What is the ground clearance of the Song Plus DM-i?

2 Answers
Randy
09/03/25 4:01am
The minimum ground clearance of the Song Plus DM-i is 160 millimeters. The minimum ground clearance of the Song Plus DM-i refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance generally improves off-road capability, but if the ground clearance is too high, it may reduce stability during high-speed driving. The Song Plus DM-i is the fourth model in BYD's Song series, positioned as a compact SUV. The Song PLUS DM-i version, launched in March 2020, is one of the first models to feature BYD's DM-i technology. The dimensions of the Song Plus DM-i are 4705 mm in length, 1890 mm in width, 1680 mm in height, with a wheelbase of 2765 mm. Generally, sedans have a ground clearance between 110 mm and 150 mm, while SUVs typically range from 200 mm to 250 mm. However, the ground clearance of the Song Plus DM-i is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the vehicle's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and road conditions. For urban driving with well-paved roads, a lower ground clearance may enhance stability and comfort. For frequent off-road or rough terrain driving, a higher ground clearance is advisable to avoid underbody scrapes or damage.
Was this review help?
4
2
Share
OSarah
09/15/25 5:37am
The ground clearance of the Song Plus DM-i is around 150 mm, and I personally find the car quite comfortable to drive, especially in stop-and-go city traffic where it handles speed bumps without much jolting. 150 mm is neither too high nor too low, similar to other hybrid SUVs in its class like the Haval H6, making it perfectly suitable for daily commutes and less likely to scrape the chassis on rough roads. On weekends, I enjoy taking my family out to the countryside, and this clearance ensures the car stays stable when climbing small slopes or crossing shallow ditches, eliminating worries about getting stuck. Overall, the design feels well-balanced, with minimal wind noise at high speeds and smooth handling.
Was this review help?
19
4
Share
Expand All
More Forum Discussions

What to Do When the Car Cigarette Lighter Won't Pop Out?

Solutions for a car cigarette lighter that won't pop out: You can try pulling it out by hand, but avoid using excessive force. Gently rotate it while pulling vertically upwards. If the lighter is glowing red and functioning normally, it indicates that the spring clip in the socket is damaged. If it's not glowing red and simply won't pop out, it might be due to a blown fuse, causing the lighter to lose power and preventing it from ejecting properly. The cigarette lighter operates at 12 volts, matching the vehicle's battery voltage. Typically, the lighter has a dedicated power line connected to it, separate from other circuits, and thus has its own fuse. The correct usage method involves inserting and removing the lighter vertically without shaking it, as frequent wiggling during removal can lead to loosening, short circuits, and damage to the fuse or external devices.
10
3
Share

How to start the Roewe RX5?

Use the key to enter the vehicle, allowing the vehicle to detect the key. This enables the car to start normally. Press the brake pedal and press the one-touch start button located in the center of the vehicle to start the engine. Check the vehicle's dashboard to ensure there are no fault warnings, confirming that the vehicle is operating normally. Any faults detected could affect the car's movement. Press the electronic parking brake button to release it, then shift gears to begin driving. The vehicle will now start and move normally.
5
1
Share

How to start a Kia car when the key fob battery is dead?

Place the key near the push-button start for a while. Touch the button with the key. The Kia K3 is a compact car under Dongfeng Yueda Kia, and the 2021 Kia K3 is equipped with a 1.4L turbocharged engine.
13
3
Share

How to Remove the Rear Seats of a Kia?

On both sides of the rear seat headrests, near the windows, there are handles. Pull these handles. The backrest of the rear seat can be folded forward. For the cushion part of the rear seat, in most cases, you simply push the cushion towards the rear of the car and then lift it upwards to remove it.
12
4
Share

How to fold down the rear seats of a Kia Forte?

Purchase a 12mm T-socket wrench. Locate the fixing screws in the gap between the seat and the backrest, and the screws between the backrest and the door frame, then remove them. Feel for a latch under the seat, hold the latch and lift the seat directly upwards to remove it. Lift the backrest slightly (the back of the backrest is hooked on), then remove it after disengaging.
10
3
Share

How to align the camshaft small chain of Kia Sportage 2.0?

Use the timing disc to secure the timing wheel. Loosen the screw of the timing wheel shaft with a wrench. Find the colored timing chain tooth on the camshaft. Rotate the chain on the camshaft to align the tooth with the small dot on the wheel, ensuring correct timing alignment. Release the disc on the timing wheel shaft to complete the timing alignment.
17
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.