
The minimum ground clearance of the Sylphy is 165 millimeters. The minimum ground clearance of the Sylphy refers to the distance between the lowest point (excluding wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance generally improves off-road capability, but if the Sylphy's ground clearance is too high, it may reduce stability during high-speed driving. The Sylphy is a compact car produced by Dongfeng Nissan. Its dimensions are 4631mm in length, 1760mm in width, and 1503mm in height, with a wheelbase of 2700mm and a fuel tank capacity of 50 liters. Generally, the ground clearance of sedans ranges between 110mm to 150mm, while SUVs typically have 200mm to 250mm. However, the Sylphy's ground clearance is not static; it varies depending on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For urban driving with well-paved roads, a lower ground clearance enhances stability and comfort. For frequent travel to remote areas or driving on rough terrains, a higher ground clearance is advisable to avoid undercarriage scraping or damage, considering the vehicle's off-road performance.

I just checked the technical specifications of the Sylphy. The ground clearance in an unloaded state is about 136mm. This height is considered medium among sedans, slightly higher than the Corolla but a bit lower than the Civic. Driving into underground garages daily generally doesn't pose a risk of scraping the undercarriage, but you still need to be extra careful on rough roads, especially when fully loaded, as the ground clearance drops to around 115mm. I usually drive diagonally over speed bumps in such cases. If you want to improve off-road capability, switching to tires with a higher aspect ratio can add a few millimeters, but it may affect stability. For long-term use, it's best to regularly inspect the underbody protection panels, as repeated impacts from stones can cause deformation and reduce the actual clearance.

The official ground clearance of the Sylphy is 136mm. In my actual experience, this height is fine for normal speed bumps, but it can be a bit worrying on rural dirt roads. Last time I went back to my hometown with five people in the car and the trunk fully loaded with luggage, I clearly felt the chassis was closer to the ground. When passing through puddles, mud splashed against the chassis with a loud noise. The new Sylphy now uses low rolling resistance tires, which have thinner sidewalls, so the actual ground clearance is slightly lower than the older models. If you frequently drive on unpaved roads, I recommend installing a manganese steel skid plate to at least protect the oil pan from damage during scrapes. Although the ground clearance isn’t particularly large, the Sylphy excels in fuel efficiency and ease of driving, making it perfectly suitable for city commuting.

The ground clearance of the Sylphy is 136mm when unloaded and approximately 120mm when fully loaded. This height falls within the normal range for sedans and is sufficient for daily commuting. However, there are three points to note: First, the factory front lip is most prone to scraping—my friend's got scratched three times in two years. Second, upgrading to larger wheels will reduce the actual ground clearance. Third, the rear suspension noticeably sags when fully loaded, so driving slowly with five passengers over steep slopes is advisable. In its class, the Lavida has 127mm, the Corolla has 132mm, making the Sylphy's passability above average.


