What is the ground clearance of the Lynk & Co 03 in centimeters?

What does the wrench indicator light on the dashboard mean?

The wrench indicator light on the dashboard is a maintenance reminder light, which serves to alert the owner that the vehicle requires maintenance. Here are the detailed explanations: 1. The maintenance reminder light does not indicate a vehicle malfunction. It functions as a timer, notifying the owner when it's time for maintenance. Typically, the maintenance staff will reset the maintenance light after servicing is completed. 2. If the maintenance light remains on after servicing, you can reset it yourself. Many modern vehicles allow this operation via buttons on the multifunction steering wheel. By navigating the menu to access the maintenance light interface on the dashboard, you can reset it. Different vehicle brands may have varying methods for resetting the maintenance light; the standard procedure can be found in the owner's manual. 3. Generally, vehicle maintenance includes the following eight items: engine oil, oil filter, transmission fluid, spark plugs, cabin air filter, engine air filter, fuel filter, and brake fluid.

5

3

Share

What Are the Precautions for Novice Drivers?

Introduction to precautions for novice drivers: 1. Maintain a good driving mindset. Novice drivers often feel nervous, which is not conducive to normal road driving. When people are flustered, they are prone to making wrong judgments. Therefore, novice drivers should adjust their mindset before hitting the road. 2. Strictly adhere to traffic regulations. According to traffic department statistics, over 80% of traffic accidents are caused by violations by one party. Following traffic rules is the most crucial point among the precautions for novice drivers, as it can minimize the probability of traffic accidents. 3. Control the steering wheel properly while driving. Novice drivers must master the five basic principles: starting, stopping, turning, shifting gears, and braking. These principles should be applied flexibly according to actual conditions. 4. Perform car maintenance before departure. Novice drivers must ensure regular car maintenance before driving. Additionally, always check the vehicle's condition before each drive, such as walking around the car to inspect for oil leaks and checking the tire pressure of all four wheels. 5. Be cautious when driving at night. Night driving offers poorer visibility, making it harder to see far ahead, which can easily cause panic among novice drivers. Novice drivers should first ensure they drive slowly at night. If there are streetlights, use low beams. If there are no streetlights and no vehicles ahead, high beams can be used, but they must be switched to low beams when another vehicle approaches. Always be aware of pedestrians and other obstacles on the roadside.

11

2

Share

What does the API index of engine oil mean?

API index refers to the grade of engine oil. On the packaging of engine oil, you can frequently see labels such as SN, SM, etc., which represent the API index. The higher the grade, the better the quality of the engine oil. The API classification of oil grades is primarily based on environmental indicators rather than performance indicators. Below is an introduction to the API index: 1. The API (American Petroleum Institute) standard is a widely recognized international standard for lubricating oil quality grades. It uses a two-letter code to indicate the quality level of the oil and the type of engine it is suitable for. The first letter 'S' indicates that it is suitable for spark ignition, i.e., gasoline engines. The first letter 'C' indicates that it is suitable for compression ignition, i.e., diesel engines. The second letter represents performance within different categories, ranging from A, B, C, etc., in ascending alphabetical order. The further the letter is in the alphabet, the higher the grade. 2. Generally, SH-grade oil contains 1300ppm of zinc and 1200ppm of phosphorus. SN-grade oil contains less than 870ppm of zinc and less than 800ppm of phosphorus.

2

5

Share

How to Check if a Vehicle Has ETC?

Bring relevant documents such as your ID card and vehicle license to a bank branch for inquiry. The significance of applying for ETC is as follows: 1. Banks have strict application procedures and formalities for ETC dedicated lanes. By collecting ETC information from toll stations, the scope of tracking vehicles with electronic tags can be narrowed. 2. The website interactive service information of the fully automatic electronic toll collection system (such as comprehensive operational information applicable to highway incident detection, congestion prediction, and travel time prediction, management information, planning and construction information, and even the release of guidance information) can provide feedback on customer information and user credibility. 3. The fully automatic electronic toll collection system can be integrated with GPS and GIS, which not only comprehensively improves the efficiency and level of highway transportation management and services but also allows tracking of the dynamic whereabouts of ETC customers. 4. By tracking bank consumption information, customer spending records can be obtained, which helps in finding clues during investigation and case handling.

12

4

Share

Should Brake Pads Be Replaced on All Four Wheels Together?

Generally, brake pads do not need to be replaced on all four wheels at the same time. Here are the detailed explanations: 1. The wear and service life of front and rear brake pads often differ. Under normal driving conditions, the front brake pads bear greater braking force, leading to more significant wear and a shorter lifespan. They typically need replacement every 30,000 to 50,000 kilometers. 2. The rear brake pads experience less braking force and thus last longer, usually requiring replacement every 60,000 to 100,000 kilometers. When replacing, both pads on the same axle must be changed together to ensure even braking force distribution. 3. If both front and rear brake pads have reached a certain level of wear, they can be replaced all four together.

8

3

Share

Solutions for Unstable Idle Speed

The causes and solutions for unstable idle speed are as follows: 1. Idle switch not closing: When idling, turn on the air conditioning or steer the wheel, and the engine speed does not increase. Solution: Adjust, repair, or replace the throttle position sensor. 2. Air intake pipe leakage: There is an abnormal noise from the air intake pipe indicating a leak. Solution: Locate the leak, reseal, or replace the relevant components. 3. Idle Speed Control (ISC) valve failure: Check the operating sound of the idle speed control valve; if there is no sound, the idle speed control valve is faulty. Solution: Clean or replace the idle speed control valve and use a dedicated decoder to perform a basic setting for the idle speed.

12

2

Share

What is the ground clearance of the Lynk & Co 03 in centimeters?

What does the wrench indicator light on the dashboard mean?

What Are the Precautions for Novice Drivers?

What does the API index of engine oil mean?

How to Check if a Vehicle Has ETC?

Should Brake Pads Be Replaced on All Four Wheels Together?

Solutions for Unstable Idle Speed

What to Do When the Steering Wheel Shakes After Changing Tires?

What Does It Mean When the EPC Warning Light Comes On?

What is the normal range for coolant temperature?

What is the fuel consumption per 100 kilometers for a 1.6L engine?