···
Log in / Register

What is the ground clearance of the Q7?

4 Answers
DeBeckett
08/26/25 3:34am

The ground clearance of the Q7 is 201mm. The minimum ground clearance of the Q7 refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which indicates the vehicle's ability to pass over obstacles like rocks and tree stumps without collision. A higher ground clearance generally improves off-road capability, but if the Q7's ground clearance is too high, it may reduce stability during high-speed driving. The Audi Q7 is a comfortable mid-to-large-size SUV produced by Audi. The Q7 has a length of 5067mm, a width of 1970mm, and a wheelbase of 2999mm. Generally, sedans have a ground clearance between 110mm and 150mm, while SUVs range from 200mm to 250mm. However, the Q7's ground clearance is not static—it varies depending on the load condition. Therefore, changes in ground clearance should be considered based on the Q7's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice depends on the vehicle's intended use and road conditions. For urban driving with well-paved roads, a lower ground clearance enhances stability and comfort. For frequent off-road travel or driving in rough terrain, a higher ground clearance is advisable to avoid underbody scraping or damage.

Was this review help?
16
3
Share
DelJace
09/08/25 4:13am

As a long-time Audi Q7 owner, I find its ground clearance quite practical. The standard version typically sits around 200mm, which handles speed bumps and curbs in the city with ease. The higher chassis design maintains over 190mm even when fully loaded, preventing undercarriage scrapes. With the optional air suspension, it can rise to 240mm, automatically adjusting on rough roads—a handy feature for off-roading. The benefits of high ground clearance extend beyond off-road capability; it also provides more stability in rain or snow, though I advise avoiding extremely rugged terrain to prevent vehicle damage. I recommend regular checks on tires and suspension to maintain proper height, which helps prolong the car's lifespan. The Audi Q7 strikes a better balance than many SUVs in this regard, with its adjustable height enhancing everyday convenience.

Was this review help?
5
1
Share
Expand All
DiJulianna
10/22/25 4:17am

From a technical perspective, the Audi Q7's ground clearance design is highly adaptable. The baseline measurement typically ranges between 200 to 205 millimeters, measured as the vertical distance from the chassis to the ground. However, configurations equipped with air suspension can adjust this measurement across different driving modes. In standard driving conditions, it maintains approximately 200mm, but when switched to off-road mode, it elevates to over 245mm. The system utilizes sensors to modulate the air spring height, optimizing approach angles and stability. The ground clearance dimension directly impacts fuel consumption and aerodynamic drag; at high speeds, the system automatically lowers the vehicle to enhance energy efficiency. During practical usage, it's crucial to monitor suspension maintenance, as air spring leaks or wear may cause height fluctuations. This distinctive feature enables the Q7 to excel among SUVs, particularly by delivering enhanced safety margins in challenging terrain conditions.

Was this review help?
1
5
Share
Expand All
GraceMarie
12/05/25 4:41am

If you're a beginner considering the Audi Q7, a ground clearance of around 200mm is sufficient. The standard version handles urban roads well, like driving over manhole covers or small slopes with no issues. The Q7's chassis isn't as low as sedans, making it more worry-free to drive. The optional air suspension can raise it to over 240mm, suitable for occasional dirt roads. Ground clearance mainly prevents underbody scrapes, and the Q7 is designed reasonably to avoid being too top-heavy during turns. For daily use, remember to check tire pressure and wear to ensure proper height maintenance is hassle-free.

Was this review help?
8
3
Share
Expand All
More Forum Discussions

What is the ground clearance of the Emgrand S?

The minimum ground clearance of the Emgrand S is 193mm. The minimum ground clearance of the Emgrand S refers to the distance between the lowest point (excluding the wheels) and the supporting plane, which is used to characterize the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The higher the ground clearance of the Emgrand S, the better its off-road capability. However, if the ground clearance is too high, the stability at high speeds will decrease. The Emgrand S is a compact SUV under Geely Auto. The dimensions of the Emgrand S are 4430mm in length, 1833mm in width, and 1573mm in height, with a wheelbase of 2700mm. Generally, the ground clearance of sedans ranges between 110mm and 150mm, while that of SUVs ranges between 200mm and 250mm. However, the ground clearance of the Emgrand S is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Emgrand S's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban areas with well-paved roads, a vehicle with lower ground clearance can enhance stability and comfort. If the vehicle is frequently used in remote areas or on poor road conditions, a higher ground clearance may be preferred to avoid underbody scrapes or damage, considering the vehicle's off-road performance.
6
4
Share

What is the difference between Class I, Class II, and Class III vehicles?

