What is the ground clearance of the Toyota Camry?
3 Answers
The minimum ground clearance of the Toyota Camry is 130 millimeters. The minimum ground clearance of the Toyota Camry refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Toyota Camry, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Toyota Camry is a mid-size sedan under GAC Toyota, meeting the China VI emission standards. The dimensions of the Toyota Camry Sport Edition are 4900 mm in length, 1840 mm in width, and 1455 mm in height, with a wheelbase of 2825 mm. The dimensions of other versions are 4855 mm in length, 1840 mm in width, and 1455 mm in height, with the same wheelbase of 2825 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the ground clearance of the Toyota Camry is not static and depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's intended use and road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. For frequent travel to remote areas or driving on rough terrain, a vehicle with higher ground clearance is advisable to avoid underbody scratches or damage. The minimum ground clearance of the Toyota Camry is 130 millimeters. The minimum ground clearance of the Toyota Camry refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Toyota Camry, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease.
I've been driving a Camry for almost three years, and people often ask about the ground clearance. The official data shows about 155mm when unloaded, which is roughly the height of a regular iPhone. This height is above average among sedans, even slightly higher than the Accord. It handles speed bumps quite steadily, and occasional rural dirt roads are fine as long as there aren't big potholes – the chassis rarely scrapes. Installing an engine guard makes it even more worry-free. However, you still need to be cautious when driving through deep water in rainy weather; if it's over half the tire height, it's better to take a detour. When I bought the car, I specifically measured the showroom model with a ruler – the front bumper's lowest point is 22cm from the ground, which is the most protruding part and determines the actual passing ability.
As a car parameter enthusiast, I've studied the ground clearance of various generations of the Camry. The current TNGA architecture models have a uniform 155mm, while older models are about 10mm lower. This height, combined with the MacPherson suspension, results in minimal weight transfer during cornering. Actual measurements show that under full load, it drops to 130mm, so extra caution is needed when driving on rough roads with passengers. Compared to its peers, the Accord has 149mm and the Teana 150mm, giving the Camry a slight advantage in terms of passability. Modifying the suspension is not recommended as it may disrupt the factory-tuned handling balance. The lower control arm of the front suspension is the lowest point, making it the first part to be damaged in case of undercarriage scraping.
