What is the ground clearance of the Toyota Corolla?

1 Answers
VanAshley
07/29/25 12:26pm
Toyota Corolla has a minimum ground clearance of 145mm when unloaded and 105mm when fully loaded. The smaller the ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but it also results in a lower center of gravity. The Corolla is a classic model under the Toyota brand. Below is an introduction to the Corolla: 1. In terms of exterior design, the Corolla features a honeycomb-style front grille, giving it a sporty look. The emblem area and the side grilles adopt a through-type design, which not only enhances the sense of refinement but also improves the overall unity of the front face. 2. For the interior, it comes with a three-spoke steering wheel and a digital instrument cluster, along with a floating central control screen that supports navigation. Below the central control screen are the air conditioning controls, which use rotary knobs for easy operation by the driver. 3. In terms of powertrain, the Corolla is equipped with a 1.6L engine, delivering a maximum power of 122Ps and a maximum torque of 154N•m, paired with a CVT transmission.
Was this review help?
1
4
Share
More Forum Discussions

What are the drawbacks of a 6-piston front and 4-piston rear brake setup?

There are no drawbacks. The numbers 6 and 4 in '6-piston front and 4-piston rear' refer to the number of pistons. Below is relevant information about brake discs: 1. Introduction: A brake disc, simply put, is a round disc. The brake caliper clamps onto the brake disc to generate braking force. When you press the brake pedal, the brake disc is clamped to slow down or stop the vehicle. Brake discs offer excellent braking performance and are easier to maintain compared to drum brakes. 2. Structure: Disc brake rotors are divided into solid discs (single-piece discs) and vented discs (two-piece discs). Solid discs are straightforward—they are solid. Vented discs, as the name suggests, have ventilation properties. Externally, vented discs have numerous holes around the circumference leading to the center, known as vents.
5
3
Share

Is the Xingyue L equipped with Volvo's three major components?

The Xingyue L does feature Volvo's three major components. Here are the relevant details: 1. Body dimensions: The new vehicle measures 4770×1895×1689mm in length, width, and height, with a wheelbase of 2845mm. Previous information from the Ministry of Industry and Information Technology indicates that the Xingyue L will be equipped with high and low power versions of a 2.0T engine. Additionally, the manufacturer has stated that the Xingyue L may feature Geely's latest digital intelligent cockpit system and higher-level autonomous driving technology. 2. Power parameters: The Xingyue L is equipped with a 2.0TD engine available in medium and high power versions, with maximum power outputs of 160kW (218 horsepower) and 175kW (238 horsepower), and peak torques of 325Nm and 350Nm, respectively. For transmission, it is paired with a 7-speed wet dual-clutch transmission (DCT) and an Aisin 8AT transmission.
16
0
Share

Why does the Leopaard CS10 make a clunking noise on bumpy roads?

Possible reasons include leakage or bending of the shock absorber itself, which can be resolved by direct replacement. More information about the Leopaard CS10 is as follows: 1. Overview: The Leopaard CS10 is the flagship model of Leopaard Motors in the urban SUV segment. With its military-industrial background and solid chassis technology, this model has become synonymous with safety, reliability, and durability, targeting young urban professionals who have achieved some success in their careers. It is a new choice for the new generation of consumers in the compact SUV segment. The Leopaard CS10 features high aesthetics, excellent off-road capability, a spacious interior, and high-end configurations. The currently available models are equipped with a 2.0T engine and come in up to ten different configurations. 2. Model: In terms of appearance, the mass-produced CVT version is consistent with the currently available models. The car's grille is divided into three parts, giving it a very layered look. The headlights feature a crystal diamond design, with the low beam equipped with a lens and using halogen light sources. The daytime running lights are integrated into the headlight assembly. The CVT badge on the rear indicates the transmission type. The interior is also consistent with the currently available models.
11
1
Share

What are the reasons for Audi's braking system failure preventing the car from starting?

Audi braking system failure preventing the car from starting may be due to: 1. Lack of fuel: Forgetting to refuel, resulting in fuel depletion. 2. Battery depletion: New energy electric vehicles may experience battery depletion. 3. Incorrect gear position: Brake shoes contaminated with oil or poor contact, aging friction pads, wear, uneven wear of brake drums, and other braking technical conditions. Adjustment and repair may be necessary when required. Additional information: A car with good braking performance should be able to reduce speed or stop promptly within a short time and distance through braking measures at any speed. Good braking efficiency plays a crucial role in improving the average speed of the car and ensuring driving safety.
11
4
Share

What does 2.8t mean?

2.8T refers to a 2.8-liter displacement engine equipped with an intake turbocharger. Below is the relevant introduction: 1. The meaning of t: T stands for turbocharging, which is an engine with an intake turbocharging device. The turbocharging device can change the air intake of the engine, allowing the fuel to burn more fully in the cylinder, thereby increasing the engine's output power. 2. The meaning of l: L stands for liter displacement, for example, 2.8L means the engine has a 2.4-liter displacement. Although naturally aspirated engines have relatively linear power output, the overall power delivery point is later, and the maximum torque is often achieved at around 4000 rpm.
18
1
Share

What is the Difference Between Passenger Vehicles and Private Cars?

Passenger vehicles and private cars differ as follows: 1. Private Cars: Private cars belong to the category of small passenger vehicles. Small passenger vehicles generally refer to compact vehicles designed to carry people, specifically small buses with a seating capacity of 2 to 9 passengers. These typically include sports cars, sedans, and microvans. Due to their compact size, they are highly suitable for family and organizational use. They are generally distinguished from medium and large buses. The advantages of microcars are their affordable price, convenient maintenance, and lower fuel consumption. However, they are fast and have relatively weak front structures and thin chassis, so it is recommended to install bumpers or airbags. Typically, speed limits for small passenger vehicles differ from those of other vehicles in areas with speed limit signs. 2. Passenger Vehicles: Medium-sized buses refer to passenger vehicles with a seating capacity greater than 9 but less than 20, as indicated in the vehicle announcement, and their license plates are yellow in color.
14
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.