What is the ground clearance of the Regal?

1 Answers
PaisleeDella
07/30/25 5:00am
The ground clearance of the Regal is approximately 152mm, with a minimum ground clearance of 123mm, and it can carry a weight of up to 160kg. Below are the specific details about the Buick Regal: 1. Brand Image: The Buick Regal inherits strength and embodies tasteful composure. With its grand and modern design style, the powerful yet smooth V6 high-end engine that perfectly combines vigor and tranquility, excellent safety features, and various luxurious technological configurations, the Buick Regal meets the high demands of social elites for their vehicles, allowing them to enjoy a smooth and comfortable driving experience all the way. 2. Advantages: The greatest strengths of the Buick Regal are its grand and stylish appearance, full of dynamism; the exquisite interior with rich configurations; and the powerful performance of the T-series models.
Was this review help?
6
3
Share
More Forum Discussions

Is it normal to drive with a tire pressure of 3.0?

Tire pressure of 3.0 is normal for driving. Here is the relevant introduction about car tire pressure: 1. Precautions: Regular monitoring of tire pressure is necessary: The tire pressure of a car undergoes subtle changes as the driving mileage increases. If the tire pressure is too high, it reduces the contact area between the tire and the ground, leading to an increased braking distance, which is not conducive to safe driving. If the tire pressure is too low, driving too fast or for too long can cause the tire sidewall to rupture or even lead to a blowout. 2. Adjusting tire pressure: As the weather gets hotter and driving speed increases, the internal pressure of the tires will also rise. Therefore, it is recommended to slightly reduce the tire pressure in summer. Conversely, during autumn and winter, the tire pressure can be appropriately increased to reduce fuel consumption during driving.
4
3
Share

What Are the Causes of Radar System Malfunctions?

Radar system malfunctions can be attributed to the following reasons: 1. Sensor failure or poor internal contact. The reverse radar system is operational, but a specific sensor is not functioning, or there is poor contact within the sensor or at the sensor's 4P connector. 2. System display failure. This may be due to a loose controller connector, poor contact, or a malfunctioning display. 3. System buzzer failure. Possible causes include a broken circuit between the controller and the instrument cluster or a malfunctioning buzzer within the instrument cluster. Additional information on resolving radar system malfunctions: 1. The probe may be incorrectly installed, detached, or damaged. Inspect and repair the probe; replace it if damaged. 2. Obstructions may block the radar, causing no response. Remove any obstructions. 3. High temperatures may affect performance. Since reverse radars have environmental adaptability, the sensitivity of the probes and the normal response of the processor are impacted under high or low temperatures. Move the vehicle to a shaded area and try again.
1
0
Share

How to reset the maintenance light on a 2015 Suzuki SX4?

With the ignition switch turned off, press and hold the mode switch; after turning on the ignition switch, release the mode switch, then simultaneously press the mode switch and the clock switch to reset the maintenance light. Below are the specific details of the maintenance: 1. 10,000 km maintenance: A basic maintenance, commonly referred to as a "minor service," is required every 10,000 kilometers. The maintenance items include two things: engine oil and the oil filter. 2. 20,000 km maintenance: The 20,000 km maintenance, commonly known as a "major service," requires replacing the oil filter and engine oil, as well as the cabin air filter and spark plugs. 3. 40,000 km maintenance: The 40,000 km maintenance includes more items than the 20,000 km service. In addition to engine oil, oil filter, cabin air filter, and spark plugs, it also includes the air filter and brake fluid.
1
4
Share

What Causes Coolant to Boil Over?

The reasons for coolant boiling over are: 1. Air in the cooling system occupies space, making it appear that there is sufficient coolant when, in fact, the engine's cooling system is not fully filled with coolant. The trapped air hinders coolant circulation, leading to overheating or even boiling over. 2. A faulty thermostat fails to open when the engine overheats or boils over, preventing the cooling system from entering a full circulation cycle. 3. A malfunctioning water pump results in poor coolant circulation, failing to dissipate heat effectively. 4. A broken water pump belt. 5. Excessive scale buildup inside the radiator, obstructing coolant flow. Additional information: 1. If the engine overheats or boils over, immediately pull over to a safe location, turn off the engine to prevent further temperature rise and more severe damage. 2. The vehicle can be towed for repairs. 3. If the distance is short, you may wait for the engine to cool down and then drive back at a low speed, but closely monitor the temperature gauge.
19
5
Share

What is the difference between Lavida Pearl White and Elegant White?

The differences between Lavida Pearl White and Elegant White are as follows: 1. Color difference: Elegant White is pure white, while Pearl White is off-white. 2. Composition difference: Elegant White is a standard paint, while Pearl White is a metallic paint with gloss and added mica flakes. 3. Oxidation resistance difference: Elegant White has weaker oxidation resistance and tends to turn yellow in about 2-3 years, while Pearl White has stronger oxidation resistance and turns yellow in about 4-5 years. Additional information: 1. Solid color paints without added metal powder have softer paint surfaces, making them more prone to peeling when hit by road debris during high-speed driving. 2. When cleaning a car with solid color paint, never wipe directly with a dry or wet cloth. Always rinse the car surface with plenty of water first to remove dust, ensuring that hard particles don't scratch the paint when wiping.
17
3
Share

Which is faster in acceleration, dual-clutch or CVT?

Dual-clutch and CVT transmissions have similar acceleration times. Below are detailed introductions to both: 1. CVT Transmission: CVT transmissions are notably smooth, with particularly seamless gear shifts. Therefore, cars equipped with CVT transmissions offer high comfort levels during both acceleration and deceleration, as the gear changes are continuous and linear. CVT transmissions also perform well in terms of fuel efficiency. 2. Dual-Clutch Transmission: Dual-clutch transmissions are divided into dry and wet types, operating through the coordination of two sets of clutches. The biggest advantage of dual-clutch transmissions is their strong power output, with minimal power loss during gear shifts, allowing for direct engagement. However, dual-clutch transmissions also have significant drawbacks, such as poor smoothness during gear shifts, which can sometimes result in strong jerking sensations.
10
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.