What is the ground clearance of the Mazda CX4?

Where is the clutch located on the Tiggo 3?

The clutch of the Tiggo 3 is located between the engine and the transmission. The clutch disc is a composite material that primarily functions through friction while also meeting structural performance requirements. Friction materials in automobiles are mainly used to manufacture brake friction pads and clutch discs. The Tiggo 3 is a model under the Chery brand, with body dimensions of 4420mm in length, 1760mm in width, and 1670mm in height, and a wheelbase of 2510mm. In terms of power, the Tiggo 3 is equipped with two engines across its lineup: a 1.5-liter naturally aspirated engine and a 1.6-liter naturally aspirated engine. The 1.5-liter naturally aspirated engine delivers a maximum power of 85kW and a maximum torque of 143Nm, while the 1.6-liter naturally aspirated engine produces a maximum power of 93kW and a maximum torque of 160Nm.

9

5

Share

Where is the fuse box of Volkswagen Touran located?

Volkswagen Touran fuse box is located on the left side of the center console, inside the panel above the driver's footwell. The car fuse box is used to install car fuses, and can be divided into small car fuse box, medium car fuse box, and large car fuse box according to the size of the installed fuses. Volkswagen Touran is a model under SAIC Volkswagen, with body dimensions of 4395mm in length, 1795mm in width, 1634mm in height, and a wheelbase of 2678mm. In terms of appearance, Volkswagen Touran features stylish smoked headlights, attractive smoked taillights, crystal dynamic front fog lights, and a nickel-chrome horizontal dynamic grille. In terms of power, Volkswagen Touran is equipped with a 1.4TSI engine, paired with a DSG seven-speed dual-clutch transmission.

9

0

Share

What Are the A-Pillar and B-Pillar in a Car?

Car A-pillar and B-pillar are abbreviated terms for the body pillars. Generally, a sedan body has three pillars, which are sequentially the front A-pillar, middle B-pillar, and rear C-pillar from front to back. For sedans, these pillars not only serve as supports but also function as door frames. The A-pillar is the connecting pillar between the left front and right front, linking the roof and the front compartment. Located between the engine compartment and the cockpit, above the left and right rearview mirrors, it partially obstructs the turning view. The B-pillar is the part between the two side windows, next to the front door, primarily supporting the front door with its strength. The C-pillar is the part next to the rear door, mainly used to support the rear door.

13

0

Share

Can the Haval H6 Coupe be started remotely?

Haval H6 Coupe can be started remotely. Functions of remote start: You can use the remote start to control the car at a relatively long distance, which is a practical system; in winter, you don't have to brave the cold to start the car, as you can start and warm up the car remotely; after about 10 minutes, the water temperature inside the car will rise significantly, thus increasing the interior temperature and improving driving comfort. Car keys have built-in chips: The main driver's seat in the car also has a corresponding chip. The car can only be started and driven when the vehicle senses the one-to-one built-in chip in the car key.

20

1

Share

What is the ground clearance of the CR-V?

The ground clearance of the CR-V is 185 millimeters. The CR-V is a compact SUV under the Honda brand. This vehicle is equipped with two types of engines: a 1.5-liter turbocharged engine and a 2.0-liter naturally aspirated engine. In terms of body dimensions, the CR-V measures 4550mm in length, 1820mm in width, and 1685mm in height, with a wheelbase of 2620mm. Exterior-wise, the CR-V features a stylish and dynamic design with smooth and rounded lines that maintain a sporty appeal. For the interior, the CR-V adopts Honda's family-style design, with a clean and warm two-tone interior. The three-spoke steering wheel offers a good grip, and the configuration is practical, with improved material quality and craftsmanship.

7

1

Share

At what temperature does the fan of Audi C7 start working?

The radiator fan of the engine starts working at around 90 degrees. When the temperature reaches approximately 105 degrees, the fan begins to operate at a high-speed setting. The radiator fan automatically turns on only after the vehicle's engine has been running for a certain period, and the temperature rises, causing the engine's coolant temperature to increase. The function of the car fan: The car fan blows towards the radiator to cool it down and dissipate heat from the engine. When the fan rotates, it creates suction, accelerating the airflow along the axial direction, which speeds up the cooling of the coolant flowing through the radiator core. At the same time, it helps cool the engine block's outer shell and surrounding components. Engine cooling system: Automobile engines operating in high-temperature environments must be adequately cooled to maintain an optimal working temperature. This ensures the engine's good performance, durability, and compliance with exhaust emission requirements.

20

2

Share

What is the ground clearance of the Mazda CX4?

Where is the clutch located on the Tiggo 3?

Where is the fuse box of Volkswagen Touran located?

What Are the A-Pillar and B-Pillar in a Car?

Can the Haval H6 Coupe be started remotely?

What is the ground clearance of the CR-V?

At what temperature does the fan of Audi C7 start working?

What is the tire size of the Magotan 330?

What are the hidden features of the 2009 Classic Sylphy?

What to Do When the Parking Brake Fails?

What is the model number of the Camry's high beam bulb?