What is the ground clearance of the Toyota Levin?

1 Answers
EvangelineRose
07/30/25 6:11am
Toyota Levin's minimum ground clearance is 105 millimeters. The minimum ground clearance of the Levin refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the Levin's ground clearance, the better its off-road capability; however, if the ground clearance is too high, the stability at high speeds will decrease. On January 4, 2021, Toyota officially launched the 2021 Levin family, which includes six pure gasoline-powered models. The Levin's dimensions are 4640 mm in length, 1780 mm in width, and 1455 mm in height, with a wheelbase of 2700 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Levin's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Levin's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the chassis.
Was this review help?
2
4
Share
More Forum Discussions

Is the ABC Warning Light Serious?

Yellow warning indicates a serious problem with the car, requiring immediate repair at a 4S shop or repair facility. Red warning signifies a severe fault in the alerted area, necessitating immediate attention. In some cases, towing for repair may be required, depending on the specific fault indicated by the warning light. Generally, the illumination of a warning light is a relatively common issue and not particularly severe. After the warning light comes on, the vehicle can still be driven, but the system becomes non-functional, causing the wheels to lock up during emergency braking. Therefore, it is crucial to drive cautiously and avoid sudden braking once the light is on. If the wheels lock up, the driver loses control of the steering, and the car may slide forward or to one side, posing a hazard. However, in actual driving, situations requiring emergency braking are rare, so driving slowly on icy or snowy roads is essential. Since emergency braking is unnecessary on such surfaces, normal braking can often cause wheel lock-up. Car owners in northern regions should take note: if the warning light comes on during winter, prompt repair and careful driving are advised. The ABC warning light indicates a fault in the Automatic Stability and Traction Control System. Indicator lights can be categorized into three types: status indicators, warning lights, and fault lights. The dashboard uses green, yellow, and red colors to denote varying levels of danger: red for critical alerts, yellow for fault indications, and green for status indicators. Common dashboard indicator lights include: engine fault light, oil pressure fault light, ABS fault light, anti-skid fault light, battery fault light, steering gear fault light, and brake pad wear warning light. Here is an introduction to the ABC warning light in cars: ABC stands for Active Body Control, an advanced active suspension system. The Body Stability Control System, developed by Toyota, is an active safety feature that significantly enhances vehicle handling safety and driving convenience.
20
2
Share

How to Switch Driving Modes on the Changan CS55 Blue Whale Edition?

To switch driving modes on the Changan CS55 Blue Whale Edition, simply locate the corresponding mode switch button. The Changan CS55 Blue Whale offers two driving modes: 1. Economy Mode: This mode is engaged by shifting into the S gear. 2. Sport Mode: Sport mode is also the S gear. Here are some details about the Changan CS55 Blue Whale Edition: 1. Powertrain: Equipped with the Changan Blue Whale NE series 1.5T high-pressure direct injection engine, delivering a maximum power of 132kW and a maximum torque of 300N.m. 2. Body Dimensions: The length, width, and height are 4500/1860/1690mm respectively, with a wheelbase of 2650mm.
17
2
Share

What is the passing score for C1 license?

For subjects 1 and 4, the passing score is 90 points, while for subjects 2 and 3, it is 80 points. Below are the precautions for the four subjects: 1. Subject 1: Subject 1 is a theoretical test, make sure to check your ID card before the exam. 2. Subject 2: Subject 2 is an in-car test, after getting in the car, first adjust the seat and mirrors, and fasten the seatbelt. 3. Subject 3: After completing all parts of Subject 3, make sure to shift into neutral and engage the handbrake when parking. 4. Subject 4: Subject 4 includes multiple-choice questions, be careful not to mistake multiple-choice questions for single-choice questions, and read the question requirements clearly.
7
2
Share

What does duplicate vehicle identification number mean?

Vehicle identification number refers to the vehicle model and factory serial number, which should be printed on easily visible and traceable parts of the vehicle frame or body as per regulations. The specific printing location should be indicated in the product manual for easy reference. Relevant introductions are as follows: 1. Taking passenger car series as an example: The first three digits of the identification code are determined by three standards - production country, manufacturer, and vehicle type. 2. Relevant code representations: LFW refers to trucks, LFP refers to passenger cars, LFB refers to buses, LFN refers to incomplete vehicles, LFD refers to spare parts, LFS refers to special vehicles, LFT refers to trailers, LFM refers to multi-purpose passenger vehicles, LFV refers to vehicles produced by FAW-Volkswagen.
11
2
Share

Can I drive a semi-trailer with a newly obtained A2 license?

No, you cannot drive a semi-trailer with a newly obtained A2 license. You must complete the probationary period before you are allowed to drive a semi-trailer on the road. The first 12 months after obtaining an A2 driver's license are considered the probationary period for the A2 license. According to relevant laws and regulations, an A2 driver's license holder is not permitted to tow a trailer during the probationary period. In other words, you cannot drive a semi-trailer on the road immediately after obtaining an A2 license. Special provisions for driving trailers specify that during the probationary period, the motor vehicle driven must not tow a trailer. Simply put, within one year of obtaining an A2 license (after adding the A2 class), you are not allowed to drive a towing trailer. Although the A2 license corresponds to the permitted vehicle types of tractors and B1, B2, which include semi-trailers, according to the regulations, towing a trailer is prohibited during the probationary period. Therefore, an A2 license holder cannot drive a semi-trailer during the probationary period. Relevant laws and regulations specify the probationary period for driver's licenses in the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses." The probationary period is defined as follows: The first 12 months after a motor vehicle driver initially applies for a driver's license or adds a permitted vehicle class is the probationary period. In other words, starting from the initial issuance date recorded on the driver's license, the following 12 months (one year) constitute the probationary period for the driver's license.
8
4
Share

Why Are Concept Cars Not Mass-Produced?

Here is a detailed introduction to the reasons why concept cars are not mass-produced: 1. Excessively high technical requirements: Concept cars combine cool appearances and intelligent high-tech configurations, reflecting the automotive company's vision and expectations for future car development trends. 2. Difficulty in passing tests: Many concept cars are only for display purposes and do not have practical functions. 3. Solely for showcasing brand philosophy: Automakers introduce concept cars more to convey the brand's car-making philosophy rather than actually producing them. By presenting perfect craftsmanship to consumers, automakers create a favorable impression of the models, which helps enhance the brand image.
20
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.