···
Log in / Register

What is the ground clearance of the Trumpchi GS8?

4 Answers
SimonDella
07/29/25 6:04pm

The ground clearance of the Trumpchi GS8 is 200mm, which fully ensures the vehicle's off-road capability and passing ability. Ground clearance refers to the distance between the lowest point of the car (excluding the wheels) and the supporting plane when the car is fully loaded and stationary, used to characterize the car's ability to pass obstacles such as rocks and stumps without collision. The Trumpchi GS8 is a mid-size SUV produced by GAC Motor, with dimensions of 4835mm in length, 1910mm in width, and 1765mm in height, and a wheelbase of 2800mm. The exterior headlights of the vehicle feature a matrix-style full LED lamp group, with four LED light sources inside, providing a very refined visual effect. The taillights also have a very distinctive design, adopting a double U-shaped design that echoes the shape of the headlights, with a highly layered interior.

Was this review help?
20
1
Share
MirandaAnn
08/14/25 10:14am

I just bought a GAC GS8 and have been using it for almost half a year. According to official data, the ground clearance is 196mm when unloaded, which is about 20cm high. This is considered above average among SUVs, making it quite easy to drive on city roads and suburban dirt roads. However, when fully loaded with passengers and cargo, it can drop to around 170mm, so you need to be careful not to scrape the undercarriage. The height has many advantages, such as being less prone to water ingress during rain or snow and less likely to get stuck when going over bumps. For daily driving, especially if you frequently travel in mountainous areas, I would recommend regularly checking the tire pressure, as too low pressure can affect the actual height. Overall, it feels very safe and reliable, unlike some low-slung sedans where you constantly worry about scraping. You can also confidently take it on road trips.

Was this review help?
2
2
Share
Expand All
DeNorah
10/14/25 3:57am

I once helped a friend adjust the chassis ground clearance of a Trumpchi GS8 at a repair shop. The standard unladen ground clearance is approximately 196mm, which refers to the vertical distance from the lowest point of the undercarriage to the ground. In actual driving, factors like weight distribution, suspension condition, or aftermarket modifications can affect this measurement—for instance, a 200kg load might reduce it to around 180mm. This height is chosen to strike a balance between comfort and off-road capability, significantly outperforming typical sedans (150mm) while remaining lower than hardcore off-road vehicles. For routine maintenance, pay attention to suspension wear and tire pressure—measurements can be taken simply with a ruler. Maintaining proper clearance minimizes undercarriage damage and extends vehicle lifespan, especially when crossing speed bumps at moderate speeds.

Was this review help?
3
5
Share
Expand All
LePeyton
11/27/25 4:53am

The ground clearance of the GAC GS8 is typically around 196mm, which is practical and stable. This measurement makes it quite popular among SUVs, easily handling curbs or puddles in daily driving, though it's not designed for professional off-roading. Compared to my sedan, the extra 50mm provides more peace of mind, especially reducing the risk of water accumulation after rain. Remember, loading or driving on slopes can reduce the actual clearance, so it's advisable to visually check the cleanliness of the undercarriage before driving to avoid minor obstacles causing trouble.

Was this review help?
1
2
Share
Expand All
More Forum Discussions

How to reset the tire pressure light on a 2008 Toyota Crown?

To reset the tire pressure light on a 2008 Toyota Crown, follow these steps: Adjust the air pressure in all four tires to the same level, then locate the tire pressure switch below the steering wheel with the ignition on. Press and release the switch, then restart the vehicle. The tire pressure light may illuminate due to: 1. A punctured tire causing slow air leakage (this triggers the tire pressure monitoring system); 2. Excessive tire pressure; 3. Prolonged driving with low tire pressure. The Crown is a mid-to-large-sized sedan under the Toyota Group, with body dimensions of 5020mm (length) × 1805mm (width) × 1480mm (height) and a wheelbase of 2925mm.
12
5
Share

Is the Prado a Full-Time Four-Wheel Drive?

The Prado is not a full-time four-wheel drive. The vehicle adopts a part-time four-wheel drive system, which is a type of four-wheel drive system that allows the driver to switch between two-wheel drive and four-wheel drive modes by engaging or disengaging the transfer case according to road conditions, enabling free conversion between two-wheel drive and four-wheel drive. The Prado is an imported ORV with dimensions of 4840mm in length, 1885mm in width, and 1890mm in height, and a wheelbase of 2790mm. The vehicle utilizes technologies such as a double overhead camshaft, 24 valves, and a VVTi intelligent variable valve timing control system, delivering a maximum power of 179 kilowatts and a maximum torque of 376 Newton-meters.
13
2
Share

What stickers are required for new vehicle registration?

New vehicles require the following stickers for registration: Motor Vehicle Inspection Compliance Sticker, Compulsory Insurance Sticker, Environmental Protection Inspection Compliance Sticker, Compulsory Insurance Sticker, Annual Inspection Sticker, and Environmental Protection Sticker. The Motor Vehicle Inspection Compliance Sticker is issued by traffic authorities after the vehicle passes regular safety technical inspections. National regulations mandate that vehicles must undergo periodic inspections, including emissions testing, exterior inspection, lighting inspection, brake inspection, chassis inspection, and must have no traffic violation records before the compliance sticker can be issued. Both the Compulsory Insurance policy and its sticker bear the inscription 'Supervised by China Insurance Regulatory Commission'. The policy document is brown, with main text printed using internationally advanced red fluorescent anti-counterfeit ink, and the underline consists of microprinted text for enhanced security features.
1
3
Share

What causes the Kia K5 to shake when starting?

Reasons for the Kia K5 shaking when starting: 1. If slight shaking or deviation of the car body is noticed during driving, it is usually caused by tire issues; 2. Another more severe condition might be due to deformed wheel rims, which requires inspection at a professional repair shop; 3. Unbalanced deformation of the drive shaft, a condition more common in vehicles that have experienced chassis collisions. The dimensions of the Dongfeng Yueda Kia K5 are 4845mm in length, 1830mm in width, and 1460mm in height, with a wheelbase of 2795mm. The 2.0L model of this car features a single exhaust design, while the 2.4L model adopts a symmetrical dual exhaust setup.
9
5
Share

What is the original engine oil specification for the ix35?

The original engine oil specification for the ix35 is 5W20. The smaller the number before the W, the lower the viscosity, indicating better low-temperature fluidity and suitability for colder climates. The larger the number after the W, the higher the viscosity, ensuring more stable protection under high-temperature conditions. When using engine oil, it is essential to ensure the oil grade is correct and the oil is genuine, as counterfeit or substandard oil can damage the engine. The ix35 is a compact SUV with body dimensions of 4435mm in length, 1850mm in width, and 1680mm in height, with a wheelbase of 2640mm. This model offers two powertrain options: a 1.4T turbocharged engine and a 2.0L naturally aspirated engine.
2
1
Share

How to Replace a Car Remote Control Battery?

Car remote control battery replacement method is: 1. Prepare a flat-head screwdriver to pry open the key cover along the gap; 2. After prying open the outer cover, you will see there is another protective cover inside that needs to have its screws removed; 3. Use a Phillips screwdriver to remove the screws, then you can open the inner cover; 4. After opening the cover, there are two parts inside - one part is the battery. Remove the old battery and replace it with a new one, ensuring the positive side faces upwards. When using a flat-head screwdriver to replace the car key battery, avoid applying excessive force as it may damage the car remote or your fingers. The car remote key utilizes the wireless remote control function of the central locking system, allowing you to remotely unlock and lock doors without inserting the key into the keyhole.
11
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.