···
Log in / Register

What is the height of the Maxus V80?

4 Answers
DiEsther
07/30/25 1:39am
The specific body dimensions (length/width/height) are 5785/1998/2345mm respectively. Below is relevant information about the Maxus V80: 1. Introduction: The SAIC Maxus V80 is a commercial MPV meticulously developed by SAIC Maxus Automotive Co., Ltd. based on European automotive and design standards, cutting-edge energy-saving and environmental protection concepts, combined with comfortable driving experience. It is suitable for mobile business, commuting, and travel, while also serving urban logistics and special industry purposes. The V80 perfectly interprets the MAXUS brand's core values of "Technology, Trust, and Progress" with numerous international benchmarks, setting a standard for international commercial MPVs. 2. High Efficiency and Low Consumption: Equipped with Italian VM engine technology, it delivers an output power of up to 136 horsepower, with a fuel consumption as low as 5.4L per 100km at constant speed. Upgraded to meet China V standards, it complies with China V, Euro V, and Euro VI emission standards. The 4-cylinder 16-valve engine, with fuel pressure up to 1800Bar, ensures more complete combustion, greater power, lower fuel consumption, and reduced emissions.
Was this review help?
15
1
Share
VanMartin
08/15/25 7:27am
The height of the Maxus V80 is approximately 2270 mm, depending on the configuration. For example, the short-wheelbase version may be slightly shorter, while the long-wheelbase high-roof version is taller. I always pay special attention to this when driving, as there are often low bridges or underground parking lots in urban or rural areas with height limits around 2 meters. A taller vehicle can easily scrape the roof. I remember once encountering a 2.2-meter height limit barrier at a highway rest stop—the V80 barely made it through, but I had to slow down to ensure safety. This height design ensures spacious interior room, making it convenient for cargo or seating five to six people without feeling cramped, while also keeping wind resistance manageable and fuel consumption within a reasonable range. If you plan to convert it into an RV or use it for long-distance travel, the height factor should be considered in route planning to avoid choosing the wrong path. In short, always measure the entrance height of your usual parking spots before purchasing to prevent regrets later.
Was this review help?
4
2
Share
Expand All
Elise
10/20/25 8:29am
I've used the V80 to haul quite a bit of cargo before. Its height ranges between 2.15 to 2.3 meters, depending on whether you choose the standard or high-roof version. Height directly impacts practicality—the high-roof offers more space, reducing the need to bend over when moving furniture or equipment, but you need to be mindful of the higher center of gravity when turning, which can cause swaying. The lower version is more agile and easier to pass under height-restricted barriers. Most urban parking spaces are just over 2 meters tall, so the V80 sometimes can't enter underground garages, forcing you to find an outdoor spot, which can be annoying. I recommend getting into the habit of estimating the clearance before passing under height-restricted areas when driving daily. Height also affects in-cabin comfort—the high-roof version has better air circulation, keeping it less stuffy with more people, but wind noise at high speeds might be slightly louder, though it doesn’t significantly impact the overall driving experience.
Was this review help?
20
5
Share
Expand All
StJustin
12/04/25 2:13am
The typical height of the Maxus V80 is approximately 2270 mm, designed with consideration for interior space and maneuverability. Having driven similar light passenger vehicles, I often encountered issues in urban areas due to their height, such as encountering 2-meter height limit barriers, requiring the V80 to carefully navigate around them. This height allows for more passengers or cargo, but it affects driving stability, especially in windy or snowy conditions, making the vehicle prone to tilting, so it's important to hold the steering wheel firmly. On highways, be mindful not to exceed lane width limits, as some narrow roads can easily lead to sideswiping. During routine maintenance, remind to check the suspension and braking systems, as the height factor increases stress more noticeably, ensuring safety comes first.
Was this review help?
2
4
Share
Expand All
More Forum Discussions

Will the car alert when engine oil is low?

Yes, the car will alert when engine oil is low. The selection of engine oil and its brands is as follows: Engine oil selection: Naturally aspirated engines have relatively general requirements for oil quality. Mineral oil or semi-synthetic oil can be used. If the owner's budget allows, fully synthetic oil can be adopted. Compared to naturally aspirated engines, turbocharged engines have tighter structures and more demanding operating conditions, requiring higher-performance oil with better fluidity. Fully synthetic oil is recommended. Brand selection: For lubricant brand selection: if prioritizing oil longevity, Mobil lubricants can be chosen; if emphasizing the oil's engine cleaning capability, Shell oil is recommended; for lubricants requiring strong oil film toughness, Castrol is suitable. For example, turbocharged engines are prone to carbon deposits during high-speed operation, so Shell oil with strong cleaning capability can be selected.
2
5
Share

Does a Larger Pulley Make It Faster or a Smaller One?

