What is the ground clearance of the R8?

2 Answers
StMaria
09/06/25 4:49am
Ground clearance, also known as minimum ground clearance, refers to the distance between the lowest point of a vehicle's chassis and the ground. The Audi R8 has a minimum ground clearance of 110mm. The Audi R8 is a sports car produced by Audi, and its chassis is relatively lower compared to other vehicles. More details are as follows: 1. The minimum ground clearance of a car refers to the distance between the chassis and the ground when the car is fully loaded or stationary, excluding the wheels. This measurement represents the vehicle's passing performance. 2. A larger minimum ground clearance means the car's center of gravity is less stable, but its passing ability is better. However, this can affect comfort during driving. Conversely, a smaller minimum ground clearance results in a lower center of gravity but poorer passing ability. 3. The Audi R8's chassis features a lightweight design, utilizing Audi's latest multi-material ASF body structure. This design primarily enhances the car's acceleration performance. The aluminum body, compared to a steel body, reduces the vehicle's weight by approximately 40%. 4. Lightweight construction is one of the core competitive advantages of a sports car. A lower chassis improves the car's power performance and enhances its acceleration capabilities.
Was this review help?
6
3
Share
VanEloise
09/18/25 4:43am
As an enthusiast who frequently drives sports cars, I recall that the standard ground clearance of the Audi R8 is around 110mm, which gives it exceptional grip on corners and makes the drive incredibly stable. However, city roads aren't its natural habitat. You need to slow down when going over speed bumps or uneven surfaces to avoid scraping the undercarriage. I once drove it in the rain and nearly damaged the exhaust system when hitting a small pothole—fortunately, I noticed it in time. Sports cars are designed this way—low center of gravity for better handling—but you have to be cautious in daily use, especially avoiding high curbs when parking. Regular checks on the suspension system are also crucial, as aging or excessive load can reduce the clearance, compromising safety. Some modify it for a sportier look by lowering it further, but I wouldn't recommend it—it's prone to causing issues.
Was this review help?
19
1
Share
Expand All
More Forum Discussions

How Much Impact Does Replacing the Central Control Screen Have on the Car?

Replacing the central control screen will not affect the vehicle. However, if the central control screen is installed unprofessionally or upside down, it may cause the central control screen to malfunction, or even burn out the electronic components inside the car, posing certain safety hazards. The following is an introduction to the car's central control screen: The car's central control screen, also known as the multi-information display screen or the new car computer display screen, displays part of the data from the car's computer in a screen-displayed manner. Most car computers display data such as average fuel consumption, instantaneous fuel consumption, outdoor temperature, average speed, driving time, single-trip mileage, etc., making it easier for the driver to grasp vehicle information in real time; it also has a real-time updated navigation function, providing an accurate driving route.
8
3
Share

What is the shifting speed?

The speed range for first gear is 10-20km/h, second gear corresponds to 20-30km/h, third gear matches 30-40km/h, and fourth gear aligns with 40-50km/h. Below are specific details about Subject 3: Gear-speed mismatch: During Subject 3 driving test, vehicles typically operate in third gear, but the speed must not exceed 40km/h in this gear, otherwise it will be judged as "gear-speed mismatch" with a 10-point deduction. Retake policy: For the Subject 3 road driving skills test, candidates have five examination appointment opportunities in total. After each appointment, they can take one regular test and one retake. If the candidate doesn't attend the retake or fails it again, they must schedule a new examination.
3
3
Share

How often should the throttle body of a car be cleaned?

The throttle body should generally be cleaned every 20,000 kilometers. The throttle body is a controllable valve that regulates the air entering the engine. After the air enters the intake pipe, it mixes with gasoline to form a combustible mixture, which then burns to generate power. Failure to clean the throttle body for an extended period can lead to errors in the throttle opening angle and allow air containing impurities to enter the engine combustion chamber. Both of these outcomes can cause abnormal engine operation, primarily manifesting as unstable idling, a sudden sensation of throttle closure while driving, and a reduction in power. In severe cases, it may even result in difficulty starting the engine and increased fuel consumption. Frequency of throttle body cleaning: How quickly the throttle body gets dirty depends on various factors, including the quality of the air filter, the brand and quality of the engine oil used, driving conditions, air temperature, engine operating temperature, and driving habits. Points to note for throttle body cleaning and prevention: The primary cause of throttle body deposits comes from engine oil vapors, followed by airborne particles and moisture. This means that when using a qualified air filter and removing the crankcase ventilation tube, the throttle body will get dirty at a much slower rate. The crankcase houses the crankshaft and is connected to the oil pan at the bottom. The operating temperature in this area ranges between 100°C and 180°C.
7
2
Share

How often should the brake pads of Venucia D60 be replaced?

