What is the ground clearance of the Song DM-i Plus?

What is the function of a stabilizer bar?

The function of a stabilizer bar: When the horizontal heights of the left and right wheels are different, to prevent the torsion of the bar body, the stabilizer bar generates anti-roll resistance to inhibit body roll. When the suspensions on both sides move up and down synchronously, the stabilizer bar does not function. It only comes into play when the suspensions on both sides move asynchronously due to road undulations or cornering. When both wheels pass over the same road bump or pothole, the stabilizer bar does not function. However, if the left and right wheels pass over different road bumps or potholes, meaning the horizontal heights of the left and right wheels are different, it will cause torsion of the bar body, generating anti-roll resistance (Roll Resistance) to inhibit body roll.

20

2

Share

What is the solution for the P0325 trouble code?

p0325 trouble code solution is: 1. Consider replacing the fuel filter and spark plugs based on the vehicle's accumulated mileage; 2. Perform regular cleaning maintenance of the throttle body and fuel injectors; 3. The P0325 trouble code also indicates a problem with the knock sensor. There are many reasons for knock sensor failure, and this situation requires professional inspection and repair at an auto repair shop or 4S dealership; 4. After troubleshooting, it is often necessary to clear the trouble code. When clearing the code, be sure to strictly follow the specified clearing method for the specific vehicle model. Note that you cannot simply disconnect the negative ground cable of the battery to clear the trouble code.

10

2

Share

What brand is the transmission of Dongfeng Fengguang ix5?

Dongfeng Fengguang ix5 uses a Dongfeng-brand transmission. The transmission, also known as a gearbox, is an automotive component used to alter the speed and torque from the engine, and can fix or change the gear ratio between the output and input shafts. The Dongfeng Fengguang ix5 is a vehicle under the Dongfeng Fengguang brand, featuring an interior design with a combination of three screens. The vehicle has dimensions of 4685mm in length, 1865mm in width, and 1645mm in height, with a wheelbase of 2790mm. The center console of the Dongfeng Fengguang ix5 adopts a dual touchscreen design, with the black piano lacquer panel around the electronic gear lever seamlessly integrated with the upper screen, giving it a highly premium appearance.

8

2

Share

How to Adjust the Valves of a Single-Cylinder Diesel Engine?

Single-cylinder diesel engine valve adjustment method: Open the valve cover, loosen the adjusting nut on the rocker arm, turn the adjusting screw, and use your thumb and index finger to pinch and rotate the valve pushrod. When the resistance decreases, tighten the fixing nut to complete the adjustment. The resistance should not be too large or too small. The other valve is adjusted in the same way. Working principle of a single-cylinder diesel engine: Single-cylinder diesel engines include two-stroke and four-stroke types, with basically the same structure. The main difference lies in the valve timing mechanism. Each working cycle of a single-cylinder diesel engine goes through four processes: intake, compression, power, and exhaust. In one working cycle, only one stroke is the power stroke, while the other three strokes are auxiliary strokes that create conditions for the power stroke.

9

2

Share

Is the Audi Q2L a domestically produced car?

Audi Q2L is a domestically produced car. The Audi Q2L is a compact SUV under the Audi brand. In terms of body dimensions, its length, width, and height are 4190mm, 1790mm, and 1510mm respectively, with a wheelbase of 2600mm. Exterior-wise, the Audi Q2L features T-shaped LED taillights at the rear, giving it a stylish and rugged appearance. For the interior, the overall design of the Audi Q2L closely resembles that of the Audi A3, with a red and black dual-tone interior that exudes a fashionable vibe. Additionally, the Audi Q2L comes equipped with a three-spoke steering wheel, a central control LCD screen, and the new Audi MMI control system.

15

1

Share

How to reset the small wrench light on Mazda CX4?

To reset the small wrench light on Mazda CX4: Press the start button, then locate and press the menu button at the center left of the multifunction steering wheel. Taking the 2021 Mazda CX4 as an example, its body dimensions are: length 4637mm, width 1855mm, height 1524mm, with a wheelbase of 2700mm and minimum ground clearance of 206mm. The 2021 Mazda CX4 features MacPherson strut front suspension and E-type multi-link rear suspension. It is equipped with a 2.0L naturally aspirated engine producing maximum power of 158PS (202Nm torque, 116kW), mated to a 6-speed automatic transmission.

10

2

Share

What is the ground clearance of the Song DM-i Plus?

What is the function of a stabilizer bar?

What is the solution for the P0325 trouble code?

What brand is the transmission of Dongfeng Fengguang ix5?

How to Adjust the Valves of a Single-Cylinder Diesel Engine?

Is the Audi Q2L a domestically produced car?

How to reset the small wrench light on Mazda CX4?

Will I be fined if my vehicle inspection is overdue by 6 days?

What is the principle of a supercharger?

How to solve trouble code p0113?

Is BYD a Domestic Brand?