If we consider only the rotational speed of the motor, the speed remains the same regardless of whether the motor's pulley is large or small. The importance of automotive belts and their inspection and replacement are as follows: Importance of Automotive Belts: The engine belt is the most crucial belt in a car, connecting the alternator, air conditioning compressor, power steering pump, idler pulley, tensioner pulley, and crankshaft pulley. When small cracks appear on the belt, it needs to be replaced. If the belt breaks, it can cause the alternator to stop generating electricity, the power steering pump to fail, and make steering difficult, which is a very dangerous situation. Inspection and Replacement of Automotive Belts: During every maintenance check, the belt tension and wear should be inspected. Even if everything appears normal, the belt should generally be proactively replaced at around 80,000 kilometers.
8
3
Share

Will I Get Penalty Points for Running Through a Yellow Light That Turns Red Midway?

No penalty points will be deducted. When a motor vehicle crosses the stop line while the traffic light is green or yellow, and the light turns red afterward, it is not considered a traffic violation. When passing through a signalized intersection, motor vehicles must always pay attention to the traffic light status, reduce speed, and avoid potential hazards. Specific circumstances of running a red light: If captured by surveillance cameras, the driver must go to the traffic police station to confirm the violation, and penalty points will be deducted accordingly. If no one acknowledges the violation, the vehicle management office will prevent the vehicle from passing its annual inspection until the violation is resolved. Important notes for handling traffic violations: The driver must be present in person to handle the violation. Required documents include the driver's ID card, driver's license, and vehicle registration certificate. When processing violations based on traffic monitoring records, the traffic management department can legally penalize the owner or manager of the violating vehicle.
5
5
Share

Is it recommended to apply a color-changing film to a new car?

It is not recommended to apply a color-changing film to a new car, but you can do so if you like, depending on your needs. Applying a color-changing film to a car: Applying a color-changing film to a car requires registration at the vehicle management office. According to current motor vehicle registration regulations, if the area of the color change does not exceed 30% of the vehicle's body, no change registration is required. If the color change exceeds 30%, it must be registered at the vehicle management office, and the new color must be one that was originally registered when the vehicle left the factory. Documents required for registration: The owner should go to the vehicle management office for change registration within ten days after the color change. The following documents are required: the original and a copy of the owner's identity proof, the motor vehicle registration certificate, and the motor vehicle driving license. If the process is handled by an agent, a power of attorney and the original and a copy of the agent's identity proof are also required.
13
2
Share

How much electricity does a parking diesel heater consume in one hour?

Parking diesel heaters do not require electricity. Introduction to Auto Hold: Auto Hold, also known as AUTO-HOLD, refers to an automatic braking function. When activated, such as when stopping at a traffic light, it eliminates the need to pull the handbrake, simplifying operations by avoiding the use of manual or electronic parking brakes. For automatic transmission models, it also prevents frequent switching between D to N or D to P. Working Principle of Auto Hold: The AUTO-HOLD function uses a slope sensor to provide precise parking force through the controller. During startup, the parking control unit calculates information from sensors such as the clutch distance sensor, clutch engagement speed sensor, and accelerator pedal sensor. When the driving force exceeds the running resistance, the parking brake is automatically released, allowing the vehicle to start smoothly.
20
1
Share

What are the three giants of the world tire industry?

Michelin, Bridgestone, and Goodyear are the three giants of the world tire industry. The performance and structure of tires are as follows: Tire performance: Tires are one of the important components of a car, directly in contact with the road surface, ensuring good ride comfort and smooth driving performance. They also ensure excellent adhesion between the wheels and the road, thereby improving the car's traction, braking, and off-road capability. Tire structure: Tires are generally composed of three parts: the outer tire, inner tube, and flap. The inner layer of the tire has a rubber layer with excellent air tightness, gradually moving towards lightweight development. The outer tire mainly consists of the carcass, tread, sidewall, and bead, with the carcass and bead forming the force-bearing structure of the car's pneumatic tire.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.