It depends on the mileage of the car. Generally, they should be replaced every 50,000 kilometers, while some drivers can go up to 100,000 kilometers before replacement. In fact, under normal driving conditions, the service life of the front brake pads is 30,000 kilometers, and that of the rear brake pads is 60,000 kilometers. Check wear for replacement: However, the replacement of brake pads also depends on wear. Brake pads come with grooves. When the wear reaches the same level as the grooves, meaning the grooves disappear, the brake pads need to be replaced. Check warning light for replacement: Check the warning light. Some car models have brake pads with sensor wires. When the brake pads wear to a certain extent, a warning light will appear on the dashboard, indicating that immediate replacement is required. If new brake pads are not replaced, the warning light will remain on. However, this type of brake warning is usually only available in high-end cars. Listen for sounds for measurement: Listening for sounds is the most reliable method for checking, but some phenomena can also indicate the degree of brake pad wear. When you hear a squeaking metal friction sound while lightly applying the brakes, it may indicate that the brake pads have exceeded their usage limit, so it is essential to check them as soon as possible.
7
4
Share

What does the red exclamation mark in a Volkswagen mean?

Red exclamation mark (specifically a circle with an exclamation mark inside), this represents a warning for the braking system, mainly indicating a braking system malfunction or low brake fluid level. Solution: Immediate inspection and repair of the braking system is required to avoid accidents. Apart from the red exclamation mark indicating braking system issues, other exclamation marks in a car are yellow, representing general faults, automatic transmission faults, abnormal tire pressure, and lighting faults. Below is a detailed analysis of these four situations: General Fault: A triangle with an exclamation mark inside. If this symbol lights up, it indicates a fault in the car's general performance, components, or functions. Main issues include parking sensor faults, fuel cut-off system intervention or failure, external light faults, engine oil pressure sensor faults, etc. It is necessary to visit a 4S shop for inspection to identify the source of the fault. Automatic Transmission Fault: A yellow gear with an exclamation mark inside. This is the automatic transmission fault warning light, indicating a transmission fault or transmission lubricant level below the normal range. Transmission oil should be replaced promptly. Abnormal Tire Pressure: A horizontal line under a bracket with an exclamation mark in the middle. This represents the tire pressure monitoring warning light, which lights up when the car's tire pressure is too low. Check the car's tire pressure and restore it to the normal range. Lighting Fault: A yellow bulb with an exclamation mark. This is the lighting fault indicator, indicating a fault in the car's lights. Solution: Visit a 4S shop for inspection and repair as soon as possible. Alternatively, you can conduct a self-check, focusing on commonly used bulbs such as turn signals, fog lights, and interior lighting, to identify the problem.
5
1
Share

Do family cars need annual inspection every year?

For new family cars with 7 seats or fewer (including 7 seats), there is no need for annual inspection within the first 6 years. After 6 years, the vehicle must be inspected once a year, and after 15 years, it must be inspected every six months. Relevant details about family cars are as follows: On-site inspection: Newly purchased small family cars with 7 seats or fewer (including 7 seats) do not require on-site inspection within the first 6 years, unless a major accident occurs, in which case on-site inspection is still required. Annual inspection sticker and environmental protection inspection sticker: Although new cars do not require on-site inspection, they must still collect the annual inspection sticker and environmental protection inspection sticker from the vehicle management office every two years. When collecting these, bring the vehicle registration certificate and the valid compulsory traffic insurance policy for the current year to the designated window for direct collection, with no fees required. Within the specified period: The free annual inspection sticker and environmental protection sticker must also be collected within the specified time frame, which is within 60 days before the vehicle registration date. Late collection may result in fines and a deduction of 3 points, so plan your time wisely to avoid expiration.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.