What is the ground clearance of the Haval H2s?

1 Answers
StLogan
07/30/25 2:27am
The ground clearance of the Haval H2s is 180mm. Ground clearance, also known as the minimum ground clearance, refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary. It is used to indicate the vehicle's ability to pass over obstacles such as rocks and tree stumps without collision. The Haval H2s is positioned as a compact SUV, with body dimensions of 4195mm in length, 1772mm in width, and 1638mm in height, a wheelbase of 2550mm, and a seating capacity of 5. In terms of suspension, the Haval H2s features a MacPherson strut front suspension and a torsion beam rear suspension.
Was this review help?
12
3
Share
More Forum Discussions

How to Deal with Unpleasant Odor from Car Heater?

When unpleasant odor occurs in the car heater, the following methods can be used to address it: 1. High-temperature drying of the evaporator: After parking, set the car air conditioner to the highest temperature of 32℃, and let the warm air dry the moisture in the air conditioner evaporator and air ducts. This operation not only quickly dries the evaporator box and ventilation ducts but also kills some of the mold present on the car air conditioner evaporator box and ventilation ducts. 2. Use a cleaning agent for external circulation duct sterilization: Use an air duct cleaning agent to sterilize the external circulation ducts. This method can partially eliminate the odor. 3. Alternate use of main and spare filters: Prepare a spare filter. When the air filter gets damp, replace it with the spare one, then clean and dry the damp filter for future use.
10
3
Share

What Causes the Steering Wheel to Become Lighter?

The reason the steering wheel becomes lighter is due to a malfunction in the computer controlling the electronic power assist. Below is supplementary information about the electronic power steering system: 1. Structure: This system mainly consists of components such as a torque sensor, vehicle speed sensor, motor, reduction mechanism, and electronic control unit. 2. Working Principle: When the steering wheel is turned, the torque sensor detects the direction and magnitude of the steering torque. The electronic control unit then uses data like vehicle speed and turning direction to control the motor to output the corresponding magnitude and direction of assist. Since the motor does not operate when the vehicle is not turning, this significantly reduces energy consumption. 3. Advantages: Because the electric power steering system is electrically driven, it can operate independently of the engine, reducing the engine's fuel consumption while providing better handling and comfort.
6
5
Share

Is it illegal to drive in slippers?

Driving in slippers is considered illegal and may result in corresponding administrative penalties. Below is relevant information about driving in slippers: 1. Penalty: Driving in slippers, similar to making or answering handheld phone calls, hinders safe driving. Therefore, driving in slippers or high heels may result in a penalty of 2 demerit points and a fine of 100 yuan. 2. Hazards: Driving in slippers reduces foot flexibility, leading to delayed braking response. It also increases the risk of the foot separating from the slipper, making it impossible to brake, which is highly dangerous. In addition to slippers, high heels are also prohibited for driving, as well as driving barefoot. Other footwear like wedge heels and snow boots are also unsuitable for driving.
18
2
Share

How to Adjust the Position of Electric Seats?

When adjusting the position of an electric seat, you can push the control button forward or backward to move the seat to the desired position. The seat will remain fixed at this position once the button is released. Below is relevant information about automotive electric seats: 1. Definition: An electric seat refers to a seat that uses an electric motor as the power source, adjusting various positions of the seat through transmission devices and actuators to provide comfort for the driver or passengers. 2. Function: To provide the driver with a convenient, comfortable, and safe driving position. To offer passengers a comfortable, safe, and fatigue-resistant seating position. 3. Requirements: The arrangement within the vehicle must be appropriate, especially the driver's seat, which must be positioned optimally for driving.
9
3
Share

What to Do If Your Vehicle Fails the Environmental Inspection?

There are many reasons why a vehicle may fail the environmental inspection, primarily due to excessive levels of CO, HC, NO, etc. Below is relevant information about vehicle inspections: 1. Definition: Vehicle inspection, also known as annual inspection, is conducted by the traffic police department to assess the annual performance and condition of a vehicle. New vehicles are inspected every two years. 2. Exemption Policy: The Municipal Traffic Police Corps reminds that the so-called exemption only refers to waiving the on-site inspection. Vehicle owners still need to undergo a regular inspection every 2 years. After providing proof of compulsory traffic accident liability insurance, payment or exemption of vehicle and vessel tax, and resolving any traffic violations or accidents, they can directly apply to the traffic management department for the inspection label. However, if the vehicle is involved in a traffic accident causing casualties during the exemption period, the original inspection requirements will be reinstated.
17
0
Share

Where is the ea15-ab engine produced?

ea15-ab engine is produced in Chongqing, and it is an engine independently developed by Changan Automobile Manufacturing Company. Changan OnoS is equipped with a 1.5L gasoline engine, which is the ea15-ab engine, with a maximum power of 78.5kW, a maximum torque of 145Nm, and a maximum horsepower of 107. For the daily maintenance of the ea15-ab engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected according to the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to the mechanical load, and the selection standard should not be lower than the requirements specified by the manufacturer; Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance will deteriorate, causing various problems to the engine. To avoid failures, the oil should be changed regularly according to the usage conditions, and the oil level should be moderate; When the oil passes through the fine holes of the filter, solid particles and sticky substances in the oil accumulate in the filter. If the filter is blocked and the oil cannot pass through the filter element, the filter element will burst or the safety valve will open, allowing the oil to pass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and internal pollution; Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston ring and the cylinder wall, mixing with metal powder generated by part wear to form sludge. When the amount is small, it is suspended in the oil; when the amount is large, it precipitates from the oil, blocking the filter and oil holes, making engine lubrication difficult and causing wear; Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall life of the radiator and the engine.
15
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.