What is the ground clearance of the Volkswagen Lavida?

2 Answers
ElizabethLee
07/29/25 3:12am
The ground clearance of the Volkswagen Lavida when fully loaded is 110mm. The minimum ground clearance refers to the distance between the lowest protruding part of the chassis and the horizontal ground when the car is fully loaded (with the maximum allowable load). Ground clearance, also known as ride height, is a key factor affecting handling and off-road capability. Relevant information about minimum ground clearance is as follows: 1. The minimum ground clearance reflects the car's ability to pass over obstacles or uneven ground without collision. 2. The larger the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher center of gravity reduces stability; the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower center of gravity can increase stability.
Was this review help?
2
3
Share
Josh
08/12/25 7:04am
I've driven quite a few cars, and the Volkswagen Lavida has a ground clearance of about 138mm, which is quite reasonable for city driving. The ride height is neither too high nor too low, providing stable handling. When going over speed bumps or small potholes, it rarely scrapes the undercarriage. However, you need to be more cautious on rural or mountainous roads since it's much lower than an SUV. When fully loaded, the clearance can drop to around 110mm, affecting its ability to pass over obstacles, so it's best to slow down when carrying heavy loads. It's advisable to regularly check the suspension system—if it wears out and the clearance decreases, the car becomes more prone to scraping. Overall, the Lavida strikes a good balance in its class, making it reassuring for beginners to drive without constantly worrying about road conditions.
Was this review help?
18
3
Share
Expand All
More Forum Discussions

What is the model of the high beam for the Jinyi X3?

The bulb model for the Jinyi X3 high beam is H7 12V 55W halogen bulb. Introduction to Halogen Headlights: The working principle of halogen headlights is the same as that of incandescent lamps, where the tungsten filament is heated to incandescence to emit light. However, halogen headlights are an upgrade over incandescent lamps by incorporating halogen elements such as bromine and iodine. Utilizing the halogen cycle principle, they effectively reduce the wear and tear of the tungsten filament at high temperatures, resulting in higher brightness and longer lifespan compared to incandescent lamps. Introduction to Xenon Headlights: Xenon headlights, also known as 'high-intensity discharge (HID) lamps,' do not have a filament inside the bulb. Instead, they are filled with inert gases like xenon. The performance of xenon headlights is significantly influenced by the ballast. A high-quality ballast ensures quick start-up, resistance to extreme cold, and consistent brightness at low voltages. The color temperature of xenon headlights is closer to daylight, making them much brighter than halogen headlights. This provides drivers with better illumination, enhancing driving safety, while consuming only two-thirds of the energy of halogen headlights. Additionally, xenon headlights have a much longer operational lifespan.
3
5
Share

What is the engine model of the Sagitar?

The engine model of the Sagitar is the Volkswagen EA211. An engine is a machine that can convert other forms of energy into mechanical energy, including internal combustion engines, external combustion engines, jet engines, and electric motors. Taking the 2021 Sagitar Manual Fashion Smart Connect Edition as an example, it is a compact 4-door 5-seater sedan with body dimensions of 4753mm in length, 1800mm in width, and 1462mm in height, a wheelbase of 2731mm, and a fuel tank capacity of 50 liters. The 2021 Sagitar Manual Fashion Smart Connect Edition is equipped with a 1.2T turbocharged engine and a 5-speed manual transmission, with a maximum power of 85 kilowatts and a maximum torque of 175 Newton meters.
20
1
Share

How to Fix a Car Battery Warning Light?

Here are the methods to fix a car battery warning light: 1. If the yellow light is on, it indicates that the battery is low or completely dead, which may prevent the car from starting. In this case, you can use jumper cables to start the car and let it run for a while to recharge the battery. After restarting, the yellow light should disappear, and the battery will return to normal. 2. If the red light is on, it indicates not just a battery issue but a fault in the power supply system. It is recommended to turn off all electrical devices in the car and call for roadside assistance. Reasons for the battery warning light include: 1. The generator output voltage is lower than the battery voltage, the generator is not working, or there is a fault in the power supply circuit. In this case, the battery warning light will turn on. You should take the car to a repair shop to inspect the generator and charging circuit. 2. The battery warning light on the dashboard is an indicator that the generator is not charging. Normally, it lights up when the ignition is turned to the ON position and turns off after the engine starts. If the light remains on, it means the generator is not charging or there may be an issue with the wiring, requiring a visit to a service station for inspection. 3. If the car battery is low on charge, the battery warning light may also turn on. However, in this case, you can continue driving because the battery can recharge while the car is running, powered by the generator inside the engine.
2
4
Share

What Does It Mean to Sweep the Line in Reverse Parking?

