What is the Guangben CRIDER?

1 Answers
JosephineAnn
07/30/25 3:05am
Guangben CRIDER is the Lingpai, which is a compact sedan under Honda. This car has both pure gasoline and hybrid versions. The Lingpai has a wheelbase of 2730 mm, a length of 4756 mm, a width of 1804 mm, and a height of 1509 mm. The hybrid version is equipped with a 1.5-liter naturally aspirated engine, which delivers 109 horsepower and a maximum torque of 134 Nm. The gasoline version uses a 1.0-liter turbocharged three-cylinder engine with a maximum power of 90 kW and a maximum torque of 173 Nm. The front suspension of the Lingpai uses a MacPherson independent suspension, while the rear suspension uses a torsion beam non-independent suspension.
Was this review help?
16
0
Share
More Forum Discussions

How to Install Car License Plate Screws?

Below is the installation tutorial for car license plate screws: 1. After receiving the license plate, you will generally be provided with two packs of professional screws for installation. Insert the screws into the holes, rotating them as you insert. Be careful not to insert them backwards. 2. Take out the car license plate and first position it correctly by hand, ensuring the left and right distances are as equal as possible to maintain symmetry and aesthetic appeal. Make sure the four screw holes on the license plate align with the four holes on the bumper. 3. Use a screwdriver to tighten the screws. Once tightened, gently press the anti-theft caps into place. These are one-time-use anti-theft caps and cannot be removed once pressed in.
17
5
Share

Which is brighter, xenon headlights or LED headlights for cars?

LED headlights have stronger light. The characteristics of LED car headlights are as follows: 1. Energy-saving: LED car lights are cold light sources, generally consuming less power, saving more than 70% energy compared to traditional light sources; 2. Environmental protection: The spectrum contains no ultraviolet or infrared rays, producing neither heat nor radiation, with minimal glare. The waste is recyclable, pollution-free, and contains no mercury, making it safe to touch and a typical green lighting LED source; 3. Long lifespan: There are no loose parts inside the lamp body, eliminating issues like filament burnout, heat deposition, and light degradation. With appropriate current and voltage, the service life can reach 60,000 to 100,000 hours, more than 10 times longer than traditional light sources; 4. High brightness and high temperature resistance.
14
1
Share

Is Opening the Cylinder Head Considered an Engine Overhaul?

Simply removing the cylinder head to inspect the cylinder block does not qualify as an overhaul, but replacing components such as the crankshaft, connecting rods, and pistons is considered an overhaul. Below are precautions for disassembling and assembling an automobile cylinder head: 1. First, check for any residual antifreeze in the cylinder head bolt holes or other holes. If present, remove it immediately and replace the cylinder head gasket and other sealing gaskets. 2. Rotate the crankshaft by hand to position one of the engine's pistons at the top dead center (TDC) of the compression stroke. Then, slightly reverse the crankshaft and insert the guide bolt of the specialized tool into the cylinder head bolt hole for positioning. 3. Remove the cylinder head nuts symmetrically from both ends toward the center, then take off the cylinder head and cylinder liner gasket. The timing belt and multi-ribbed belt should be handled in the reverse order of disassembly, and the tension and valve timing should be adjusted. 4. If the cylinder head is difficult to remove, gently tap it with a wooden mallet or rotate the crankshaft to use the gas pressure inside the cylinder to help dislodge the cylinder head. Alternatively, you can weld a handle onto an old spark plug, screw it into the spark plug hole, and use it as leverage for easier removal.
20
1
Share

What Are the Benefits of a Car Air Conditioning Filter?

Car air conditioning filters serve the following purposes: 1. Provide fresh air: They prevent car windows from fogging up, ensuring clear visibility for safe driving; supply fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety; effectively sterilize and deodorize. 2. Ensure safety and hygiene: They maintain clean cabin air free from bacterial growth, creating a healthy environment; effectively separate solid impurities like dust, powder, and grinding particles from the air; efficiently block pollen to prevent allergic reactions that could compromise driving safety. 3. Adsorb harmful substances: They adsorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air; feature strong and durable moisture adsorption capabilities. 4. Filter solid impurities: The car air conditioning filter fits tightly within the housing to ensure unfiltered air does not enter the cabin. It separates solid impurities like dust, pollen, and grinding particles from the air.
12
2
Share

Is Fuel Additive Effective for Cleaning the Catalytic Converter?

Theoretically effective, but if you're not certain the catalytic converter is clogged, it's best not to clean it, as it might have the opposite effect. More information about fuel additives is as follows: 1. Fuel additives are categorized by usage into gasoline additives and diesel additives. Functionally, they are generally divided into three types: cleaning, maintenance, and performance-enhancing. 2. Both cleaning and maintenance types contain cleaning agents in their chemical compositions, which can effectively clean or inhibit carbon deposits in the engine. Depending on the chemical composition, additives are classified into five generations. 3. Performance-enhancing types usually contain metal components, such as MMT (manganese) and other metal compounds, which can address issues like insufficient power and fault codes caused by poor fuel quality.
4
5
Share

How to Distinguish the Inside and Outside of a Tire?

Tire inside and outside distinction methods are as follows: 1. Symmetrical tread refers to a tread pattern where both sides are the same or similar, centered around the central groove of the tread. There is not much difference between the front and back of such patterns, but generally, the side with the date should face outward. 2. For unidirectional tires, first consider the specific position where the tire and wheel assembly will be installed on the vehicle. Then, mount the tire onto the wheel according to the rotation arrow indicated on the tire sidewall. After the tire and wheel assembly are installed on the vehicle, it is necessary to check and ensure that the rotation arrow on the tire sidewall aligns with the forward direction of the vehicle. 3. For asymmetric tread tires, when installing the tire on the rim, it is important to ensure that the side of the tire marked with the word 'outside' in English faces outward. Installing it incorrectly will reduce the performance of the tire.
17
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.