What is the ground clearance of the old Qashqai model?

2 Answers
Cupid
07/29/25 6:28pm
" The ground clearance of the Qashqai is 188 millimeters. The ground clearance of the Qashqai refers to the distance between the lowest point (excluding the wheels) and the supporting surface, which indicates the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. A higher ground clearance generally improves off-road capability, but if the Qashqai's ground clearance is too high, it may reduce stability at high speeds. The Qashqai was initially designed in 2012, with dimensions of 4401 mm in length, 1837 mm in width, and 1611 mm in height, and a wheelbase of 2646 mm. Generally, the ground clearance of sedans ranges between 110 mm and 150 mm, while SUVs have a ground clearance between 200 mm and 250 mm. However, the Qashqai's ground clearance is not static; it also depends on the load condition. Therefore, changes in ground clearance should be considered based on the Qashqai's load variations. When selecting a vehicle, ground clearance can be one of the reference factors. The choice should depend on the vehicle's intended use and the road conditions. For urban driving with well-paved roads, a vehicle with lower ground clearance may enhance stability and comfort. For frequent travel to rural areas or driving on rough terrain, a vehicle with higher ground clearance is advisable to avoid scraping or damaging the undercarriage, considering the vehicle's off-road performance. "
Was this review help?
19
5
Share
Emery
08/14/25 11:25am
I've been driving my 2010 Nissan Qashqai and remember its ground clearance is around 205mm, which is quite good among urban SUVs. When commuting over speed bumps or rough roads, I never worry about scraping the undercarriage - it feels much better than sedans and handles waterlogged potholes with ease. After long-term use, I noticed tire pressure affects actual clearance; insufficient pressure may reduce it to 190mm, so regular checks are recommended. As an experienced owner, I find this clearance strikes a balance between handling and off-road capability, sufficient for daily commutes and outings, though the slightly taller body requires attention to parking angles. Overall, the Qashqai's design is practical without being flashy, and its 205mm height ensures reliable performance in both urban conditions and light off-roading.
Was this review help?
15
1
Share
Expand All
More Forum Discussions

What is the wading depth of the Model 3?

The wading depth of the Model 3 should not exceed half the height of the tires. Definition of vehicle wading depth: The wading depth of a vehicle is determined by the height of the engine air intake. For most compact and small cars with low ground clearance, the air intake position serves as the benchmark when driving through flooded roads. The function of the air intake is to draw in air. If the water level exceeds the height of the air intake, a large amount of water can be sucked into the engine, causing severe damage to the vehicle. Symptoms of water entering the engine air intake: When the engine air filter element gets soaked in water, it increases intake resistance and allows water to enter the combustion chamber. This prevents the spark plugs from igniting properly. Additionally, if water enters the distributor cap, it disrupts the normal ignition function of the distributor, leading to engine stalling while driving.
8
4
Share

Model Y Black or Gray?

For practicality and safety, choose gray; for a more imposing look, opt for black. Below are the relevant details: Vehicle Specifications: The Tesla Model Y measures 4750mm in length, 1921mm in width, and 1624mm in height, with a wheelbase of 2890mm. Vehicle Positioning: The Tesla Model Y is a mid-size SUV introduced by Tesla China, equipped with either a pure electric 431-horsepower motor or a pure electric 461-horsepower motor, with total power outputs of 317kW and 339kW respectively, paired with a single-speed electric transmission. Drivetrain: The Tesla Model Y features a dual-motor all-wheel-drive system, with a front suspension type of double-wishbone independent suspension and a rear suspension type of multi-link independent suspension. The steering assistance is electric power steering, and the body structure is unibody.
13
4
Share

Is the first maintenance mileage 5,000 kilometers or 3,000 kilometers?

Under normal circumstances, the maximum duration for the first maintenance is six months or 5,000 kilometers. If there are special instructions in the vehicle's manual, follow the time specified in the manual. First maintenance content: Replace engine oil and oil filter; Check the operation of the braking system, such as the gap and wear of brake pads and discs; Tighten bolts of various systems; Check and adjust the drive belt; Check and adjust tire balance and alignment; Check and replenish various fluids; Check the operation of components such as lights, battery, and shock absorbers. First maintenance precautions: During the first maintenance of a new car, pay attention to the inspection of tire tread and pressure, which is related to driving safety. Additionally, remove small stones and other debris stuck on the tires, ensuring the front and rear tire pressure is uniformly inflated to 2.4 kg/cm². Also, perform a four-wheel alignment check, inspect tire pressure and wear condition, and rotate the tires if necessary due to wear.
13
5
Share

How to Open the Rear Part of a Panoramic Sunroof?

Panoramic sunroof opening method: To tilt open, press the sunroof switch button, and the sunroof will tilt open. Below is extended information about panoramic sunroofs: 1. Panoramic sunroofs offer a wide field of vision and excellent ventilation, making them a highlight in mid-to-high-end vehicles. With a larger area compared to standard car sunroofs, they better maintain fresh air inside the car. At high speeds, they are more effective than side windows in reducing interior noise and can quickly lower the cabin temperature, making them an excellent cooling solution for cars exposed to the sun. 2. Panoramic sunroofs are categorized into three types based on their opening mechanism: sealed, segmented opening, and full opening, each with distinct features. Essentially, panoramic sunroofs are larger in area compared to regular sunroofs, often featuring an entire glass roof that provides an unobstructed view of the sky above. Currently, many panoramic sunroofs consist of two separate glass panels, front and rear, giving both front and rear seat passengers the experience of having a sunroof.
2
1
Share

How to Determine if the Expansion Valve is Faulty?

Signs of a faulty expansion valve: 1. The low-pressure pipe is not cold to the touch; 2. Frost forms on the dryer bottle; 3. Frost forms on the condenser; 4. A hissing sound is heard when the expansion valve or condenser is not operating; 5. Abnormal high and low pressure levels and abnormal temperature in the high-pressure pipe. Relevant information about the expansion valve is as follows: 1. Location of the expansion valve: The expansion valve is an important component in the refrigeration system, typically installed between the liquid reservoir and the evaporator. 2. Working principle of the expansion valve: The expansion valve converts medium-temperature, high-pressure liquid refrigerant into low-temperature, low-pressure wet steam through throttling. The refrigerant then absorbs heat in the evaporator to achieve the cooling effect. The valve flow is controlled by changes in superheat at the end of the evaporator to prevent insufficient utilization of the evaporator surface and knocking phenomena.
9
1
Share

What is the difference between N gear and P gear?

N gear and P gear have the following specific differences: 1. Type: P gear is called the parking gear, while N gear is called the neutral gear. 2. Function: P gear is suitable for parking and stopping, while N gear is used for short-term parking. When shifting into N gear, the car will not shut off, but the power is not transmitted to the drive wheels, so the car will not move. However, the wheels do not have braking force, which poses a risk of rolling backward or moving. On the other hand, when shifting into P gear, the parking brake mechanism inside the transmission locks the output shaft, cutting off the car's power and providing a certain braking effect. 3. Clutch control: In P gear, the parking gear is partially locked inside the transmission, so the car has a certain parking effect on flat ground without pressing the brake. N gear is the neutral gear, where the engine and the drive shaft are completely separated at the transmission position, with no connection.
3
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.