What is the ground clearance of the Toyota Camry?

Where is the cabin air filter located in the Chevrolet Epica?

The cabin air filter in the Chevrolet Epica is located behind the glove compartment on the front passenger side. You can see it by opening the glove compartment. To replace the cabin air filter, you need to remove the glove compartment on the passenger side, and then open the cover to access the filter. Before replacement, check the model number of the cabin air filter being used. The Chevrolet Epica is a mid-size car introduced by SAIC-GM Chevrolet, with dimensions of 4808mm in length, 1807mm in width, and 1450mm in height, and a wheelbase of 2700mm. It is equipped with a 1.8L naturally aspirated engine, delivering a maximum power of 105kW, and is paired with either a 6-speed automatic or a 5-speed manual transmission.

11

0

Share

What type of engine oil is suitable for Mazda CX5?

Mazda CX5 uses 0W20 or 5W30 engine oil. Here, 0 represents resistance to external low temperatures of -35°C, 5 indicates resistance to external low temperatures of -30°C, W stands for winter suitability, 20 denotes a kinematic viscosity standard of 20 at 100°C, and 30 represents a kinematic viscosity standard of 30 at 100°C. The Mazda CX5 is a compact SUV introduced by Changan Mazda, with dimensions of 4555mm in length, 1842mm in width, and 1685mm in height, and a wheelbase of 2700mm. It is equipped with 2.0L and 2.5L naturally aspirated engines, paired with a 6-speed automatic transmission.

13

2

Share

What brand is the Exeed LX?

Exeed LX is a compact SUV under the Exeed brand, which is a premium brand owned by Chery, positioned above the Arrizo and Tiggo series. Similar to WEY under Great Wall and Lynk & Co under Geely, Exeed primarily targets the mid-to-high-end and overseas markets. The Exeed LX is the second model in the Exeed brand lineup, with dimensions of 4533mm in length, 1848mm in width, and 1699mm in height, and a wheelbase of 2670mm. The Exeed LX exclusively features direct fuel injection and front-wheel drive. In terms of suspension, the vehicle is equipped with a MacPherson strut front suspension and a multi-link independent rear suspension.

12

2

Share

What are the hazards of transmission shaft oil seal leakage?

The hazards of transmission shaft oil seal leakage include: 1. Reduced lifespan of the transmission shaft; 2. Increased failure rate due to transmission shaft issues. The transmission shaft is a high-speed rotating body with minimal support, making dynamic balance crucial. Generally, transmission shafts undergo dynamic balance testing before leaving the factory and are adjusted on a balancing machine. The transmission shaft is a vital component in the vehicle's drivetrain for transmitting power, working together with the gearbox and drive axle to transfer the engine's power to the wheels, generating driving force for the vehicle. The transmission shaft consists of an axle tube, telescopic sleeve, and universal joint. The telescopic sleeve automatically adjusts for distance variations between the transmission and drive axle, while the universal joint ensures changes in the angle between the gearbox output shaft and drive axle input shaft, achieving constant angular velocity transmission between the two shafts.

19

1

Share

What is the front axle structure of a car?

The front axle structure of a car consists of: front axle, kingpin, steering knuckle, brake assembly, wheel hub assembly, steering arm, and tie rod assembly. The front axle is a device that transmits various directional forces between the frame and the front wheels, as well as the resulting bending moments and torques. It is connected to the steering system via the steering knuckle, allowing the steering force output by the steering gear to be transmitted to the wheels to achieve vehicle steering. The front axle of a car not only supports the sprung mass of the front part of the vehicle and bears vertical loads but also withstands various longitudinal forces, lateral forces, and related moments. The front axle of a car can be categorized by brake type into drum brakes and disc brakes, and by brake system into air brakes and hydraulic brakes (single-leading-shoe and duo-servo types). The axle load ranges from 0.5 to 7.5 tons for micro trucks, light trucks, medium trucks, and heavy trucks.

4

Share

What type of engine oil should be used for Jetta?

Jetta should use 5W40 or higher grade engine oil. Here, 5 represents the oil's resistance to external low temperatures down to -30°C, W indicates winter suitability, and 40 denotes a kinematic viscosity standard of 40 at 100°C. Engine oil, also known as motor lubricant, serves multiple functions for the engine including lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption. Jetta is an automobile brand under FAW-Volkswagen Automotive Co., Ltd., a joint venture of German Volkswagen Group in China. Taking the Jetta VS7 as an example: it is a mid-size SUV with dimensions of 4624mm in length, 1841mm in width, and 1644mm in height, featuring a wheelbase of 2730mm. It is equipped with a 1.4T turbocharged engine paired with either a 5-speed manual or 6-speed automatic transmission.

5

2

Share

What is the ground clearance of the Toyota Camry?

Where is the cabin air filter located in the Chevrolet Epica?

What type of engine oil is suitable for Mazda CX5?

What brand is the Exeed LX?

What are the hazards of transmission shaft oil seal leakage?

What is the front axle structure of a car?

What type of engine oil should be used for Jetta?

What are the symptoms of a damaged flywheel?

How to prevent the car from veering off for novice drivers?

What is the 0-100 km/h acceleration time of the Mercedes-Benz E300?

What is the black plastic panel under the front bumper?