What is the ground clearance of the Honda XRV?

1 Answers
SanMaximus
07/29/25 6:02pm
The ground clearance of the Honda XRV is 130mm when fully loaded and can reach up to 142mm. Below is an introduction to the Honda XRV: 1. The length, width, and height of the Honda XRV are 4328mm, 1772mm, and 1605mm respectively, with a wheelbase of 2610mm. The exterior design of the Honda XRV follows the family style, exuding a strong sense of fashion and sportiness, incorporating many youthful design elements that align more with the aesthetic preferences of younger consumers. 2. The Honda XRV is equipped with two engines: a 1.5L and a 1.5T, paired with two types of transmissions: a 6-speed manual transmission and a CVT continuously variable transmission. The 1.5L engine has a maximum output power of 96 kW, a maximum torque of 155 N·m, a top speed of 192 km/h, a 0-100 km/h acceleration time of 11.1 seconds, and a combined fuel consumption of 6.3L/100km as published by the Ministry of Industry and Information Technology. The 1.5T engine has a maximum output power of 130 kW, a maximum torque of 220 N·m, a top speed of 200 km/h, a 0-100 km/h acceleration time of 8.9 seconds, and a combined fuel consumption of 6.1L/100km as published by the Ministry of Industry and Information Technology.
Was this review help?
12
0
Share
More Forum Discussions

Is the Mazda 8 domestically produced?

Mazda 8 is domestically produced. It is an MPV launched by FAW Mazda. The official guide price of this car ranges from 219,800 to 259,800 yuan. In terms of appearance, this car adopts a family-style design. The front of the car features a large-sized air intake grille, which is also decorated with chrome trim. Viewed from the side, the waistline extends from the front to the rear of the car, lengthening the body to a certain extent. In terms of body size, this car measures 4860*1852*1685mm with a wheelbase of 2950mm. As an MPV, this car has outstanding performance in terms of space. It is worth mentioning the flexible seat layout inside the car. In terms of power, this car is equipped with a 2.3-liter and a 2.5-liter naturally aspirated engine. Among them, the 2.3L engine has a maximum power of 113kw and a maximum torque of 205nm. The 2.5L engine has a maximum power of 120kw and a maximum torque of 226nm. In terms of the transmission system, the engine is matched with a 4-speed automatic transmission and a 5-speed automatic transmission. The engine used in this car is also used in many models of Mazda.
1
3
Share

What causes loud abnormal noise when the Nissan Sylphy's air conditioning is turned on?

Sylphy air conditioning abnormal noise reasons include air conditioning compressor failure, air conditioning belt slippage or wear, air conditioning pipeline blockage, electromagnetic clutch failure, foreign objects in air conditioning vents, etc. Air conditioning compressor failure: If the air conditioning compressor fails, it will cause abnormal noise or failure to cool/heat in the car's air conditioning system. This situation is relatively complex and it's best to have professionals at a repair shop or 4S store conduct detailed inspection. Air conditioning belt slippage or wear: If the air conditioning belt is loose, it will slip or idle, causing abnormal noise. If the air conditioning belt is severely worn, friction will also produce abnormal noise. In this case, it's best to directly replace with a new belt. Air conditioning pipeline blockage: If pipelines in the air conditioning system are blocked, internal gas cannot circulate normally, producing abnormal noise. This requires inspection and cleaning of the entire pipeline system of the car's air conditioning. Electromagnetic clutch failure: If foreign objects enter the electromagnetic clutch, it will cause bearing noise. This requires cleaning and repair of the electromagnetic clutch. Foreign objects in air conditioning vents: If there are foreign objects in the air conditioning vents, abnormal noise will naturally occur during air delivery. This only requires cleaning.
14
1
Share

What causes the Lavida Plus infotainment screen to freeze and reboot?

There are generally two scenarios when the infotainment screen freezes and automatically reboots: 1. Hardware failure, hardware conflicts, or poor hardware connections. 2. Software issues, conflicts between software and hardware, or between software components. You can perform the following troubleshooting steps: 1. Force restart; 2. If the issue persists, perform a system upgrade or firmware update; 3. If the problem remains, restore the device to factory default settings; 4. If none of these steps work, it's likely a hardware issue, and professional repair is recommended. Here are the reboot solutions: 1. Press the power button on the center console to restart; 2. Turn off the engine and restart the vehicle.
9
0
Share

What are the types of violations that result in point deductions?

Here is an introduction to violations that result in point deductions: 1. Deduction of 6 points: Running a red light while driving; driving without a license during the period when the motor vehicle driving license is temporarily suspended; stopping in the lane of a highway; driving a commercial vehicle with passengers exceeding 20% of the approved capacity; illegally occupying the emergency lane while driving on a highway or urban expressway; failing to drive according to regulations on highways under low visibility conditions; driving a motor vehicle at a speed exceeding 50% of the specified limit; transporting oversized or indivisible goods without following the designated time, route, speed, or without displaying obvious signs; failing to yield to special emergency vehicles as required while driving; obtaining a replacement motor vehicle driving license through concealment or deception. 2. Deduction of 12 points: Driving a motor vehicle that does not match the driver's license; driving a commercial vehicle under the influence of alcohol or driving a motor vehicle while intoxicated; fleeing the scene after causing a traffic accident without constituting a crime; driving a passenger vehicle with passengers exceeding 20% of the approved capacity; missing an exit on the highway and reversing, crossing the central divider to turn around, or driving in the opposite direction; driving a vehicle without a license plate or intentionally covering, damaging, or failing to install the license plate as required; using a forged driving license, motor vehicle registration certificate, license plate, etc.
4
4
Share

What Documents Are Required to Obtain the Inspection Exemption Label?

Here is the introduction to the documents required for inspection exemption: Documents: Original vehicle registration certificate; Original ID card of the vehicle owner. If the process is delegated to another person, the original ID card of the delegate and a written power of attorney signed by the vehicle owner are also required. Additionally, for company vehicles, the original unified three certificates of the company must be provided; Valid compulsory traffic insurance policy for the current year. After purchasing compulsory traffic insurance, a copy of the original policy and a duplicate will be provided. Note that the traffic management office will retain the duplicate of the compulsory traffic insurance policy upon application; Valid tax or tax exemption certificate for the current year. Generally, insurance companies will collect the vehicle and vessel tax upon renewal and note it on the compulsory traffic insurance policy, so only the original and duplicate of the compulsory traffic insurance policy need to be provided. Inspection Exemption: Inspection exemption refers to the activity where products meeting specified conditions are exempt from quality supervision inspections conducted by government departments. If a company's product qualifies for inspection exemption, during the exemption period, first, no government departments at the national, provincial, municipal, or county levels may conduct quality supervision inspections; second, no quality supervision inspections may be conducted in any province nationwide; third, no quality supervision inspections may be conducted in either the production or the distribution sectors.
16
0
Share

What brand is UltraContact UC6?

UltraContact UC6 and another product, ComfortContact CC6, are two new products launched by Continental Tires in September last year. Here are the specific details: 1. UC6 uses diamond-cut tread technology, with chamfered cuts at the edges of the tread blocks. The benefit is that it prevents the tread blocks from curling during braking, ensuring more even pressure distribution on the tire contact patch and increasing the effective contact area. If the road is wet, the edges of the tread blocks can also scrape off the water film, further enhancing contact with the road surface. This tire should perform well in both dry and wet braking conditions. 2. UC6 also features a unique rubber compound. The tread uses a hybrid rubber formula combining grip-enhancing rubber for better braking and handling with wear-resistant rubber for increased mileage.
19
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.