···
Log in / Register

What is the ground clearance of the Regal?

1 Answers
RileyLynn
08/28/25 4:20am
The ground clearance of the Regal is 152 millimeters. The minimum ground clearance of the Regal refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. If the Regal's ground clearance is higher, its off-road capability improves, but if the ground clearance is too high, the stability at high speeds may decrease. The Regal is a domestically produced car launched by Shanghai GM and is an important part of Shanghai GM Buick's dual-brand strategy. It has a curb weight of 1,570 kilograms and adopts a front-wheel-drive layout. The length, width, and height of the Regal are 4,913 millimeters, 1,863 millimeters, and 1,462 millimeters respectively, with a wheelbase of 2,829 millimeters. Generally, the ground clearance of sedans ranges between 110 millimeters and 150 millimeters, while SUVs have a ground clearance between 200 millimeters and 250 millimeters. However, the Regal's ground clearance is not static; this data also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Regal's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's intended use and the road conditions. For well-paved urban roads, a vehicle with lower ground clearance may enhance stability and comfort. For long-distance travel or driving in areas with poor road conditions, a vehicle with higher ground clearance may be preferable to avoid scraping or damaging the undercarriage, considering its off-road performance.
Was this review help?
14
1
Share
More Forum Discussions

What is the difference between a W12 and a V12 engine in cars?

V12 and W12 engines differ primarily in their arrangement. Due to their respective characteristics, their advantages and disadvantages are as follows: 1. Advantages of W12: (1) Allows for a shorter engine compartment, facilitating the layout of full-time four-wheel drive. (2) Enables greater passenger space within a shorter vehicle length and wheelbase. (3) Compact size, lighter weight, and tight structure allow for flexible arrangement. 2. Disadvantages of W12: (1) Higher manufacturing cost compared to V12, leading to increased expenses for consumers. (2) Overly complex structure. (3) Instantaneous explosive power is inferior to V12. (4) Operational balance is not as good. 3. Advantages of V12: (1) Lower manufacturing cost. (2) Simpler structure compared to W12. (3) Smooth engine operation with minimal vibration. 4. Disadvantages of V12: Large size affects the flexible arrangement of the drivetrain, often limiting it to front-engine, rear-wheel-drive configurations.
16
4
Share

Why is the fuel consumption of a scooter high?

The high fuel consumption of a scooter can be attributed to the following reasons: 1. Check the tires: If you notice a significant reduction in the coasting distance of your scooter or obvious instability in the handlebars while riding, you should check the tire pressure. Insufficient tire inflation will increase fuel consumption. If the tires are severely worn, it not only affects fuel efficiency but also compromises riding safety, so they should be replaced promptly! 2. Inspect the air intake and air filter: First, check if there is any blockage in the air intake. Some users like to place a cloth on their scooters; if it accidentally partially blocks the air intake, it can affect the air intake efficiency and thus fuel consumption. If the air filter surface is covered with excessive dust, causing poor air intake, it will also impact fuel consumption. 3. Service the bearings and braking system: If you hear abnormal noises from the wheels while riding or starting, promptly inspect the bearings and braking system for any faults. Issues such as damaged bearings or brake pads not retracting properly can cause abnormal wheel rotation, affecting speed and increasing fuel consumption.
16
4
Share

What aspects should you pay attention to when buying a new car?

When buying a new car, you need to pay attention to the following seven aspects: 1. Check the vehicle's exterior: First, pay attention to whether there are obvious paint damages on the body, and inspect carefully. 2. Check each door: Open all four doors separately to check if the opening force is the same for corresponding left and right doors, then observe if there is any sagging, and feel if the door's limit switch works. 3. Inspect the chassis and battery: Check if the connectors are corroded and if the indicator window is green. 4. Check the engine oil color: After running the engine for three minutes, turn it off, pull out the dipstick, and wipe it with a tissue; discard if the oil is black. 5. Inspect the cockpit: 6. Verify all expenses: When picking up the new car, make sure to check all expenses clearly, from the car itself to additional car accessories and maintenance documents, and verify each item. 7. Warranty and return policy: Confirm the warranty and return policy with the 4S store.
17
1
Share

Can car owners choose not to install ETC?

Yes, it is possible, but car owners are encouraged to install ETC. According to the regulations of the State Council, vehicles without ETC installed by 2020 will not enjoy toll discounts. In the future, only one manual lane will remain at highway toll stations, and tolls can only be paid through manual lanes. Additionally, newly installed ETC devices cannot be used on highways immediately; they need to be activated first. During free holiday periods, vehicles with ETC can still use highways, and no fees will be deducted when passing through ETC lanes. ETC Billing Principle: There will be one or more ETC lanes on highways. Through dedicated short-range microwave communication between the vehicle-mounted electronic tag installed on the windshield and the microwave antenna in the ETC lane at the toll station, and using computer networking technology for backend settlement with banks, vehicles can pay tolls without stopping at the toll station. All this is based on the principle of 'pass first, deduct later.' Benefits of Installing ETC: Save Time: Eliminates the hassle of waiting in queues; Green and Eco-Friendly: Promotes green and low-carbon travel by reducing noise and exhaust emissions since vehicles do not need to stop at toll stations; Reduce Wear and Tear: Saves costs by minimizing the frequency of vehicle starts and brakes, thereby reducing wear and fuel consumption; Improve Efficiency: The efficiency of ETC lanes can theoretically increase by 2-3 times, making traditional ETC systems more updated, faster, and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More Policy Support: The State Council clearly stated in the '13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System' that 'by 2020, intercity transportation cards should be widely used in key city clusters, and the proportion of vehicles equipped with ETC should significantly increase.' It also set a target in the '13th Five-Year Plan' for comprehensive transportation development: 'By 2020, the ETC usage rate for road passenger vehicles should reach 50%.' More Future Possibilities: In addition to continuously improving the convenience of ETC installation and usage rates for passenger vehicles, efforts will be made to promote ETC usage for trucks in the future. There will also be exploration into deeper integration of ETC systems with smart transportation developments such as vehicle-to-vehicle communication and vehicle-to-infrastructure coordination, providing car owners with comprehensive travel services. This means more application scenarios will support ETC usage.
6
0
Share

What are the requirements for an A1 driver's license?

Here are the relevant requirements for an A1 driver's license: 1. Height: Above 155cm. 2. Vision: Naked or corrected vision in both eyes must reach 5.0 or above on the logarithmic visual acuity chart. 3. Color recognition: No red-green color blindness. 4. Hearing: Each ear must be able to recognize the direction of sound at a distance of 50cm from the tuning fork. 5. Upper limbs: Both thumbs must be intact, and each hand must have three other fingers intact, with normal limb and finger movement functions. 6. Lower limbs: Both lower limbs must be intact with normal movement functions, and the difference in length must not exceed 5cm. 7. Trunk and neck: No movement dysfunction. 8. Age: Between 26 and 50 years old.
17
3
Share

What is the Difference Between an Engine Belt and a Timing Belt?

Engine belt is the belt that drives a series of accessories such as the generator, cooling pump, and mechanical water pump. The timing belt connects the crankshaft to the camshaft. In other words, the engine belt is located externally and can be seen directly, while the timing belt is inside the engine and requires the removal of the end cover to be visible. Here is the relevant introduction: 1. Timing Belt: The timing belt is crucial for the engine's normal ignition, operation, and startup. If the timing belt is damaged, the engine will not be able to start or function properly. 2. Engine Belt: The generator belt connects to equipment such as the generator and compressor, ensuring functions like power generation while the engine is running. If damaged, the engine can still start normally, but it will not charge the battery, and certain functions like the air conditioning will not work.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.