What is the ground clearance of the TACQUA?

1 Answers
DiLeila
07/29/25 12:31pm
The minimum ground clearance of the FAW-Volkswagen TACQUA, a compact SUV, is 196mm. Here are some details about minimum ground clearance: 1. Definition: Minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and stumps without collision. 2. Impact on driving: The greater the minimum ground clearance, the stronger the vehicle's ability to pass over obstacles or uneven ground, but the higher the center of gravity, which reduces stability. Conversely, the smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven ground, but the lower the center of gravity, which can increase stability.
Was this review help?
13
4
Share
More Forum Discussions

What is the EC6?

EC6 is a mid-size SUV under the NIO brand. Below are the relevant details about the NIO EC6: 1. Exterior: In terms of appearance, the NIO EC6 adopts the brand's family design language, giving it a high level of recognition. For example, the front end features a familiar design layout, with a flat and clean engine hood paired with slim LED daytime running lights on both sides, creating a refined and minimalist look. The grille area employs a hollowed-out design, complemented by slender grilles and recessed headlight zones on both sides, delivering a fashionable and three-dimensional feel with high recognition. 2. Powertrain: In terms of powertrain configuration, the NIO EC6 is equipped with dual-motor drive across all variants, but the power output is divided into two versions depending on the model. The base model offers a power output of 320kW/610N·m, while the mid-to-high trim versions deliver 400kW/725N·m.
19
2
Share

What car has five dots as its logo?

The five-star logo represents Venucia (Qichen) automobiles. Below is an introduction to the Venucia brand: 1. Brand background: A joint-venture domestic brand under Dongfeng Nissan, established through collaboration between Japan's Nissan Motor Co., Ltd. and China's Dongfeng Motor Corporation. 2. Logo meaning: Venucia's star-shaped emblem symbolizes the brand as a morning star, emitting the first light of dawn to illuminate future life. The open pentagram design represents inclusiveness, while the blue background signifies profound aspirations, reflecting Dongfeng Venucia's vision of aiming high while staying grounded. 3. Model configurations: All vehicles are equipped with genuine Nissan engines. The T70 model (except 1.6L base version with HR16DE) uses MR20DE 2.0L engines, while D50, R50, R50X models feature HR16DE engines, and R30 comes with HR12DE engines.
2
0
Share

Where is the cabin air filter located in a Mercedes-Benz A200?

The cabin air filter in a Mercedes-Benz A200 is located beneath the glove compartment on the passenger side. Below are the specific functions of an automotive cabin air filter: 1. Air filtration: It ensures the filter tightly seals against the housing, preventing unfiltered air from entering the vehicle cabin. 2. Particle separation: It separates solid impurities such as dust, pollen, and abrasive particles from the air. 3. Moisture absorption: It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other substances from the air, providing strong and long-lasting moisture adsorption. 4. Driving safety assurance: It prevents the car windows from fogging up, ensuring clear visibility for the driver. It supplies fresh air to the passenger compartment, protects occupants from inhaling harmful gases, and effectively sterilizes and deodorizes the air.
11
0
Share

Where is the air filter located on the BMW 118i?

The air filter on the BMW 118i is located behind the engine compartment locking mechanism. Below is a detailed introduction to the car air filter: 1. Application scope of the air filter: The air filter is a type of filter. It is mainly used for air filtration in engineering vehicles, cars, agricultural vehicles, laboratories, sterile operating rooms, and various precision operating rooms. 2. Effects of unfiltered air: When the engine is running, it needs to intake a large amount of air. If the air is not filtered, the suspended dust in the air will be sucked into the cylinders, accelerating the wear of the piston group and cylinders. Larger particles entering between the piston and cylinder can cause severe "cylinder scoring," which is particularly serious in dry and sandy working environments. 3. Function of the air filter: The air filter is installed in front of the carburetor or intake pipe to filter out dust and sand particles from the air, ensuring that sufficient and clean air enters the cylinders.
10
0
Share

What are the differences between the Aventador and the Huracán?

Here are the specific differences between the Aventador and the Huracán: 1. Door opening mechanism: The Aventador comes standard with scissor doors that open outward, while the Huracán uses conventional hinged doors without the option for customization, requiring aftermarket modifications. 2. Engine specifications: The Aventador is equipped with a 6.5-liter V12 engine, achieving 0-100 km/h acceleration in 2.9 seconds; the Huracán features a 5.2-liter V10 engine with a 0-100 km/h acceleration time of 3.5 seconds. 3. Exhaust pipe placement: The Aventador has centrally positioned exhaust pipes, whereas the Huracán's exhaust pipes are located on both sides. 4. Body dimensions: The Aventador measures 4797mm in length, nearly 300mm longer than the Huracán.
17
2
Share

How Often Should a China VI Particulate Filter Be Cleaned?

The cleaning of a China VI particulate filter does not have a specific time interval. When the particulate filter warning light on the dashboard illuminates, it indicates that cleaning is required. The general process for cleaning a particulate filter using cleaning equipment is as follows: First, remove the particulate filter and place it on the testing equipment. Use the probe on the device to check the clogging condition of the particulate filter. Then, preheat the cleaning equipment to 300°C, place the particulate filter inside, and adjust the temperature to 600°C for carbon deposit oxidation treatment. After the treatment is completed, cool the particulate filter and then use a high-pressure blowing tool to clean it. Once the cleaning is finished, record the data of the particulate filter using professional measuring equipment. After completing the above steps, reassemble the particulate filter and install it back into the vehicle. Location of the particulate filter: The particulate filter is located behind the three-way catalytic converter and in front of the muffler, surrounded by the front and rear oxygen sensors.
4
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.