What is the height of the Coaster?

What does 'service' mean in a car?

service in a car is a maintenance reminder, commonly represented by a wrench-shaped maintenance light. 'Service' means repair, inspection, and maintenance. After a vehicle reaches a certain mileage, the owner should promptly replace the parts. When the car leaves the factory, the manufacturer sets a parameter; once the required mileage is reached, the word 'service' or a wrench icon will appear, reminding the owner that the car needs maintenance. The maintenance cycle for a car is every 5,000 to 8,000 kilometers driven, with the factory-set cycle usually being slightly more than 8,000 kilometers. Steps to reset the maintenance light: 1. Insert the key, noting that it should only be inserted without turning it; 2. Hold the trip meter's side lever for 5 to 10 seconds, then turn on the power; 3. After 5 to 10 seconds, start the car, keeping the lever pressed throughout this process without releasing it.

13

2

Share

What brand is the Mercedes-Benz 7-speed transmission?

Mercedes-Benz uses transmissions produced by Mercedes-Benz itself. The earliest model used was the 722.6 transmission, followed by the production of the 722.8 transmission. Models such as the Mercedes-Benz E230, E280, E350, C280, S300, S350, and S500 all utilize the Mercedes-Benz 7-speed transmission. Advantages of the Mercedes-Benz 7-speed transmission: 1. Smooth shifting: Enhances shifting comfort. The Mercedes-Benz 7-speed transmission can shift quickly within 0.1 to 2.5 seconds, reducing the computer response time by 0.1 seconds, downshift time to 0.2 seconds, coasting downshift time by 0.4 to 2.5 seconds, and acceleration time from 37 to 74 mph by 23% to 28%. 2. Reduced fuel consumption: The Mercedes-Benz 7-speed transmission can reduce fuel consumption by over 4%, increasing lifespan and reliability.

7

4

Share

What does the car ECT mean?

Car ECT refers to the transmission electronic control mode switch. When turned on, it activates the car's sport mode, which increases torque but also fuel consumption, making it more suitable for highway use. When turned off, it switches to the car's economy mode, which is more fuel-efficient. More related information is as follows: 1. ECT: The ECT button is mostly found in Japanese cars, with Toyota being the most common. This system is called the Electronic Throttle Control System. It has three modes: normal, sport, and snow mode. The normal mode is the economy mode, where the car's fuel efficiency is higher, and fuel consumption is reduced. 2. ECT mode is a rapid acceleration mode: Similar to a sport racing mode, it can quickly increase the engine's RPM. When activated, the throttle feels more responsive and direct, and the gear shift timing is usually above 4500 RPM. 3. When the ECT switch is turned off: The transmission switches to standard mode, where the shift logic is determined by the actual road conditions and the driver's intentions.

11

3

Share

What does the triangular exclamation mark on the Audi dashboard mean?

A triangle with an exclamation mark inside indicates a malfunction in the vehicle's general performance, components, or functions. Common issues include parking sensor failure, fuel cutoff system intervention or malfunction, external light failure, or engine oil pressure sensor failure. Solution: It is necessary to visit a 4S shop for inspection to identify the source of the fault. The exclamation mark is a common fault indicator in vehicles. Besides the triangular exclamation mark, there are four other forms of exclamation mark indicators: a yellow gear with an exclamation mark inside, a red circle with parentheses and an exclamation mark in the middle, a yellow bracket with a horizontal line and an exclamation mark in the middle, and a yellow bulb with an exclamation mark. Below is a detailed analysis of these four scenarios: Automatic transmission fault: A yellow gear with an exclamation mark inside is the automatic transmission fault warning light, indicating a fault in the transmission or transmission lubricant level below the normal range. Transmission fluid should be replaced promptly. Brake system fault: A circle with parentheses and an exclamation mark in the middle represents a brake system warning, mainly indicating a brake system malfunction or low brake fluid level. Immediate inspection of the brake system is required to avoid accidents. Tire pressure abnormality: A bracket with a horizontal line and an exclamation mark in the middle represents the tire pressure monitoring warning light, which illuminates when the vehicle's tire pressure is too low. Check the tire pressure and restore it to the normal range. Lighting fault: A yellow bulb with an exclamation mark is the lighting fault indicator, signaling a malfunction in the vehicle's lights. Solution: Visit a 4S shop for inspection as soon as possible, or conduct a self-check focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting to identify the issue.

14

3

Share

What are the symptoms of a small amount of water entering the engine?

When a small amount of water enters the engine, the main symptoms include engine stalling while driving, brake failure, whitening of engine oil, and white smoke from the exhaust pipe. The primary manifestations of a small amount of water entering the engine are as follows: 1. Engine stalling while driving: When the vehicle experiences a lack of power during acceleration or suddenly stalls while driving, it is usually due to water entering the engine's combustion chamber, preventing the spark plugs from functioning properly. 2. Brake failure: If the vehicle exhibits symptoms of weak braking or complete brake failure, it may be due to water entering the brake fluid, causing it to vaporize under high temperatures. 3. Whitening of engine oil: Normal engine oil is light yellow or colorless. If the oil turns white or becomes cloudy, it may indicate the presence of water. 4. White smoke from the exhaust pipe: When water enters the engine fuel or cylinders, the high temperatures generated by the engine's operation will vaporize it, forming water vapor that is expelled through the exhaust pipe.

12

3

Share

How long after obtaining a driver's license can you drive?

You can drive immediately after obtaining your license. According to regulations: The first 12 months after a motor vehicle driver initially obtains a motor vehicle driving license is the probationary period. When driving a motor vehicle during the probationary period, a standardized probationary sign must be affixed or hung at the rear of the vehicle. More extended information is as follows: 1. During the probationary period, motor vehicle drivers: are not allowed to drive buses, operating passenger vehicles, or police cars, fire trucks, ambulances, engineering rescue vehicles on duty, or motor vehicles carrying explosives, flammable and explosive chemicals, highly toxic or radioactive hazardous materials; the driven motor vehicle must not tow a trailer. 2. New drivers should note: Maintain a certain distance from the vehicle in front. It is advisable for first-time drivers to be accompanied by someone with driving experience from 58 Auto. Learning some tips from experienced drivers is particularly important for beginners. 3. Gradual progress and calmness: When first starting to drive, do not enter areas with complex road conditions too early. Gradually overcome the fear of other vehicles and build driving confidence step by step.

15

4

Share

What is the height of the Coaster?

What does 'service' mean in a car?

What brand is the Mercedes-Benz 7-speed transmission?

What does the car ECT mean?

What does the triangular exclamation mark on the Audi dashboard mean?

What are the symptoms of a small amount of water entering the engine?

How long after obtaining a driver's license can you drive?

What are the mild symptoms of water entering the engine?

What are the three major components of the new Besturn B70?

Does the Wildlander Luxury Edition have tire pressure monitoring?

What should be noted after a car is newly tinted?