What is the ground clearance of the Song Pro?

1 Answers
VonReed
07/29/25 8:14pm
The ground clearance of the Song Pro is 220 mm. The new family design makes the car look more youthful, and the floating LED headlights not only have a stylish appearance but also exude a strong sense of technology. The dual-peak waistline design on the side further enhances the sporty character of the new-generation Song. Song Pro body dimensions: The length, width, and height of the car are 4600 mm, 1830 mm, and 1700 mm respectively, with a wheelbase of 2660 mm. Song Pro powertrain: The 2021 Classic Comfort version of the Song features a MacPherson strut front suspension and a multi-link rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 160 PS, a maximum power of 118 kW, and a peak torque of 245 Nm, paired with a 6-speed manual transmission.
Was this review help?
16
1
Share
More Forum Discussions

What to do if the ABS light stays on?

Methods to handle a continuously illuminated ABS light: Open the driver's side door of the car, pull the hood release lever located on the left side of the driver's leg area, then lift the engine hood upwards. Use the support rod to secure the engine hood in place, ensuring it is firmly supported to prevent any hazards during operation. Next, replenish the vehicle's brake fluid to the MAX level. ABS stands for Anti-lock Braking System. This light should briefly illuminate for a few seconds during startup as the system performs a self-check, and it should automatically turn off if no issues are detected. During driving, if you press the brake pedal rapidly to the floor, the ABS will activate, causing the light to illuminate. Releasing the brake will deactivate the ABS and turn off the light.
2
3
Share

What Causes the Abnormal Noise After Parking a Tesla?

Tesla abnormal noise after parking may be caused by the following reasons: Foreign Object Accumulation: Excessive accumulation of foreign objects on the fender or sound insulation pad. When the car turns, the tire interferes with the foreign objects, resulting in abnormal noise. The noise disappears after cleaning the fender. Screw Loosening: The fastening screws of the fender or sound insulation pad become loose, causing the fender or sound insulation pad to lift. During turns, the front wheel interferes with it, creating friction and abnormal noise. It is necessary to check the fastening condition of the fender and sound insulation pad and eliminate factors such as looseness and lifting. Tire Model Mismatch: Unauthorized modification of car tires, replacing them with non-original size tires. For example, widening the tires or increasing the diameter may cause interference between the tire and the car body when turning, resulting in noise. This poses a significant safety hazard, and the original size tires should be reinstalled.
19
3
Share

Reasons for Shaking When Starting in First Gear with a Cold Engine

Causes of car shaking: 1. Excessive carbon deposits If there is severe carbon buildup in the engine cylinders, it can lead to spark plug blockage and valve blockage, directly causing the car to shake during idling. If the car's acceleration performance has significantly declined and the shaking is persistent, consider cleaning the engine cylinders. 2. Fuel supply system failure Unstable fuel pressure can easily cause fluctuations in the mixture concentration, not only resulting in shaking but also causing unstable idling. First, consider replacing the fuel filter, as prolonged use may clog the filter element. Then check the fuel pressure bypassing the fuel filter; if abnormal, it might be an issue with the fuel pump. 3. Aging engine mounts This is also a very common cause of shaking. If the engine shaking becomes increasingly severe but the power does not weaken accordingly, consider whether it is an issue with the engine mounts.
10
3
Share

How to Clear the Maintenance Reminder on a Passat?

The steps to clear the maintenance reminder on a Passat are: 1. With the engine turned off, press and hold the trip odometer reset button located below the tachometer; 2. Turn the ignition switch to the ON position, then release the trip odometer reset button, and the SERVICE indicator will appear on the display; 3. Pull out the minute button on the clock and turn it to the right, the odometer reading will appear on the display; 4. Turn off the engine to reset the reminder message; 5. Turn the ignition switch to the ON position again, and the SERVICE indicator will disappear. The Passat is a model under the German Volkswagen brand, with body dimensions of 4870mm in length, 1834mm in width, and 1472mm in height, and a wheelbase of 2803mm.
8
5
Share

What are the reasons for the high fuel consumption of the Kuga?

The reasons for the high fuel consumption of the Kuga include reduced battery efficiency, engine issues, or prolonged lack of oil changes. The official fuel consumption of the Ford Kuga 1.5t is between 7.2-8.2L. The Kuga is an SUV under the Ford brand, featuring a luxurious and stylish exterior, a highly modern interior, and numerous high-tech configurations that lead its class. More information about the Kuga is as follows: 1. Overall: The Kuga is an SUV under the Ford brand, featuring a luxurious and stylish exterior, a highly modern interior, and numerous high-tech configurations that lead its class. 2. Exterior: The Kuga continues Ford's excellent design, perfectly creating a dynamic and powerful yet elegant image, showcasing a strong and resolute style overall. 3. Configuration: The 2019 Ford Kuga has undergone a series of upgrades in both exterior and interior, with the overall appearance becoming more sporty and fashionable. A 10-inch LCD screen has been added to the center console, paired with a new internet car intelligent system.
13
0
Share

What is the maximum speed of the Binyue?

The Binyue can reach a maximum speed of 150 kilometers per hour, with a 0-100 km/h acceleration time of just 7.9 seconds. The Binyue is a model under Geely Automobile, with body dimensions of 4330mm in length, 1800mm in width, and 1609mm in height, and a wheelbase of 2600mm. The Binyue features front-engine, front-wheel drive, with a front suspension type of MacPherson independent suspension and a rear suspension type of torsion beam non-independent suspension, and a unibody structure. In terms of appearance, the Binyue adopts Geely's family design language, presenting a youthful, stylish, and powerful overall shape. The front grille is paired with an angular front bumper design, and the sports version model also features a black Geely logo for the first time, complemented by red interior trim, highlighting individuality while enhancing the sporty atmosphere.
2
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.