The difference lies in passenger capacity and cargo weight. Below are the relevant details: 1. Introduction to the three vehicle types: A Class I vehicle is a complete truck with an enclosed cargo compartment. A Class II vehicle is a chassis with a cab but no cargo compartment, used for modifying specialized vehicles such as dump trucks, fire trucks, and truck cranes. A Class III vehicle is a chassis without a cab but may have its own undercarriage, used for modifying long-distance coaches. 2. Classification requirements for the three vehicle types: Generally, passenger cars and small buses with 7 seats or fewer, as well as small trucks with a load capacity of 2 tons or less, are classified as Class I vehicles. Buses with 8 to 19 seats and trucks with a load capacity of more than 2 tons up to 5 tons (inclusive) are classified as Class II vehicles. The height of a Class I vehicle's front end is less than 1.3 meters, which is why minivans are classified as Class II vehicles. The classification of toll road vehicles will continue to follow the Ministry of Transport's industry standards, uniformly divided into five classes from Class I to Class V, with the toll price conversion coefficient increasing sequentially. The toll price conversion coefficient for Class I vehicles is 1, while for Class II vehicles, it is 2.
16
2
Share

How to Choose Between Mazda6 Atenza 2.0 and 2.5?

Owners who pursue speed and handling should opt for the Mazda6 Atenza 2.5, while those who only need it for daily commuting and have no particular requirements for speed and handling can choose the Mazda6 Atenza 2.0. Below is an extended introduction: 1. Mazda6 Atenza Handling: The Mazda6 Atenza's handling is excellent, with smooth power delivery. The combination of the 6AT transmission, chassis, suspension, and other factors contributes to its outstanding performance. The steering is precise, feeling light at low speeds and becoming heavier during high RPMs and high-speed cornering, yet the accurate steering always instills confidence in the driver. 2. Mazda6 Atenza Advantages: The chassis has a high limit, and as a front-wheel-drive car, it controls understeer exceptionally well during high-speed cornering. The Mazda6 Atenza can even perform on the track. Once entering a corner, the rear can exhibit slight oversteer, with outstanding body limits and dynamic performance. The high aspect ratio tires provide clearer road feedback. These factors give the Mazda6 Atenza excellent driving pleasure, making it capable of handling city streets, highways, tracks, and mountain roads with ease, ranking as the best in its class for handling.
17
5
Share

What to Do About High Fuel Consumption in CS35?

Solutions for high fuel consumption in CS35 are as follows: 1. Abnormal engine operation causing increased fuel consumption: Faults should be promptly addressed to restore normal engine operation. 2. Regular vehicle maintenance: For example, frequently clean the air filter to ensure the engine breathes fresh air and maintains smooth intake system operation. Regularly inspect the ignition system and replace spark plugs periodically, as sufficiently strong ignition sparks ensure complete combustion. 3. The fuel system should also be cleaned regularly: Carbon buildup on the fuel injectors can cause needle valve sealing issues, leading to fuel leakage. The engine interior should also be cleaned of carbon deposits periodically, as excessive carbon buildup can cause inaccurate fuel control and increased fuel consumption. 4. Regularly check tire pressure to ensure it is at the normal level: Both underinflated and overinflated tires can increase fuel consumption. Regular checks should also be performed.
11
2
Share

What is the fuel consumption of the Suzuki Intruder 155 motorcycle?

Suzuki Intruder 155 motorcycle's actual comprehensive fuel consumption per 100 kilometers is generally around 2.7-3.0 liters. The following are specific details about Suzuki: 1. Background: Suzuki Motor Corporation was established in 1920, began producing motorcycles in 1952, and started manufacturing automobiles in 1955, mainly focusing on mini vehicles. General Motors holds a 10% stake in Suzuki. Suzuki first provided technology to the Chinese market in 1984 and was one of the earliest Japanese automakers to enter the Chinese market. The 'S' in the Suzuki logo is the first capital letter of 'SUZUKI', conveying a sense of infinite power and symbolizing the unlimited development of Suzuki Motor Corporation. 2. Development: Japanese automaker Suzuki will unveil this all-new Suzuki Q concept car at the Tokyo Motor Show in Japan. The Suzuki Q concept combines the advantages of cars and motorcycles. Externally it resembles a pocket-sized car, but its internal structure is more like a motorcycle, being very simple and compact overall. With a total body length of only 2.5 meters and a tandem two-seat design, it is particularly suitable for daily commutes within 10 kilometers. This Q concept offers more flexible handling and occupies less parking space. In terms of the powertrain, it adopts a pure electric drive system, making it highly energy-efficient and environmentally friendly.
11
0
Share

What is the purpose of adding urea solution to trucks?

Trucks add urea to purify exhaust emissions. Vehicles equipped with diesel engines generally require urea for exhaust purification. Here are several key differences between gasoline and diesel engines: 1. Gasoline engines have spark plugs; diesel engines do not. 2. Diesel engines are more efficient than gasoline engines. Although diesel engines generally have lower power output compared to gasoline engines, they produce higher torque. 3. Diesel engines also have better fuel economy than gasoline engines.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.