What is the ground clearance of the Zotye Z500?

3 Answers
LorenzoDella
07/29/25 7:29am
The ground clearance of the Zotye Z500 is approximately 15 centimeters. Ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Zotye Z500 is the first independently developed high-end B-class sedan by Zotye Auto, featuring international mainstream design, abundant technological configurations, and strong power performance. The car is equipped with a 1.5-liter turbocharged engine, paired with either a 5-speed manual transmission or a CVT transmission. The front suspension of the Zotye Z500 uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension. The vehicle's dimensions are 4750 mm in length, 1810 mm in width, and 1490 mm in height, with a wheelbase of 2750 mm.
Was this review help?
12
5
Share
Sousa
08/13/25 1:02am
As someone who often helps friends check out cars, the ground clearance of the Zotye Z500 is about 140mm, which is quite suitable for urban roads. A slightly higher chassis can prevent scraping against curbs or uneven surfaces, such as when going up or down slopes or encountering potholes, avoiding undercarriage damage. However, remember that too much height can affect handling stability, especially during high-speed turns where it may feel shaky. It's recommended to regularly inspect the suspension system, checking for tire wear or spring tension, as these can cause changes in the actual ground clearance. The 140mm design balances passability and comfort, making it quite reliable for urban commuting and family use, and parking is also convenient.
Was this review help?
4
2
Share
Expand All
OSamantha
10/04/25 7:21am
I've been driving the Zotye Z500 for a while now, with a ground clearance of about 140mm, and it feels quite balanced in practical use. For daily commutes or picking up kids, going over speed bumps and curbs doesn't feel bumpy, and the wheels don't easily scrape the curb when parking roadside. Compared to some low-clearance vehicles, this height helps a lot, but you need to be careful on muddy dirt roads to avoid mud buildup under the chassis. Additionally, loading heavy items in the trunk might slightly reduce the clearance, so I always make sure not to overload it. Overall, this design enhances practicality, especially for new drivers or those frequently driving in congested urban areas.
Was this review help?
8
2
Share
Expand All
More Forum Discussions

What is the difference between starting with the clutch pressed and without pressing the clutch?

The difference between starting with the clutch pressed and without pressing the clutch: 1. For the car: Starting with the clutch pressed can protect the car's engine and starter. Pressing the clutch is equivalent to cutting off the current to the starter, making it easier to start the car. 2. Safety aspect: Starting with the clutch pressed can prevent operational errors. When on an incline, the car is usually in 1st gear. Pressing the clutch when starting ensures the car does not roll back, ensuring the safety of the vehicle and the driver. Below are some tips for starting the car: 1. Check if the gear is in neutral, press the clutch. If on flat ground, you can start directly. If on a slope, press both the clutch and brake before starting. 2. After starting, check if the handbrake is released, shift into 1st gear, release the brake and clutch, and the car will start moving normally.
7
2
Share

What Causes Heavy Brakes and Failure to Start?

It may be because the driver pressed the brake pedal several times after turning off the engine, causing the vacuum in the brake booster to disappear. Without the booster's assistance, the brake pedal becomes harder to press. Additionally, the booster pump does not operate when the engine is off. Below are some braking precautions: 1. At low speeds, you can perform emergency braking by fully pressing the brake pedal if an unexpected event occurs ahead. However, avoid doing this at high speeds to prevent the vehicle from skidding or rolling over. 2. During normal driving conditions, apply gradual braking by pressing the clutch pedal while releasing the accelerator, then shift to a lower gear. Once the speed decreases, release the clutch pedal and press the brake pedal until the vehicle stops. 3. On long downhill slopes in mountainous areas or during continuous braking that generates high temperatures, intermittent braking—alternately pressing and releasing the brake pedal—can effectively prevent the braking system from overheating.
1
2
Share

What car has a ram head logo?

The ram head logo represents the Dodge brand of vehicles, headquartered in the United States. Here is some relevant information: The Dodge trademark uses the surname of the Dodge brothers: Dodge. The graphic trademark features a ram head image inside a pentagon, with both a small ram and a large ram used as logos on vehicles. Dodge is one of the three major automotive brands under the Chrysler Group, encompassing a range of cars, trucks, light commercial vehicles, and sport utility vehicles (SUVs). Main models include the Dodge Caliber, Dodge Viper, Dodge Magnum, Dodge Ram, Dodge Caravan, and Dodge Charger, among others.
6
1
Share

Which province does the 'Jiang' license plate belong to?

The 'Jiang' license plate does not exist; it is a fictional license plate used in TV dramas to avoid causing deep social reactions. Below is relevant information about vehicle license plates: 1. The differences between local and out-of-town license plates include: different license plate contents; differences in annual inspections, with out-of-town license plates being more cumbersome; different travel restrictions, as local license plates face fewer restrictions within their region, while out-of-town license plates have more; and differences in replacement procedures, as lost driving permits or license plates can only be reissued at the vehicle's registration location. 2. License plates, commonly referred to as vehicle tags, are plates affixed to the front and rear of vehicles, typically made of aluminum, sheet metal, plastic, or paper, bearing the vehicle's registration number, registration region, or other relevant information. 3. License plates serve to number and record information for each vehicle, primarily enabling identification of the vehicle's region of registration and allowing access to the vehicle owner's details and registration information through the license plate.
15
2
Share

What car brand has a logo featuring a cross and a snake?

The logo featuring a cross and a snake corresponds to the Italian brand Alfa Romeo. Here is some relevant information: Alfa Romeo is an Italian sports car and racing car manufacturer founded in 1910. Currently, Alfa Romeo is part of the Fiat Group. Ferrari, Maserati, and Alfa Romeo are all brands under the Fiat Group. Additionally, some of Ferrari's engine technologies are shared with Maserati and Alfa Romeo. Alfa Romeo sells two models in China: one is the mid-size sports sedan Giulia, and the other is the luxury sports SUV Stelvio.
16
1
Share

Is Baked Paint or Spray Paint Better at 4S Stores?

Baked paint is better than spray paint. The comparison between baked paint and spray paint is as follows: 1. From the process perspective: (1) Baked paint involves applying three layers of primer and four layers of topcoat on the substrate. Each layer is then sent into a dust-free, temperature-controlled baking room for curing. (2) Spray paint involves sanding the substrate, applying paint, and letting it dry naturally. 2. From the paint film perspective: (1) Baked paint has smooth edges, uniform color, even paint film, and rich color saturation. (2) Spray paint has rough edges, lighter color than the door panel, uneven paint film, and poor color saturation. 3. From the texture perspective: (1) Baked paint door panels have a smooth surface with no texture but may show orange peel effect. (2) Spray paint door panels have a rough surface with visible texture but no orange peel effect. 4. From the surface perspective: (1) Baked paint door panels have a flat and smooth surface. (2) Spray paint door panels have a surface with particles, not smooth, and a strange feel when touched. 5. From the wear resistance perspective: (1) When hitting the paint film with a hard object, if there is no damage, it is baked paint. (2) When hitting the paint film with a hard object, if there are cracks, paint film peeling, or white flakes coming off, it is spray paint.
6
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.