Body sweeping the line means the vehicle body crosses the line, which results in a deduction of 100 points, leading to failure in the current test. Other actions that also result in a 100-point deduction include the vehicle body crossing the boundary, not entering the parking space, stopping midway, not following the designated route, not driving in the correct sequence, and exceeding the specified time limit. The two subjects have a total score of 100 points, with evaluation criteria set for failure, 20-point deduction, 10-point deduction, and 5-point deduction. The rules for the second subject of the motor vehicle driver's license test state that any of the following actions will result in failure: stopping or rolling back during the test, not following the voice prompts, the wheels crossing the line, or the vehicle body crossing the line. Many learners encounter the issue of crossing the line during the second subject training, and the most common mistake leading to failure is "crossing the line." The main reason for wheels crossing the line is that learners fail to master the correct timing for steering. Apart from missing the right timing, another reason could be that the speed of steering does not match the vehicle's speed. Second Subject Deduction Criteria: Not wearing a seatbelt: 100-point deduction. Starting the engine without the gear in neutral: 100-point deduction. Not using the turn signal (including starting, changing lanes, overtaking, turning, and parking by the roadside); turning on the turn signal for less than three seconds (note that this is easily overlooked!); forgetting to turn off the turn signal or using it incorrectly: 10-point deduction. Stalling once: 10-point deduction. Reverse Parking: Not following the designated route sequence: 100-point deduction. Vehicle body crossing the line: 100-point deduction. Not completing the reverse parking: 100-point deduction. Before reversing, if both front wheels do not pass the control line: 100-point deduction. Exceeding the 210-second time limit for the task: 100-point deduction. Stopping for more than 2 seconds midway: 5-point deduction each time. Slope Parking and Starting: After the vehicle stops, if the front bumper is not aligned with the pole line and exceeds 50 cm forward or backward: 100-point deduction. After the vehicle stops, if the front bumper is not aligned with the pole line but does not exceed 50 cm forward or backward: 10-point deduction. After the vehicle stops, if the starting time exceeds 30 seconds: 100-point deduction. Wheels touching the road edge line while driving: 100-point deduction. Rolling back more than 30 cm when starting: 100-point deduction. After the vehicle stops, if the body is more than 50 cm away from the road edge line: 100-point deduction. After parking, not tightening the parking brake: 10-point deduction each time. After the vehicle stops, if the body is more than 30 cm but less than 50 cm away from the road edge line: 10-point deduction each time. Rolling back more than 10 cm but less than 30 cm when starting: 5-point deduction each time. Parallel Parking: After the vehicle stops in the parking space, if the body crosses the line: 100-point deduction. Not using or incorrectly using the turn signal when parking: 10-point deduction. Exceeding the 90-second time limit for the task: 100-point deduction. Touching the parking space boundary line with the body while driving: 10-point deduction each time. Wheels touching the lane boundary line while driving: 10-point deduction each time. Stopping for more than 2 seconds midway: 5-point deduction each time. Right-Angle Turn: Wheels touching the road edge line: 100-point deduction. Not using or incorrectly using the turn signal when turning, or not turning off the turn signal after turning: 10-point deduction. Stopping for more than 2 seconds midway: 5-point deduction each time. Curve Driving: Wheels touching the road edge line: 100-point deduction. Stopping for more than 2 seconds midway: 100-point deduction. Not driving in second gear or above: 5-point deduction.
12
0
Share

What is the Mercedes-Benz AMG?

The Mercedes-Benz AMG is a C-segment vehicle, specifically a midsize 4-door 5-seater sedan. Its body dimensions are: length 4704mm, width 1810mm, height 1434mm, with a wheelbase of 2840mm. It features a front-engine four-wheel-drive layout and utilizes multi-link independent suspension for both front and rear. The Mercedes-Benz AMG is equipped with a 3.0T twin-turbocharged engine paired with a 9-speed automatic transmission, delivering maximum power of 287 kW at 6100 rpm and peak torque of 520 N·m between 2500-5000 rpm.
11
4
Share

Does Parking Surveillance Damage the Battery?

Parking surveillance does not damage the battery. A dashcam that is not directly powered by the car battery will not harm the battery. The functions of the battery are: 1. Providing a strong starting current to the starter when starting the engine; 2. Assisting the generator in supplying power to electrical devices; 3. Charging the battery when the generator's terminal voltage is higher than that of the battery. Steps to replace the battery: 1. Remove the battery's securing mechanism. Some batteries may have protective casings, which need to be removed first. 2. Disconnect the battery's negative terminal first. Be careful not to disconnect the positive terminal first, as this could cause a short circuit and produce sparks if the positive terminal touches the car body, which is very dangerous. 3. Disconnect the battery's positive terminal. Generally, the positive terminal has a protective device, so take care to avoid damaging it during removal. 4. Secure the battery first, then install the positive terminal, followed by the negative terminal, which is the reverse order of removal.
9
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.