What is the ground clearance of the Fit?

1 Answers
LeVincent
07/30/25 10:58am
The minimum ground clearance of the Fit is 105mm. Below are detailed specifications about the Fit: 1. Overview: The Fit is a hatchback launched by GAC Honda. The third-generation Fit was released on May 29, 2014, positioned as a "trendy and cool hatchback" for the new generation of "post-90s" who pursue individuality, featuring a spacious interior. 2. Other specifications: The vehicle weight ranges from 1058 to 1110kg. The wheelbase is 2530mm. The dimensions are 4065/1695/1525mm. The fuel consumption is between 5.3 to 5.7L/100km. The fuel tank capacity is 40L. The engine type is an inline four-cylinder/16-valve/i-VTEC/DOHC/direct injection. The standard seating capacity is 5. The top speed is 172km/h. The drivetrain is front-engine, front-wheel drive.
Was this review help?
15
2
Share
More Forum Discussions

Does the car speedometer display average speed or instantaneous speed?

The reading on the car speedometer shows instantaneous speed. Below is a detailed introduction about the vehicle speed sensor: 1. Working principle: The vehicle speed sensor consists of a permanent magnet, magnetic poles, coils, and a gear ring. When the gear ring rotates in the magnetic field, the gap between the gear ring's tooth tips and the electrodes changes at a constant speed, causing variations in the magnetic reluctance of the magnetic circuit. The magnetic flux periodically increases and decreases, generating an induced voltage at both ends of the sensor coil that is proportional to the rate of change of the magnetic flux. This AC voltage signal is directly sent to the car's control computer to ensure stable vehicle performance. 2. Installation location: It is generally installed inside the drive axle housing or transmission housing, with the sensor's signal wires enclosed in a shielded casing.
20
0
Share

Should You Cover Your Car with a Car Cover in Summer Heat?

It is possible to cover your car with a car cover in summer heat, but avoid parking the vehicle in direct sunlight. Otherwise, covering the car may actually increase the interior temperature, which can damage the car's paint and even the interior. Additional information: Benefits of using a car cover: 1. Covering your car not only protects it from intense sunlight but also prevents corrosive substances like dust, tree sap, and bird droppings from harming the paint, thus better preserving the finish. 2. Using a car cover in summer heat also helps protect the vehicle's interior, as temperatures inside a car exposed to direct sunlight can reach 70-80 degrees Celsius, while covering the car keeps the temperature around 30-40 degrees, slowing down interior aging. If you use your car frequently, to prevent the interior temperature from rising due to sun exposure, you can install sunshades on the front and rear windshields.
15
5
Share

Will 5W30 oil become too thin in summer?

Using 5W30 oil in summer can be too thin. 5W30 is suitable for all seasons and can be used in most regions of China, except for extremely cold or hot areas. For example, in Hainan where summers are particularly hot, it's better to use higher viscosity engine oil. Below is relevant information about choosing engine oil: 1. The selection of engine oil should be based on the requirements of the engine. It's unnecessary to use premium oil in engines with lower requirements, and lower-grade oil shouldn't be used in engines with higher requirements. 2. Multi-grade oil is recommended as it is economical, long-lasting, and efficient, providing better protection for the engine. Due to the characteristics of multi-grade oil, phenomena such as premature darkening and lower oil pressure compared to conventional oil may occur during use, which are normal.
13
3
Share

How Often Should a Motorcycle Be Ridden?

Motorcycles should be ridden at least once a month. If left unused for too long, the engine oil will gradually settle into the oil pan, leaving components such as the cylinder head, piston, middle cylinder, and valve train exposed to air without lubrication. Over time, these parts will oxidize. Both gasoline and air contain trace amounts of moisture, which can slowly react with metal surfaces, causing oxidation. Therefore, it is essential to periodically start and run the motorcycle. Motorcycles are two- or three-wheeled vehicles powered by gasoline engines and steered via handlebars. They are lightweight, agile, and fast, making them widely used for patrols, passenger and cargo transport, as well as for sports equipment. A motorcycle consists of five main components: the engine, transmission system, running gear, braking system, and electrical instrumentation.
18
3
Share

Can vehicle inspection be done directly in another location?

Except for large passenger buses and school buses, which cannot undergo annual inspection in another location, all other vehicles can be inspected in a different location. Currently, the traffic management authorities have fully implemented cross-province annual inspections for small cars, trucks, and medium-sized passenger vehicles. Applicants can directly undergo inspection in provinces other than the vehicle's registration location and obtain the inspection qualification mark without needing to apply for an entrusted inspection procedure. Large passenger buses and school buses cannot be inspected in another location and must return to the vehicle's registered location for inspection. Annual inspection time requirements: Small and micro non-operational passenger vehicles are exempt from inspection for the first 6 years. After 6 years but less than 10 years, they must be inspected every two years; after 10 years but less than 15 years, they must be inspected annually; after 15 years, they must be inspected every 6 months. Operational passenger vehicles must be inspected annually within the first 5 years; after 5 years, they must be inspected every 6 months. Trucks and large and medium-sized non-operational passenger vehicles must be inspected annually within the first 10 years; after 10 years, they must be inspected every 6 months. Imported vehicles, like other vehicle types, can undergo regular inspection at any inspection site. Annual inspection precautions: Vehicles that fail the annual inspection must be repaired within a specified time limit. If they still fail after the deadline, the vehicle management office will confiscate their license plates and prohibit further driving. Vehicles that do not participate in the annual inspection without reason or fail the inspection are not allowed to drive on the road or transfer registration. Vehicles that meet the scrapping conditions or have exceeded the prescribed service life will not be inspected, and their license plates will be revoked, their records deleted, and they will be scrapped.
11
1
Share

What Type is a Regular Driver's License?

According to the regulations on motor vehicle driver's license operations issued by the publishing department, regular driver's licenses adopt a classification system, which can be divided into 15 levels: a1, a2, a3, b1, b2, c1, c2, c3, c4, d, e, f, m, n, p. Among them, the a1 license permits driving large passenger vehicles, while the a2 license permits driving tractors and heavy or medium-sized full trailers or semi-trailer vehicle combinations. A driver's license is a legal document issued by the administrative department to individuals who are legally permitted to learn to drive motor vehicles, have mastered traffic regulations and driving skills through study, and have passed the official examination, authorizing them to drive certain types of motor vehicles.
20
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.