···
Log in / Register

What is the ground clearance of Wuling Hongguang Plus in centimeters?

4 Answers
DiThomas
07/23/25 9:02pm
Wuling Hongguang Plus has a ground clearance of 18.7 centimeters, which generally refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting plane when the car is fully loaded and stationary. This measurement is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Wuling Hongguang PLUS is positioned as a wide-body business vehicle, equipped with a 1.5T engine across the entire lineup, delivering a maximum torque of 250Nm, paired with a 6-speed manual transmission, and complies with the National VI emission standards. The Wuling Hongguang Plus comes standard with ABS, EBD system, EPS electric power steering, and more. In terms of body dimensions, the Wuling Hongguang Plus measures 4720mm in length, 1840mm in width, and 1810mm in height.
Was this review help?
3
1
Share
DiJoy
08/10/25 4:42pm
The Wuling Hongguang Plus has a ground clearance of approximately 18 centimeters, or 180 millimeters, according to official specifications. From my personal experience, this height is quite suitable for various road conditions, such as driving on rural dirt roads or passing through small puddles, generally avoiding scraping the undercarriage and improving passability. It's slightly higher than a regular sedan but not as high as a dedicated off-road vehicle. When driving, it's important not to overload, as the increased weight can reduce the clearance. It's also recommended to install an undercarriage guard to prevent damage from stones. Overall, the design prioritizes practicality, making it user-friendly, especially for families or rural owners who frequently transport goods. Keep in mind that the actual height may vary with load and road conditions, but the standard 18 cm clearance helps avoid many potential issues.
Was this review help?
1
1
Share
Expand All
DeBella
09/23/25 4:25am
The ground clearance of the Wuling Hongguang Plus is 180mm, which is equivalent to 18 centimeters. I've checked this value online, and my real-world experience supports it. When driving this car in the city, the 18-centimeter clearance makes me feel much more comfortable—no worries about scraping over speed bumps, and it handles small waterlogged areas in the rain just fine. However, it's not designed for off-roading; if the road conditions are too poor or the vehicle is overloaded, the height will decrease. I recommend owners measure it with a tape measure, simply from the lowest point to the ground. For maintenance, regular cleaning of the chassis can reduce rust. This height is slightly higher than similar MPVs, making it both safe and easy to drive.
Was this review help?
8
5
Share
Expand All
McRonan
11/06/25 6:41am
The chassis height of the Wuling Hongguang Plus is approximately 180mm, which is 18 centimeters! I've driven it for outings, and this height is very practical when going over slopes or bumpy roads, making it less prone to scraping. For modifications, you can add protective components. The measurement method is to measure the lowest point when unloaded.
Was this review help?
10
4
Share
Expand All
More Forum Discussions

What to Do If the Car Stalls in Deep Water?

If the car stalls in deep water, do not attempt to restart the vehicle immediately. Instead, call your insurance company and a repair service for assistance. Here is relevant information: 1. Skidding: Driving on waterlogged roads reduces braking efficiency and increases the risk of skidding. Hold the steering wheel firmly with both hands, maintain a straight path and drive at low speed. When turning, apply the brakes gently to prevent wheel lock-up and skidding. 2. Never restart the engine after stalling in water: In such cases, promptly contact an authorized 4S shop for repairs and inform them that the car stalled due to water exposure to avoid engine damage from accidental restart during repairs. Professional 4S shops will use computer diagnostic tools to immediately determine the cause of the stall. Most roadside repair shops lack this advanced diagnostic system.
5
4
Share

Is the thick or thin car air conditioning pipe the high-pressure one?

The thin car air conditioning pipe is the high-pressure pipe, while the thick one is the low-pressure pipe. Below are other methods to distinguish them: 1. High-pressure: Another way to distinguish is that the compressor to the condenser and the condenser to the evaporator box are all high-pressure. 2. Low-pressure: From the evaporator box to the compressor is low-pressure. Below are the steps to replace the air filter: 1. Choose the filter: Select the appropriate filter. 2. Unpack the filter: Open the new filter packaging and check if it is intact and undamaged. 3. Remove the filter: Remove the original car filter. 4. Take off the felt pad: Remove the felt pad covering the air outlet. 5. Open the cover: After removing the felt pad, you will see the rectangular cover of the air filter. Pull the cover to the right to open it. 6. Replace the filter: Take out the old filter and replace it with the new one.
6
2
Share

Does the door light consume power if it stays on?

If the door light stays on, it definitely consumes power, but the amount is not significant. Here is relevant information: 1. Close the car door: The switches for the car doors and windows rely on the battery for power, so it's best to close all windows before turning off the engine, close the doors after turning off the engine, and use the long-press lock button method to secure the doors after leaving the car. 2. Turn off the air conditioning and audio before shutting down the engine: The air conditioning system involves the compressor, blower, and audio, which are high-power electrical devices. Not turning them off before shutting down the engine will place a heavy burden on the battery and cause damage. 3. Avoid leaving the vehicle parked for long periods: The car's battery will automatically discharge during prolonged inactivity. The vehicle should be used regularly to prevent automatic battery discharge issues.
8
5
Share

What Stickers Should Be Displayed on a Car?

Vehicle inspection compliance sticker, vehicle environmental protection sticker, compulsory insurance sticker. The following is relevant information about vehicle stickers: Vehicle inspection compliance sticker: Valid for one year. Vehicle environmental protection sticker: Issued for energy-saving and emission-reduction inspections and regular vehicle environmental protection checks, categorized into yellow and green labels, requiring annual inspection. Compulsory insurance sticker: Currently, vehicles only need to display two stickers: compulsory insurance and annual inspection. The environmental protection sticker has been canceled and merged with the annual inspection sticker. Private vehicles with 6 seats or fewer (including 6 seats) are exempt from on-site inspections for the first 6 years, but must submit compulsory insurance documents to the traffic police department every 2 years to renew the annual inspection sticker. Starting from the 6th year, vehicles must undergo annual inspections until the vehicle reaches 15 years old.
10
0
Share

How to Open the Engine Hood of the Buick Excelle?

The operation to open the engine hood of the Buick Excelle is as follows: Locate the engine hood release lever below the steering wheel on the left side, pull it upwards to release, and then return it to its original position. There is a safety latch in the center front of the vehicle hood. Move the safety latch towards the driver's side of the vehicle and lift the engine hood to open it. When closing the engine hood: First, lower the hood support stand, while using your other hand to hold the hood. Slowly lower it until the hood is about 50mm-60mm from closing, then let it drop freely. You will hear a 'clunk' sound indicating that it is securely locked. If you do not allow the hood to drop freely from this height, it may not close properly. Of course, if you release it from too high, it might cause distress to car owners who cherish their vehicles.
1
4
Share

What is the difference between high-power and low-power engines in cars?

High-power engines and low-power engines differ not only in turbo pressure and control programs, but also in compression ratio, piston shape, and cooling system design. Many turbocharged models utilize both high-power and low-power engines. Relevant details are as follows: 1. Fuel: A car engine uses a mixture of fuel and air as its fuel source. By increasing the intake air volume and correspondingly increasing the fuel injection volume, the amount of fuel in the engine can be increased. With more fuel in the engine, the power output of the car engine can be enhanced. 2. Turbocharger: Turbocharged engines are equipped with a turbocharger, which consists of two parts: a compression turbine and an exhaust turbine. The compression turbine and exhaust turbine are connected by the same shaft, with the compression turbine linked to the engine's intake manifold and the exhaust turbine connected to the engine's exhaust manifold.
19
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.