserting it and gently lifting up and down. Once the back cover is removed, you can see the internal components. 3. Locate the battery inside the key, remove the old battery, and replace it with a new one. Finally, reattach the key cover to complete the battery replacement process.
2
2
Share

How to Cancel the Maintenance Reminder on a Ford?

Ford cancels the maintenance reminder by: first pressing the ignition switch off button, then stepping on the accelerator and brake pedals, waiting a few seconds before pressing the ignition switch on button. After 30 seconds, you will see the maintenance light flashing. At this point, turn off the ignition switch and simultaneously release the accelerator and brake pedals to clear the maintenance reminder. Below is some information about the brand: Ford is an American brand of car and one of the three major American car manufacturers. Its brand design concept originates from the signature font of its founder, Henry Ford. After entering the Chinese market, Ford partnered with Changan Automobile to establish Ford Mazda Co., Ltd., making it one of the high-quality and technically advanced car brands.
1
0
Share

What is the function of the Classic Focus cabin air filter?

Here are the specific functions of the Classic Focus cabin air filter: 1. Air filtration: Ensures the filter tightly adheres to the housing, preventing unfiltered air from entering the cabin. 2. Particle separation: Filters out solid impurities such as dust, pollen, and abrasive particles from the air. 3. Moisture adsorption: Absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., with strong and long-lasting moisture absorption capability. 4. Driving safety assurance: Prevents condensation on car windows, ensuring clear visibility for drivers; provides fresh air to the cabin, protecting occupants from inhaling harmful gases; effectively sterilizes and deodorizes.
1
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.