What is the ground clearance of the XT5 chassis?

3 Answers
Anthony
07/23/25 10:54pm
The XT5, a mid-size SUV, features a MacPherson independent front suspension. The ground clearance of the XT5 chassis is 17 cm. The correct term for chassis height should be the minimum ground clearance, which refers to the distance between the car's chassis and the ground when the vehicle is at its maximum load capacity. In terms of appearance: The Cadillac XT5 continues the rugged design style of its predecessor. The car's exterior adopts a diamond-cut design concept, with an inverted trapezoidal front grille and vertical waterfall-style teardrop headlights that are highly recognizable. In terms of interior: The interior of this car features a wraparound design, with a cockpit that emphasizes a strong sense of layering. The central display screen is embedded, but the dashboard is inclined towards the driver's side for easy operation while driving. In terms of power: This car is equipped with a 2.0T turbocharged engine, which delivers a maximum power of 177 kW and a maximum torque of 350 Nm. The engine is paired with a 9-speed automatic transmission in the drivetrain system.
Was this review help?
15
3
Share
MatthewRose
08/10/25 6:39pm
As someone who pays close attention to automotive details, I've researched that the Cadillac XT5 has a ground clearance of approximately 170 millimeters, which is about 6.7 inches. This is considered above average among SUVs. In daily driving, this height gives me peace of mind in urban traffic or when going over speed bumps—for example, navigating parking garage ramps is effortless. Compared to other models like the Honda CR-V with 150mm, the XT5 is slightly taller, making it more suitable for occasional light off-roading, such as driving through waterlogged roads during rain or snow without risking engine damage. However, it shouldn't be too high either, as that could increase body roll and fuel consumption. A mechanic reminded me to regularly inspect the underbody protection plates to avoid damage from stones. Overall, the XT5's design is well-balanced—the 170mm height ensures good clearance without sacrificing comfort, making it ideal for urban family use.
Was this review help?
13
1
Share
Expand All
LeStella
09/23/25 7:01am
I've been driving my XT5 for several years, and its 170mm ground clearance is truly practical. When picking up and dropping off kids at school, I never worry about scraping the chassis on potholes. The measurement of approximately 170 millimeters equates to 6.7 inches. It's significantly higher than sedans, providing extra confidence when driving through flooded sections during rain or snow. In real-world experience, it's not exceptionally high, but handles construction zones and gravel roads effortlessly. During maintenance, experts mentioned this height is reasonably designed to balance fuel efficiency and safety. Compared to other SUVs like the Toyota RAV4's 165mm, the XT5 has a slight edge, making me feel it's great value for money. I recommend owners watch for road debris and avoid prolonged driving on rough terrain to prevent chassis wear. The moderate height boosts overall driving confidence.
Was this review help?
13
5
Share
Expand All
More Forum Discussions

Is It Necessary to Press the Brake to Shift Gears in an Automatic Transmission?

It is not always necessary to press the brake to shift gears in an automatic transmission. The specific scenarios are as follows: 1. Shifting from P (Park) to R (Reverse) requires pressing the brake; 2. Shifting from P (Park) to D (Drive) requires pressing the brake; 3. Shifting from D (Drive) to N (Neutral) does not require pressing the brake; 4. Shifting from R (Reverse) to N (Neutral) does not require pressing the brake; 5. Shifting from N (Neutral) to D (Drive) requires pressing the brake; 6. Shifting from N (Neutral) to R (Reverse) requires pressing the brake; 7. Shifting from D (Drive) to S (Sport) does not require pressing the brake. An automatic transmission eliminates the need for manual gear shifting while driving, as the transmission control system automatically selects the appropriate gear based on engine speed and load, replacing the driver's subjective judgment and manual shifting operations.
8
5
Share

Is it a traffic violation to run a red light when following a large vehicle under the new traffic regulations?

