What is the ground clearance of the Volkswagen Sharan?

2 Answers
VonBrantley
07/29/25 5:31am
The ground clearance of the Sharan is 152 millimeters. Ground clearance refers to the distance between the ground and the rigid objects at the bottom of the vehicle. Here is some information about the Sharan: 1. Vehicle dimensions: The Sharan is a 5-door, 7-seater MPV with body dimensions of 4854 mm in length, 1904 mm in width, 1740 mm in height, and a wheelbase of 2920 mm. 2. Powertrain: The Sharan is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110 kW at 5000 to 6000 rpm and a maximum torque of 250 Nm at 1500 to 3500 rpm, paired with a 6-speed dual-clutch transmission.
Was this review help?
2
1
Share
VanCarter
08/12/25 9:05am
The Volkswagen Sharan typically has a ground clearance of around 160mm. As an MPV, this height ensures both urban driving comfort and sufficient passability on moderately uneven roads. I often discuss this with fellow car enthusiasts and find that while it's not as high as an SUV, it's much more versatile than a regular sedan. For example, there's minimal body roll over speed bumps, avoiding excessive bumpiness, and it handles muddy sections smoothly as long as deep potholes are avoided. For maintenance, I recommend regular checks on tire pressure and the suspension system, as excessive wear can reduce clearance and impact fuel efficiency. Overall, it's an excellent choice for a balanced, practical family car, well-suited for daily commutes and light outings.
Was this review help?
12
3
Share
Expand All
More Forum Discussions

How Long Does It Take to Check Traffic Light Violations?

Traffic light violations can typically be checked online within five working days. Here is more information: Methods to check traffic light violation results: You can check through online vehicle violation queries, or visit the vehicle management office or traffic police station. Note that when visiting the management office, bring the vehicle's registration certificate and driver's license for the vehicle that ran the red light. Penalties for traffic light violations: Running a red light refers to the act of a motor vehicle violating the prohibition of passage during the red light phase at a signal-controlled intersection or road section, crossing the stop line and continuing to drive. According to the latest revised "Regulations on the Application and Use of Motor Vehicle Driving Licenses," running a red light results in 6 penalty points and a fine.
2
4
Share

Will roadside parking result in penalty points?

Roadside parking will incur penalty points if it constitutes illegal parking. Here is more information: Penalties for illegal roadside parking: Illegal parking refers to situations where a vehicle violates Article 63 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," meaning parking in an unauthorized location. Parking by the roadside in violation of prohibition signs will result in fines and penalty points. Correct roadside parking method: Always park within marked parking spaces when parking roadside. Parking outside the lines or failing to park within a designated space is not allowed. If roadside parking spaces are scarce, park in a parking lot instead, and remember not to violate prohibition signs.
5
2
Share

What is the valve adjustment mnemonic for a 6-cylinder engine?

The firing order is 1-5-3-6-2-4. When piston No.1 reaches top dead center (TDC), you can adjust the intake and exhaust valves of cylinder No.1, the exhaust valves of cylinders No.3 and No.5, and the intake valves of cylinders No.2 and No.4. After rotating the crankshaft one full turn, when piston No.6 reaches TDC, you can adjust the intake and exhaust valves of cylinder No.6, the intake valves of cylinders No.3 and No.5, and the exhaust valves of cylinders No.2 and No.4. Below is an introduction to valve knowledge: Composition: A valve consists of a valve head and stem. The valve head operates at extremely high temperatures (intake valve: 570~670K, exhaust valve: 1050~1200K) and withstands gas pressure, valve spring force, and inertial forces from transmission components. With poor lubrication and cooling conditions, valves must possess sufficient strength, stiffness, heat resistance, and wear resistance. Intake valves are typically made of alloy steel (chromium steel, nickel-chromium steel), while exhaust valves use heat-resistant alloys (silicon-chromium steel). To conserve heat-resistant alloys, some exhaust valves feature a heat-resistant alloy head welded to a chromium steel stem. Current Status: To improve intake and exhaust efficiency, modern engines commonly employ multi-valve technology. The most prevalent configuration is four valves per cylinder (though some designs use 3 or 5 valves per cylinder with the same principle, such as Audi A6 engines), totaling 16 valves for a 4-cylinder engine.
16
4
Share

Does Higher Turbocharger Pressure Mean More Horsepower?

Higher turbocharger pressure does result in more horsepower. Introduction to automotive turbochargers is as follows: Purpose of turbocharging: Turbocharging refers to the technology of compressing air before supplying it to the cylinders to increase air density and intake volume, aiming to enhance air charge, boost power, improve fuel economy, and reduce emissions. Classification of turbochargers: Turbochargers specifically refer to engine intake turbochargers, which come in three forms: exhaust gas turbochargers, mechanical turbochargers, and electrically assisted turbochargers. Currently, the most widely used is the engine exhaust gas turbocharger.
3
3
Share

Can a Class E License be Upgraded to a Class D License?

Yes, a Class E license can be directly upgraded to a Class D license, provided that there are no records of 12 penalty points in the previous scoring cycle. Apply at the vehicle management office or a driving school, pass the required tests (Subjects 1, 2, and 3), and then exchange for a Class D license. Fees vary by region; consult your local vehicle management office or driving school for specifics. Below are the relevant details: Class E License Vehicle Types: Two-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed exceeding 50km/h. Other permissible vehicle types include Class F. Class D License Vehicle Types: Three-wheeled motorcycles with an engine displacement exceeding 50ml or a maximum design speed exceeding 50km/h. Other permissible vehicle types include Class E and F.
2
0
Share

How many types of vehicles are classified in the factory area?

Factory area vehicles are divided into two categories, as described below: Specialized factory vehicles: Forklifts: including internal combustion counterbalanced forklifts, battery counterbalanced forklifts, internal combustion side-loading forklifts, straddle forklifts, reach forklifts, three-way stacking forklifts, pallet stackers, and explosion-proof forklifts. Tractors: including internal combustion tractors, battery tractors, and fully hydraulic tractors. Push-pull tractors: including internal combustion push-pull tractors and battery push-pull tractors. Transport vehicles: including internal combustion fixed-platform transport vehicles, battery fixed-platform transport vehicles, platform stackers, pallet trucks, and order pickers. Specialized sightseeing vehicles in the factory: Internal combustion sightseeing vehicles. Battery sightseeing vehicles.
1
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.