What is the ground clearance of the Toyota RAV4?

How often should the catalytic converter be replaced?

The catalytic converter should be replaced every 30,000 kilometers of driving, or as specified in the vehicle's maintenance manual. The catalytic converter is installed at the front section of the exhaust pipe, with an oxygen sensor positioned before and after it. The front oxygen sensor primarily measures the oxygen content in the exhaust and sends this data to the ECU (Engine Control Unit), which then adjusts the air-fuel ratio of the engine accordingly. The rear oxygen sensor checks whether the catalytic converter is functioning properly. If the data from both oxygen sensors sent to the ECU are similar, it indicates that the catalytic converter has failed, and a warning light will illuminate on the dashboard.

7

0

Share

What Causes the Steering Wheel to Be Misaligned After a Wheel Alignment?

Reasons for the steering wheel being misaligned after a wheel alignment: 1. Excessive wear of the steering gear; 2. Excessive clearance in the steering tie rod; 3. The tie rod is offset to one side; 4. Changes in the wheel alignment values; 5. Uneven wear of the front tire treads; 6. Uneven tire pressure on both sides. Functions of wheel alignment: 1. Keeps the car driving straight stably and makes steering easier; 2. Ensures the steering wheels can automatically return to the correct position after turning; 3. Reduces wear on tires and steering components during driving; 4. Maintains the optimal driving angle between the tires and the car body, improving grip while ensuring comfort.

4

5

Share

Has the Acura RDX been domestically produced?

The Acura RDX has been domestically produced. This vehicle is a five-door, five-seater SUV under the Acura brand. Its body dimensions are: Length: 4752mm, Width: 1926mm, Height: 1668mm, with a wheelbase of 2750mm. The front suspension of the Acura RDX is a MacPherson independent suspension, and the rear suspension is a multi-link independent suspension. The Acura RDX is equipped with a 2.0-liter turbocharged engine, delivering a maximum torque of 265 horsepower and 380 Nm. The maximum power speed is 6500 rpm, and the maximum torque speed ranges from 3000 to 4000 rpm. This engine features VTEC technology and direct fuel injection, with an aluminum alloy cylinder head and block.

18

2

Share

How often should the spark plugs be replaced in a Tiida?

Tiida's spark plugs should be replaced every 32,500 kilometers or 39 months. As spark plugs are consumable parts, they need to be replaced even if the mileage is reached before the time interval. Failing to replace spark plugs for an extended period will affect the vehicle's ignition performance, and prolonged use can lead to carbon buildup. The Tiida is a compact car under Dongfeng, featuring a 5-door, 5-seat hatchback body structure. Its dimensions are 4393mm in length, 1766mm in width, and 1539mm in height, with a wheelbase of 2700mm. It is equipped with a 4-cylinder, 1.6-liter, 122-horsepower naturally aspirated engine. The front suspension uses a MacPherson strut independent suspension, while the rear suspension employs a torsion beam non-independent suspension.

19

3

Share

Why can't the car window be fully rolled down?

There are several reasons why a car window cannot be fully rolled down: 1. The window lift motor is damaged or there is poor contact in the electrical control wiring harness; 2. Motor overheating protection is activated; 3. Excessive resistance in the glass guide channel; 4. Loss of computer data. The car window is an essential part of the vehicle body, designed to meet the needs of interior lighting, ventilation, and visibility for drivers and passengers. Depending on the installation position of the glass, windows are categorized into front and rear windshields, side windows, and door windows. The window structure is typically a curved, sealed design, with rubber sealing strips connecting the window frame and the glass to provide sealing and cushioning, preventing damage to the windshield when the window frame deforms due to stress on the vehicle body.

1

5

Share

What is the normal idle speed for the Changan CS55?

Changan CS55's normal idle speed ranges between 600 to 850 RPM. Idle speed refers to the engine operating without any load, only overcoming the internal friction resistance of its components, without delivering any external power output. The minimum speed required to maintain stable engine operation is known as idle speed, which is one of the fundamental operating conditions of an engine. Idle condition means the engine is running without any load. The Changan CS55 is an SUV model launched by Changan Automobile, with a body length of 4500mm, width of 1855mm, height of 1690mm, and a wheelbase of 2650mm. The vehicle is equipped with Changan's H-series engine, the BlueCore 1.5T VVT DOHC all-aluminum engine, delivering a maximum power of 115kW and a maximum torque of 225Nm.

2

0

Share

What is the ground clearance of the Toyota RAV4?

How often should the catalytic converter be replaced?

What Causes the Steering Wheel to Be Misaligned After a Wheel Alignment?

Has the Acura RDX been domestically produced?

How often should the spark plugs be replaced in a Tiida?

Why can't the car window be fully rolled down?

What is the normal idle speed for the Changan CS55?

How much fuel is consumed by idling with the air conditioning on for one hour?

What to Do When Encountering a Test Car with Difficult Gear Shifting?

Does the Charcoal Canister Need Regular Replacement?

What is letin car?