In general, when a motor vehicle is photographed following a large vehicle, it is usually because the driver is rushing through the intersection. This behavior can only be penalized as running a red light. However, if it is confirmed that the driver could not see the traffic signal due to the obstruction of the large vehicle, they can apply for reconsideration after being penalized. Drivers should maintain sufficient visibility range, ensuring they can see the traffic signals ahead and maintain a safe braking distance. Penalty points for running a red light: According to Article 2, Section 1, Clause 2 of the "Scoring Standards for Road Traffic Safety Violations," driving a motor vehicle in violation of traffic signal lights results in a deduction of 6 points. Article 3, Section 1, Clause 8 states that driving a motor vehicle in violation of prohibition signs or markings results in a deduction of 3 points. How to check for red light violations: You can check for red light violations through the "Traffic Management 12123" app. After opening the app, log in using your ID card, then find and click on the "Violation Handling" option. In the violation handling section, you can see the current status of your vehicle. If there are any violations, the specific details will be displayed. You can also check at the office halls of the traffic police branches in various districts and counties by using the touch query terminals. Alternatively, log in to the external service websites of the Public Security Traffic Management Bureau of each city: find the "Vehicle Violation Query" section, enter your license plate number and vehicle engine number, and click "Query" to check.
5
3
Share

How to Open the Fuel Tank of an Audi?

Audi's fuel tank opening steps are: 1. Press the electronic fuel tank cap release switch located inside the car to unlock the fuel tank cap; 2. Gently lift the fuel tank cap cover by hand. Audi is a luxury car brand under Audi AG, a subsidiary of the Volkswagen Group in Germany. Its main models include the A1, A3, A4, A5, A6, A7, A8, Q1, Q2, Q3, Q5, Q7, Q8, TT, R8, and the S and RS performance series. Taking the Audi A4 as an example, it is a popular B-segment model manufactured by FAW-Volkswagen. The car measures 4761mm in length, 1826mm in width, and 1439mm in height, with a wheelbase of 2869mm, and comes in three engine displacements: 1.8T, 2.4, and 3.0.
19
2
Share

What is the reason why the Great Wall Haval H6 key cannot be turned?

Great Wall Haval H6 key cannot be turned because the steering wheel is locked. Just hold the steering wheel with your left hand and gently shake it while turning the key with your right hand. The steering wheel is a wheel-shaped device used to control the direction of cars, ships, airplanes, etc. Its function is to convert the force applied by the driver to the edge of the steering wheel into torque and then transmit it to the steering shaft. The Great Wall Haval H6 is a compact SUV under the Haval brand. The vehicle has a length, width, and height of 4640mm, 1825mm, and 1690mm respectively, with a wheelbase of 2680mm. It features a MacPherson independent front suspension and a multi-link independent rear suspension. It is equipped with a 1.5GDIT or 2.0GDIT engine, paired with a 7DCT wet dual-clutch transmission.
2
2
Share

What is the material of the CFMOTO 250SR wheel hub?

The material of the CFMOTO 250SR wheel hub is aluminum alloy. Definition of wheel hub: The wheel hub is the rotating part where the inner rim of the tire connects to the wheel center through spokes, i.e., the metal component mounted on the axle that supports the tire. It is also called wheel rim, steel rim, or simply rim. Wheel hubs come in various types based on diameter, width, manufacturing method, and material. Advantages of aluminum alloy wheel hubs: Low density, approximately 1/3 that of steel, meaning an aluminum alloy wheel hub of the same volume will be 2/3 lighter than a steel one. Aluminum alloy can be age-hardened; untreated aluminum alloy wheel hub castings have low strength, making them easy to machine and form. After corrosion-resistant treatment and painting, aluminum alloy wheel hubs exhibit diverse colors and exquisite, aesthetically pleasing finishes.
4
3
Share

Why Do Motorcycles Need to Blip the Throttle When Downshifting?

Motorcycles blip the throttle when downshifting to eliminate the speed difference between the engine and the transmission, ensuring the engine speed matches the gear as closely as possible. This helps reduce the jerking sensation during downshifting. Functions of Throttle Blipping When Downshifting: When shifting from a higher gear to a lower gear, it makes the transition smoother and reduces engine braking. Maintaining high RPMs allows for quicker acceleration after exiting a turn. It also protects the transmission and reduces brake pressure. How to Perform Throttle Blipping When Downshifting: First, press the clutch, then shift the gear lever to neutral. Next, blip the throttle with your right foot, shift the lever into the lower gear, and release the clutch—all in one smooth motion. The key challenge is mastering the throttle input: it must be just enough to prevent jerking, and adjustments should be made based on speed and gear.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.