What is the ground clearance of the Tang DMI?

What does SS mean on the dashboard?

SS on the dashboard stands for Auto Start-Stop. When this light is on, it indicates that the car's auto start-stop function is activated. If you do not need to use this function, you can press the auto start-stop button to turn it off. Auto Start-Stop refers to a system where the engine automatically shuts off during temporary stops, such as waiting at a traffic light, and restarts when the car begins to move again. When you need to continue driving, the system automatically restarts the engine. This is achieved by equipping the traditional engine with an enhanced motor that has idle start-stop functionality, allowing the engine to completely shut off when the conditions for idle stopping are met.

1

Share

Where is the central locking control box located in the Lechi?

The central locking control box of the Lechi is located under the steering wheel. Here are the specific details about the Baojun Lechi: 1. Vehicle positioning: The Baojun Lechi is positioned as a compact car. It has a length, width, and height of 3495/1495/1523mm, with a wheelbase of 2340mm. 2. Powertrain: The Lechi is equipped with a P-TEC engine from the General Motors small car platform, delivering a maximum power of 63/6000 KW/rpm and a maximum torque of 108/4000 N·m/rpm. It comes with a five-speed manual transmission, and the average fuel consumption is 6.35L/100km.

8

1

Share

What are the symptoms of a faulty steering column?

Symptoms of a faulty steering column: The vehicle becomes difficult to control, and steering tends to deviate or drift easily. Function of the automobile steering column: The steering column and steering shaft at the front of the car move toward the driver's chest under the force of a collision, while the driver, affected by inertia, moves toward the steering wheel. Part of the energy is absorbed by the restraint system. A well-designed automotive steering system should minimize the driver's injuries during a collision. The application of an energy-absorbing steering column plays a significant role in absorbing energy in the automotive steering system. The function of the energy-absorbing steering column during a collision reduces the rearward displacement of the steering wheel during a frontal collision, decreases the severity of secondary injuries to occupants, and enhances the passive safety performance of the vehicle.

5

0

Share

What does it mean when the PS warning light appears on the Crown dashboard?

It may indicate a malfunction in the power steering ECU assembly. Below is relevant information about the ECU: 1. Description: Originally developed as an electronic device to coordinate the operation of various components in internal combustion engines. In the early stages of automotive development, the simplest ECU modules only controlled the fuel injection quantity per engine cycle. More advanced engine controllers installed in modern vehicles have become more intelligent and multi-threaded. Modern ECUs can control fuel injection ratio, air intake volume, ignition timing, ignition angle, and variable valve timing (VVT). 2. Common causes of damage: During frame welding repairs when the ECU wiring connections are not disconnected. During frame welding repairs, current variations can generate extremely high induced electromotive force, which can harm the ECU through the wiring.

18

3

Share

Where is the electronic parking brake control module of the Geely Boyue located?

It is generally installed in the fuse box within the engine compartment. Below are specific details about the electronic parking brake: 1. Principle: The working principle of the electronic parking brake is similar to that of the mechanical handbrake. Both essentially achieve the purpose of parking and braking the vehicle by creating friction between the brake disc and brake pads, with the only difference being that the traditional mechanical handbrake lever has been replaced by an electronic button. 2. Function: The electronic parking brake achieves the vehicle's parking brake through electronic control. Additionally, it extends to the vehicle's auto-hold function, allowing the driver to avoid prolonged braking when the vehicle is parked, effectively preventing the vehicle from rolling.

9

1

Share

Is it okay to press the throttle and clutch together?

It is not advisable to press the throttle and clutch together. Pressing the clutch is equivalent to shifting into neutral, where the engine is disconnected from the transmission. As a result, pressing the throttle will not be effective, and it is recommended not to operate this way during normal driving. The clutch is fixed to the engine's flywheel and is part of the car's transmission system. It can connect or disconnect the engine from the transmission. When the driver presses the clutch pedal, the clutch disengages, and releasing the pedal reconnects it. The clutch disc is a wear-prone component that requires regular replacement. As the car's mileage increases, the clutch disc will gradually wear out and need replacement once it reaches a certain level of wear. If the clutch disc is not replaced for an extended period, it may lead to clutch slippage.

3

5

Share

What is the ground clearance of the Tang DMI?

What does SS mean on the dashboard?

Where is the central locking control box located in the Lechi?

What are the symptoms of a faulty steering column?

What does it mean when the PS warning light appears on the Crown dashboard?

Where is the electronic parking brake control module of the Geely Boyue located?

Is it okay to press the throttle and clutch together?

What type of engine oil should be used for the Baojun 510?

What are China III, China IV, and China V?

Lynk & Co Rearview Mirror Auto-Tilt Adjustment

What Causes the Transmission Noise in a Corolla?