What is the ground clearance of the Toyota Camry?

1 Answers
OCassandra
07/29/25 4:57pm
The ground clearance of the Toyota Camry ranges between 155 cm and 159 cm. Ground clearance, also known as minimum ground clearance, refers to the distance between the lowest protruding part of the vehicle's undercarriage and a level ground surface when the car is fully loaded (at maximum allowable payload). This measurement reflects the vehicle's ability to pass over obstacles or uneven terrain without collision. The Toyota Camry is a mid-size sedan under GAC Toyota, with dimensions of 4885 mm in length, 1840 mm in width, and 1455 mm in height. It has a wheelbase of 2825 mm, with front and rear track widths of 1595 mm and 1605 mm respectively. The Toyota Camry is equipped with a 2.0L naturally aspirated engine, delivering a maximum power output of 131 kW and a peak torque of 210 Nm.
Was this review help?
7
0
Share
More Forum Discussions

What are the main causes of the abnormal noise in the Atenza?

The sunroof drain pipe is located in the B-pillar, and if the fixing clip cannot secure or fails to hold the drain pipe in place, it will produce abnormal noise during driving. Below are the specific details: 1. Replacing the clip: The drain pipe fixing clip needs to be re-secured. The interior components on the B-pillar are fixed in position using clips and fixing components. When the fixing clip lacks sufficient tension or is missing, it will cause abnormal noise. This requires replacing the clip to resolve the issue. 2. Interior components: For two adjacent interior components on the B-pillar, when driving or on bumpy roads, displacement of the parts and material properties can lead to abnormal noise. Generally, this can only be resolved by securing the parts, applying noise-proofing treatments, or replacing the components.
14
0
Share

What is the wading depth of the Baojun e100?

The maximum wading depth of the Baojun e100 is 130mm. The wading depth of the Baojun e100 is determined by the height of the vehicle's chassis, which corresponds to the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact and small vehicles with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Baojun e100 is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can be increased by installing a snorkel. If wading is unavoidable, the following safe and correct procedures should be followed: Before driving through water, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in the water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow their tracks at a low speed, avoiding sudden acceleration or deceleration. For roads prone to flooding, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route instead.
2
5
Share

What does minijcw mean?

minijcw refers to the high-performance version. Taking the 2021 minijcw as an example, its body dimensions are: length 3874mm, width 1727mm, height 1452mm, with a wheelbase of 2495mm. The body structure is a 3-door, 4-seat hatchback. The 2021 minijcw is equipped with a 2.0T turbocharged engine, delivering a maximum power of 170kW and a maximum torque of 320Nm, paired with an 8-speed automatic manual transmission. It features a front suspension type of MacPherson independent suspension and a rear suspension type of multi-link independent suspension.
11
0
Share

What car has a horse in the middle of the steering wheel?

The car with a horse in the middle of the steering wheel is the Baojun automobile. Baojun is an independent automotive brand created by SAIC-GM-Wuling. Taking the 2021 Baojun 530 as an example, it is a 5-door, 5-seat compact SUV with a body length, width, and height of 4690 mm, 1835 mm, and 1750 mm respectively, a wheelbase of 2750 mm, and a fuel tank capacity of 52 liters. The 2021 Baojun 530 is equipped with a 1.5T turbocharged engine, delivering a maximum torque of 250 Nm, a maximum power speed of 5200 rpm, and a maximum torque speed ranging from 2200 to 3400 rpm. It is paired with a 6-speed manual transmission.
8
2
Share

How to Set the One-Touch Power Window for Nissan Sylphy?

The method to set the one-touch power window for Nissan Sylphy is as follows: 1. Lower the driver's side window; 2. Turn off the ignition switch and then turn it back to the ON position; 3. Pull up the window switch; 4. Hold the window switch for 5 to 10 seconds after the window is fully raised; 5. Turn off the ignition switch and wait for 10 seconds to complete the setup. The Nissan Sylphy has a body size of 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm. Its minimum ground clearance is 166mm, fuel tank capacity is 50 liters, trunk capacity is 510 liters, and it features a 4-door, 5-seater sedan body structure.
12
2
Share

What do the letters on an automatic transmission gear shift represent?

Automatic transmission gear shift letters represent the following: 1. P stands for Park, used for long-term parking; 2. R stands for Reverse, used when backing up; 3. N stands for Neutral, used for short stops; 4. D stands for Drive, used for normal forward movement; 5. L stands for Low gear, used when going downhill or uphill; 6. S stands for Sport mode, providing stronger power when overtaking; 7. M stands for Manual mode, allowing drivers to shift gears manually. Automatic transmissions eliminate the need for manual gear shifting by automatically selecting the appropriate gear based on driving speed and traffic conditions.
20
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.