What is the ground clearance of the Model 3?

1 Answers
LeJohn
07/30/25 12:43am
The ground clearance of the Model 3 is 138mm. The ground clearance of a car refers to the minimum ground clearance, which is the minimum distance between the bottom of the vehicle and the level ground when the car is at maximum load. The minimum ground clearance directly affects the car's passing performance. Initially, there were regulations on the minimum ground clearance of cars, which could not be lower than the minimum standard. However, with the continuous development of automobile production technology, this regulation has been gradually abolished, as some high-end brand cars use air suspension, allowing the adjustment of the chassis height according to the driving conditions during operation. The Model 3, launched by Tesla in 2017, is not a scaled-down version of the Model S but is built on an entirely new platform.
Was this review help?
17
0
Share
More Forum Discussions

Is it safe if the car sensor is broken?

Damage to the car sensor can directly affect driving safety to a certain extent. If the wheel speed sensor is damaged, it not only causes slight deviations in the speed display on the dashboard but also leads to unstable engine idling and reduced acceleration performance. The main sensors in a car are as follows: 1. Airflow sensor: The airflow sensor is usually installed between the air filter and the throttle body to measure the amount of air inhaled by the engine, converting it into an electrical signal provided to the ECU as a reference signal for fuel injection timing. If it malfunctions, the car may experience idling vibrations, weak acceleration, increased fuel consumption, and black smoke from the exhaust pipe, thereby affecting the engine's performance. 2. ABS sensor: The ABS sensor is typically located near the wheel bearing, outside the hub bearing and inside the brake disc, to monitor the vehicle's speed. During emergency braking, it feeds the wheel speed back to the braking system, which then controls the wheel's rotation to achieve optimal braking effect. If it fails, the ABS will not function, causing the wheels to lock up during emergency braking, leading to skidding and loss of control. 3. Throttle position sensor: The throttle position sensor is installed on the throttle body to detect the throttle opening. It works in conjunction with the throttle via a lever mechanism, measuring the throttle opening angle's voltage signal and transmitting it to the ECU as a reference signal for fuel injection volume and ignition timing correction. If it malfunctions, it can result in abnormal engine idling, engine vibrations, and delayed acceleration response.
18
1
Share

Why does the car fail to start on the first attempt when cold but succeeds on the second try?

There are several reasons why a cold car fails to start on the first attempt but succeeds on the second try: 1. Check the spark plugs: Inspect the ignition and combustion condition of the spark plugs. The ignition energy of the spark plugs directly affects combustion in the cylinder, thus impacting startup. Therefore, the first step is to check the spark plugs. 2. Clean the fuel injectors: Poor atomization of the fuel injectors also affects combustion and can cause difficulty in starting. A key function of fuel injectors is to atomize fuel for complete combustion. 3. Check fuel pressure: Insufficient fuel pressure or poor supply can lead to inadequate fuel injection, affecting startup. A clogged fuel filter or a leaking pressure valve on the fuel pump can cause fuel pressure loss in the fuel lines, requiring pressure to be rebuilt each time the car starts. This is the most critical and easily overlooked issue. 4. Charcoal canister solenoid valve: This is another easily overlooked component. The charcoal canister solenoid valve controls the entry of fuel vapor from the fuel tank into the engine for combustion. If too much fuel vapor enters the engine, it can cause an overly rich air-fuel mixture, leading to difficulty in starting. 5. Excessive carbon buildup can also cause starting difficulties: This is the hardest issue to address. For naturally aspirated engines, carbon buildup under normal usage within 80,000 kilometers usually doesn’t have a significant impact. However, direct-injection turbocharged engines tend to have more severe carbon buildup by 80,000 kilometers compared to naturally aspirated engines.
3
2
Share

What is the method to reset the maintenance reminder light on the Ford Kuga?

Sit in the car, close the door, and turn the ignition to the second position. Then press the accelerator and brake pedals simultaneously to the floor. After about 10 seconds, the information center will display a prompt. Continue holding the pedals for about 30 seconds, and the information center will show "OIL-LIFE-RESET-COMPLETE," indicating the operation is complete. Additional information is as follows: 1. Vehicle Introduction: The Ford Kuga inherits over half a century of research, design, manufacturing, and tuning expertise from the Ford SUV family. Its exterior is more sporty and stylish, and the center console features a new 10-inch LCD screen paired with an advanced internet-based car intelligent system. The optimized rear seating space improves knee room for passengers, enhancing overall comfort. 2. Performance: The EcoBoost® series engines are known for their powerful, quick-start, and sustained acceleration capabilities. Particularly, the class-leading EcoBoost® 245 engine utilizes twin-scroll turbocharging technology, enabling earlier turbo engagement and more rapid power delivery. It delivers a maximum power of 180 kW at 5500 rpm and a peak torque of 350 Nm between 1750-4000 rpm, paired with an intelligent AWD system.
9
0
Share

Is driving at 30 mph too slow for a beginner?

It is recommended to stay in the slow lane. As long as the speed complies with the speed limit, driving at 30 mph is not considered slow for a beginner. On the road, you can drive at 20 mph or 40 mph, but it should be determined based on the road's speed limit. Here are some relevant tips: 1. Follow traffic rules: If your driving skills are not yet proficient, try to avoid practicing on roads with heavy traffic. Driving too slowly will only affect traffic flow, cause congestion, and may even lead to accidents. 2. Precautions: If you are not confident in driving fast, consider having an experienced driver accompany you for practice. It's best to master the essentials of driving before hitting the road.
3
0
Share

How is the quality of the Changan Ford Focus?

The Focus offers good value for money among its peers. Particularly in terms of handling, the chassis is very solid, and the suspension is excellent, featuring independent suspension both front and rear, giving it a strong sporty feel. The all-aluminum engine reduces the overall weight of the car. It is paired with a 6-speed automatic transmission, which provides excellent power delivery. Below are the specific details: 1. Exterior: The new car continues Ford's signature "Martin face" design, with a new headlight assembly equipped with LED light sources and a continuous LED daytime running light strip. The front bumper has a sporty overall shape, and the opening design at the fog light positions on both sides is also very dynamic. 2. Powertrain: The domestically produced new Focus offers three powertrain options for consumers to choose from. The most powerful among them is the 1.5T three-cylinder engine (EcoBoost180), which is an imported model produced at Ford's Chihuahua engine plant in Mexico, delivering a maximum power of 184 horsepower, an increase of 3 horsepower compared to the current model. The 1.5L three-cylinder and 1.0T three-cylinder engines deliver maximum powers of 122 horsepower and 127 horsepower, respectively.
9
1
Share

What is the Ford maintenance password?

Ford maintenance password is 75315908. Car maintenance refers to the preventive work of regularly inspecting, cleaning, supplying, lubricating, adjusting or replacing certain parts of the car, also known as car servicing. Modern car maintenance mainly includes the maintenance scope of engine system, transmission system, air conditioning system, cooling system, fuel system, power steering system, etc. The following are the benefits of regular maintenance: Ensure driving safety: Problems in all aspects of the car can be solved, greatly improving driving safety. Reduce car fuel consumption: Brake system, air conditioning system, etc. are important factors affecting fuel consumption. Good maintenance of these systems can also reduce car fuel consumption. Extend the service life of the car: Car maintenance will make the entire operation of the car smoother, reduce engine wear, thereby extending the service life of the car. Reduce car parts failure: Various parts on the car need to run in with each other. Regular maintenance can effectively reduce the failure rate of the car.
1
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.